Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Miscibility and Biodegradability of Poly(Butylene Succinate)/Poly(Butylene Terephthalate) Blends

As one of the biodegradable polymers, the blend of poly(butylene succinate) and poly(butylene terephthalate) is dealt with in this study. In our previous work, it was demonstrated that PBS and PBT are immiscible not only from the changes of T _g but also from logG–log G plots. It is expected that the biodegradability of the blends could be improved by enhancing the miscibility. We tried to induce the transesterification reaction between two polyesters with various time intervals to enhance the miscibility of the blends. The extent of transesterification reaction was examined by ¹H-NMR. We utilized a dynamic mechanical thermal analyzer and a rotational rheometer to investigate the changes in miscibility. We also verified the biodegradability of PBS/PBT blends after the transesterification reaction by the composting method.     

Processing and Characterization of Short-Fiber Reinforced Jute/Poly Butylene Succinate Biodegradable Composites: The Effect of Weld-Line

Fabrication of complex injection molded parts often involves the use of multiple gates. In such situations, polymer melts from different gates meld to form the molded part (weld line). This paper reports on the fabrication and characterization of the mechanical and morphological properties of short fiber reinforced jute/poly butylene succinate (PBS) biodegradable composites. The effect of a dual gated mold in the fabrication of welded specimens was a key focus of the investigation. It was observed that incorporation of jute fiber (10 wt%) conferred drastic changes on the stress–strain properties of the matrix as the elongation at break (EB), dropped from 160% in the matrix to just 10% in the composite. The tensile strength of the composite was lower than that of the matrix. However, it is noteworthy that the tensile modulus of the composite increased. Bending test also revealed that both bending strength and modulus increased with the incorporation of jute. Morphological studies of the tensile fracture surface using SEM revealed two types of failure mode. Ductile failure was indicated by plastic deformation at the initiation of fracture followed by brittle failure. The good interfacial bonding indicated between jute and PBS was attributed to positive interaction between the two polar polymers. A comparison of the non-weld and weld-line samples revealed that the weld-line composites have better mechanical integrity than the corresponding polymer matrix with weld line. The results also revealed that elongation at break and toughness are most sensitive to the presence of the weld-line whereas flexural properties are least sensitive.     

聚丁二酸丁二醇酯（PBS）生物降解过程对植物生长的影响评价

通过苏丹草（Sorghum sudanense Stapf）、籽粒笕（Amaranthus hypochondriacus L.）、豇豆（Vigna sesquipedalis Wight）种子的发芽试验及其盆栽试验,考察了PBS在土壤浸提液中的生物降解性能,探讨了PBS高聚物、低聚物和合成单体对植物的发芽和生长影响。研究结果表明：①在土壤浸提液中微生物对PBS有一定的降解作用,且在降解过程中,降解液的pH变化不明显;②PBS高聚物的降解产物对植物生长没有影响;③P BS低聚物在降解初期抑制部分植物的幼苗生长,后期对植物的生长没有影响;④当丁二酸的质量浓度低于200 mg.L^-1时,对植物种子的发芽和幼苗生长不会产生影响,当质量浓度高于500 mg.L^-1时,将抑制幼苗生长;当1,4-丁二醇的质量浓度低于2 000 mg.L-1时,对种子的发芽和生长没有影响。     

聚环氧琥珀酸钠阻碳酸钙垢性能研究

研究了聚环氧琥珀酸钠在不同因素下的阻碳酸钙性能。实验结果表明 ,聚环氧琥珀酸钠具有较高的阻垢性能和较好的热稳定性 ,在高钙离子浓度、高温水系统中长时间停留对碳酸钙仍有较强的抑制作用。     

Fungicidal activity and molecular modeling of fusarubin analogues from Fusarium oxysporum

Abstract

Fusarubin analogues of Fusarium oxysporum f. sp. ciceris were investigated for antifungal activity in vitro against five soil borne phytopathogenic fungi. 3-O-Methyl-8-O-methyl-fusarubin was inhibitory towards S. sclerotiorum (EC₅₀ 0.33?mmol L^?1) and Sclerotium rolfsii (EC₅₀ 0.38?mmol L^?1). A structure–antifungal activity relationship of fusarubin analogues was established from their activity performance. Possible mechanism of action of these compounds was studied using molecular docking and simulations against three target enzymes which revealed receptor ligand binding affinity. Docking of 3-O-methyl-8-O-methyl-fusarubin into the succinate dehydrogenase site revealed formation of salt bridge, hydrogen bond, π–anion, π–alkyl, and Van der Waals interactions.     

