阳离子共聚物的反相悬浮聚合

采用反相悬浮聚合方法合成颗粒状的阳离子型高分子絮凝剂。选用丙烯酰胺(Am)和氯化[N,N,N-三甲基乙醇丙烯酸酯]盐(AQ)两种单体,研究反应体系的特征及影响分子量的基本因素,诸如温度、单体浓度、引发剂浓度、分散剂浓度、水相和油相的体积比(Vw/Vo)对分子量的影响。为了选择出最佳原料比,本文对两种单体的原料比进行了研究。实验中还发现亚硫酸钠是一种优良的缩短反应诱导期、加速反应进程的试剂。     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

金属氧化物降解六氯苯的活性比较及催化机理研究

以氧化铝(α-Al_2O_3、γ-Al_2O_3)、氧化钙(CaO)、过渡金属氧化物(Mn O_2、α-Fe_2O_3、γ-Fe_2O_3、Ni_2O_3、CuO)为催化剂,考察了催化剂种类、添加比例等因素对六氯苯(Hexachlorobenzene,HCB)降解效果和产物组分的影响.结果表明,催化效果随催化剂添加比例的提高显著增加.在反应温度为350℃,反应时间1 h,金属氧化物添加比例为100∶1的条件下,碱土金属氧化物CaO及过渡金属氧化物中的α-Fe_2O_3和Ni_2O_3降解活性较好,这3种氧化物对HCB的降解率分别达到65.5%、100.0%和100.0%,脱氯率D_1分别为54.4%、81.9%和77.5%.HCB降解有机产物分析结果显示,8种金属氧化物与HCB样品反应产物中均存在低氯代苯,在α-Fe_2O_3和Ni_2O_3的催化作用下有2~4氯代低氯苯检出,说明在降解过程中存在明显的逐级脱氯/加氢反应;与CaO反应后的产物中低氯代苯较少,经拉曼光谱定性分析,有无序碳的检出,说明除了脱氯/加氢还存在脱氯缩合反应.     

铝铁锡共聚物的合成及其特性研究

合成制备了铝铁锡共聚物,测定分析了其水解共聚合和熟化过程中的pH变化,并通过扫描电镜和混凝实验对共聚物的晶形貌像和絮凝作用进行了研究。结果表明：Sn^4 具有比Fe^3 ,Al^3 更强的水解活性,它有使共聚物的分子趋于均一的作用;铝铁锡共聚物的最佳配比为：NAl∶NFe∶NSn=5∶5∶3,最佳水解度B^*＝2．0,此共聚物具有比CPAFC更优良的絮凝性能。     

有机废气中VOC的回收方法

介绍了炭吸附法、冷凝法和膜分离法回胥机废报中ＶＯＤ的原理、工艺流程和工业应用情况，并对这些方法进行了比较，指出了适用范围。     

反渗透膜处理维生素C凝结水的最优工艺条件

针对维生素C生产工艺中产生的凝结水产量大、处理成本高、存储运输困难和营养物质含量偏低等问题,采用反渗透技术对VC凝结水进行处理。实验建立小试规模反渗透膜处理装置,采用无量纲化多元回归分析方法,分析了操作条件指标与渗透水评价指标两套指标体系之间的关系,定量评价了各个操作条件指标对渗透水评价指标的整体影响程度,并在此基础上研究了最佳操作条件的工艺参数。结果表明：建立的无量纲化多元回归分析方法切实有效,在正交实验设计水平范围内,压力、pH和回流比均是多目标系统的影响因子,操作条件指标对渗透水评价指标的整体影响程度大小顺序为：压力〉pH〉回流比〉温度,且各自影响程度所占比例分别为43．02％、29．01％、25．07％和2．89％。各个操作因子对多指标系统的影响是独立的。在只考虑系统收益而不考虑膜污染的情况下,最佳操作条件分别为：温度r=30．65,压力P=1．5MPa,回流比r=0．78,pH=7．475。     

DSD酸氧化缩合废水浓缩液回用试验研究

研究了DSD酸氧化缩合废水浓缩液回用到原生产过程的可行性。对DSD酸氧化缩合废水可采用萃取技术分离出其中97％的有机物，反萃产生的4－8倍的浓缩液返回到DSD酸生产中的氧化缩合单元后，可提高DNS酸的收率约7．43％，且不会明显影响产品的纯度，浓缩液8次循环磁用试验的结果表明，虽然DSD酸氧化缩合废水的COD从15000－20000mg/L提高到20000－29000mg/L，但没有显著持续增长的趋势，表明反应液中副产物的浓度得到了有效的控制。     

Novel Polymeric Materials from Biological Oils

A variety of novel polymeric materials ranging from elastomers to tough, rigid plastics have been prepared by the cationic copolymerization of regular soybean oil, low-saturation soybean oil, or conjugated low-saturation soybean oil with various alkene commonomers. Using appropriate compositions and reaction conditions, 70–100% of the soybean oil is covalently incorporated into the cross-linked polymer networks, contributing significantly to cross-linking during copolymerization. The resulting thermosets exhibit thermophysical and mechanical properties that are competitive with those of their petroleum-based counterparts. In addition, good damping and shape memory properties have been obtained by controlling the degree of cross-linking and the rigidity of the polymer backbone. New materials with similar characteristics have also been produced from other biological oils, including tung, and fish oils using the same technique. The new, more valuable properties of these bioplastics suggest numerous promising applications of these novel polymeric materials.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.