深圳市秋季大气臭氧立体分布特征

利用大气O₃探测激光雷达在深圳市东部生态区和西部城区同步开展垂直观测,探究了2018年深圳市O₃立体分布在秋季光化学污染活跃期至冬季非活跃期的演变过程.结果表明：光化学反应活跃的10月,东部地面O₃浓度相对于西部地面高出约128%;地面向上至450m,O₃浓度在东部生态区发生快速降低,而在西部城区由于存在“滴定效应”,O₃浓度随高度升高而升高;450m~2km,东、西部O₃浓度均随高度升高而降低,西部城区O₃浓度水平超过东部生态区约30%;2km以上高空,东、西部O₃浓度趋同（70μg/m³）,并保持稳定,为具深圳市秋季O₃污染过程提供了较高的大气背景浓度.高污染期间,深圳市大气边界层内O₃浓度变化较为一致,西部高空的O₃区域传输作用更加显著.秋季至冬季光化学反应逐渐减弱,深圳市O₃浓度的水平和垂直空间差异逐渐减小,冬季的深圳市O₃污染基本受大气背景控制.     

基于网格空间数据的晋陕蒙接壤区生态环境综合评价

晋陕蒙接壤区是典型的生态过渡带、生态脆弱带。文章在调查研究的基础上 ,选取了 1 3个评价指标 ,应用层次分析法确定其权重 ,并将各个因子分级标准化和定量赋值 ,再用加权求和法得到每个评价单元的环境质量综合评价指数。根据环境综合评价指数将环境质量分为较好 (≥ 8)、一般 (≥ 6～ <8)、较差 (≥ 4～ <6)、恶劣 (<4) 4级。结果表明 :晋陕蒙接壤区的环境质量大多处于较差等级 ,较好、一般、较差、恶劣等级的面积比例分别为 2 .2 % ,2 8% ,5 7.4%和1 2 .4%     

对熏烟扩散模式应用的探讨

工程上应用的大气污染物扩散模式中 ,熏烟模式由于其非定常性而与其他扩散模式有很大的区别。正确处理模式中各参数及变量的相互关系才能客观地反映污染物对环境影响的结果。本研究通过对熏烟模式的非定常性和各参数、变量相互关系的分析 ,提出了正确使用该模式的方法     

兰州西固地区光化学烟雾污染气质模式

以兰州西固地区为研究对象,建立了描述该地区光化学烟雾污染的大气质量模拟模式——柱子模式。将该模式与实测数据进行了比较,结果表明,该模式基本上能够定量地描述当地所发生的光化学烟雾污染的主要污染物的时空分布及形成过程,可为污染评价、预测及污染治理提供依据。     

Waste minimization and its ecological evaluation A case study in printed circuit board manufacture

The printed circuit board (PCB) manufacturers face several problems regarding the waste they generate. In Austria, a detailed study for waste minimization was carried out with three PCB manufacturers and one electroplating company. In this project a lot of ecologically and economically effective options were found and implemented. The ecological evaluation of processes is still an unsolved problem. Several evaluation models are tested on selected processes of the project.     

以绿化三维量分析植物群降解SO2的宏观效应

控制和降低城市上空ＳＯ２的环境浓度对于改善城市环境，促进城市生态的良性循环具有十分重要的意义。本文从上海市绿化三维量分布模型、与ＳＯ２浓度分布模型的相关分析入手，以季节变化作为对比因子，讨论了城市绿化植物群的数量及分布对城市上空ＳＯ２浓度分布的宏观影响；并据此提出了可有效地控制城市上空ＳＯ２浓度的绿地建设的基本原则。     

The study for polyaromatic hydrocarbons decay on Chinese coal soot particles in atmosphere

A study for the photochemical behavior of some polyaromatic hydrocarbons (PAH), for example B(a )P, B( k )F and fluoranthene in coal smoke particles was performed by using indoor Teflon smog chamber.Experiments suggest that the photochemical reaction of PAH is first order reaction and kinetic rates of some PAH were obtained. It was shown that the reaction rate constant is proportional to light intensity and water vapor concentration. Temperature and PAH loading also have influence on PAH decay rate. A model for PAH loss has been set up on the basis of the results of our experiments and the simulating results of this model suggest that coal particle PAH half lives are of the order of a period of days in winter and a few hours in summer. Other factors which may have effect on the photochemical reaction of PAH have also been discussed.     

Pulse cleaning flow models and numerical computation of candle ceramic filters

ＩｎｔｒｏｄｕｃｔｉｏｎＣｌｅａｎｉｎｇｔｈｅｆｉｎｅｐａｒｔｉｃｌｅｓｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅ (450℃ -950℃ )ａｎｄｈｉｇｈｐｒｅｓｓｕｒｅｃｏｎｄｉｔｉｏｎｃａｎｅｎｈａｎｃｅｔｈｅｔｈｅｒｍａｌｅｆｆｉｃｉｅｎｃｙｏｆｃｌｅａｎｃｏａｌｔｅｃｈｎｏｌｏｇｉｅｓｓｕｃｈａｓＩＧＣＣｏｒＰＦＢＣ .Ｒｉｇｉｄｃｅｒａｍｉｃｆｉｌｔｅｒｓｏｆａｖａｒｉｅｔｙｏｆｓｔｒｕｃｔｕｒｅｓａｒｅｕｎｄｅｒｄｅｖｅｌｏｐｍｅｎｔｉｎｐｒｏｇｒａｍｓａｒｏｕｎｄｔｈｅｗｏｒｌｄ ,ｗｈｉｃｈｃａｎｆｉ…