丁二酸钠对氯化钙和水玻璃溶液的渗透性影响

采用正向渗透试验方法测定了氯化钙和水玻璃溶液添加丁二酸钠后溶液在粉尘介质中的渗透规律。该研究结果可有效利用氯化钙和水玻璃进行固土抑尘。     

Morphological Study on Hydrolytic Degradation of Poly(tetramethylene succinate) Single Crystals and Spherulites

The morphological changes of Poly(tetramethylene succinate) single crystal lamellae by hydrolysis are investigated, using TEM, WAXD and SAXS. And the morphology of PTMS spherulites was also observed by optical microscopy after treatments as well as single crystal lamellae. The edge region of single crystal lamella can be most easily affected in the initial stage of hydrolysis. As the hydrolysis time increases, the lamellae are separated into small fragments which may be started from the uneven or irregular parts of the surface. The WAXD results showed that crystallinity were increased with increasing of treatment time. The lamellar thickness decreased at the initial stage of hydrolysis and increased again. There were cracks on the surface of spherulites after hydrolysis and the direction of cracks were tangential direction of spherulites. This result was thought to be from the uniformity of molecular arrangement in the crystallographic unit cell.     

2种BDPs固相反硝化的脱氮效果对比

利用批量和连续流填充床试验对比了2种BDPs(可生物降解聚合物)——PBS(聚丁二酸丁二醇酯)和PCL(聚ε-己内酯)的反硝化效果. 批量试验结果表明,在脱氮稳定阶段,B1(PCL)和B2(PBS)对TN的平均去除率和反硝化速率分别为97.4%、67.0%和7.5、1.8 mg/(L·h),B2均明显优于B1. 连续流试验中,在进水ρ(NO₃--N)为16.8～18.8 mg/L、HRT(水力停留时间)为4.0 h的条件下,L1(PCL填充床)的反硝化速率大于L2(PBS填充床). 但是随着HRT的减小,L1呈现出比L2更快的反硝化速率. L2和L1分别在HRT为2.0和1.5 h时获得最大反硝化速率,分别为7.7和9.3 mg/(L·h). ESEM(环境扫描电子显微镜)观察结果表明,生物膜剥离后,PCL和PBS颗粒表面均出现大量的坑洞,并且PCL颗粒表面坑洞的密集程度远大于PBS. 三维荧光光谱(3D-EEM)分析结果表明,L2和L1出水中的溶解性有机物主要为类色氨酸这类简单的蛋白质和SMP(溶解性微生物代谢产物),并且L1水中SMP的荧光峰强度明显高于L2.      

Effect of Poly(l-Lactide) and Poly(Butylene Succinate) on the Growth of Red Pepper and Tomato

Seeds of red pepper and tomato were sowed and cultivated in a soil blended with powdery poly(l-lactide) (PLLA), and poly(butylene succinate) (PBS). PBS depressed the growth of the two plants significantly even at a concentration as low as 5%, whereas PLLA up to 35% affected negligibly or even boosted the growth of the two plants. pH and number of microbial cells in the soil after 80 days of cultivation were almost the same independently whether the soil was blended with the two polymers or not. In contrast, the molecular weight of PBS decreased much faster than that of PLLA. Because succinic acid and 1,4-butane diol, from which PBS was synthesized, exhibited toxicity to both plant and animal cells to retard the germination rate of young radish seeds and to deform the morphology of HeLa cells significantly [1], the monomers and the oligomers produced from the PBS degradation should have a detrimental influence on the growth of the two plants.