Effects of calcination temperature on physicochemical property and activity of CuSO4/TiO2 ammonia-selective catalytic reduction catalysts

CuSO_4/TiO_2 catalysts with high catalytic activity and excellent resistant to SO_2 and H_2 O,were thought to be promising catalysts used in Selective catalytic reduction of nitrogen oxides by NH_3.The performance of catalysts is largely affected by calcination temperature.Here,effects of calcination temperature on physicochemical property and catalytic activity of CuSO_4/TiO_2 catalysts were investigated in depth.Catalyst samples calcined at different temperatures were prepared first and then physicochemical properties of the catalyst were characterized by N2 adsorption-desorption,X-ray diffraction,thermogravimetric analysis,Raman spectra,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,temperature-pro grammed desorption of NH_3,temperature-programmed reduction of H_2 and in situ diffuse reflectance infrared Fourier transform spectroscopy.Results revealed that high calcination temperature had three main effects on the catalyst.First,sintering and anatase transform into rutile with increase of calcination temperature,causing a decrement of specific surface area.Second,decomposition of CuSO_4 under higher calcination temperature,resulting in disappears of Br(?)nsted acid sites(S-OH),which had an adverse effect on surface acidity.Third,CuO from the decomposition of CuSO_4 changed surface reducibility of the catalyst and favored the process of NH_3 oxidation to nitrogen oxides(NO_x).Thus,catalytic activity of the catalyst calcined under high temperatures(≥600℃) decreased largely.     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment

The utilization of waste products as valuable materials was a technical imperative for waste management. In this study, the cost-effective attapulgite/carbon(APT/C) composite was developed for wastewater treatment using waste hot-pot oil as a carbon precursor through a facile one-step calcination process. The APT/C composite prepared at 300°C exhibited the excellent adsorption capacity and rapid equilibrium rate over a broad p H range for the removal of various pollutants. More importantly, the removal ratios of the composites toward Methyl Violet and tetracycline still remained 77.6% and 60.2% of the initial adsorption capacity after ten adsorption–regeneration cycles via a facile thermal regeneration strategy, respectively.Beyond all doubt, this research provided a feasible and economical way for the sustainable utilization of waste hot-pot oil in wastewater treatment, achieving the concept of disposal waste with waste and recycling.     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.     

含汞固废(危废)焙烧过程汞的迁移及治理技术研究

本文通过试验,阐明了舍汞固废（危废）焙烧过程中汞的迁移情况,并得到了焙烧治理技术的最佳工艺参数为：焙烧温度600℃、焙烧时间5h、炉内压力-50Pa—100Pa;焙烧后固废中残留汞含量小于0．0015％;汞回收率达95％左右。     

Removal of elemental mercury by photocatalytic oxidation over La2O3/Bi2O3 composite

La₂O₃/Bi₂O₃ photocatalysts were prepared by impregnation of Bi₂O₃ with an aqueous solution of lanthanum precursor followed by calcination at different temperatures. The composite materials were used for the first time for the photocatalytic removal of Hg⁰ from a simulated flue gas under UV light irradiation. The results showed that the sample containing 6 wt.% La₂O₃ and calcined at 500°C has the highest dispersion of the active sites, which was promoted by the strong interaction with the support (i.e., the formation of Bi-O-La species). Since they are fully accessible on the surface, the material also exhibits excellent optical properties while the heterojunction formed in La₂O₃/Bi₂O₃ promotes the separation and migration of photoelectron-hole pairs and thus Hg⁰ oxidation efficiency is enhanced. The effects of the various factors (e.g., the reaction temperature and composition of the simulated flue gas (i.e., O₂, NO, H₂O, and SO₂)) on the efficiency of the Hg⁰ photocatalytic oxidation were investigated. The results demonstrated that O₂ and SO₂ enhanced the efficiency of the reaction while the reaction temperature, NO, and H₂O had an inhibitory effect.     

Photocatalytic activity of the calcined H-titanate nanowires for photocatalytic oxidation of acetone in air

Hydrogen titanate (H-titanate) nanowires were prepared via a hydrothermal reaction of TiO₂ powders (P25) in KOH solutions and then calcined at various temperatures. The phase structure, crystallite size, morphology, specific surface area, and pore structures of the calcined H-titanate nanowires at various temperatures were characterized with field emission scanning electron microscope, X-ray diffraction, transmission electron microscopy and nitrogen adsorption–desorption isotherms, and their photocatalytic activities were evaluated by photocatalytic oxidation of acetone in air. With increasing calcination temperature, the specific surface area and porosity of the calcined samples steadily decreased. At a calcination temperature range of 400–600 °C, the calcined H-titanate nanowires showed higher photocatalytic activity than P25 powders for photocatalytic oxidation of acetone. Especially, at 500 °C, the calcined H-titanate nanowires showed the highest photocatalytic activity, which exceeded that of P25 by a factor of about 1.8 times. This can be attributed to the synergetic effect of larger specific surface area, higher pore volume and the presence of brookite TiO₂. With further increase in the calcination temperature (700–900 °C), the photocatalytic activity of the samples decreased obviously owing to the growth of TiO₂ crystallites.     

氢氧化铌对水溶液中磷酸根的吸附特性研究

以氢氟酸法制备的氢氧化铌作为磷酸根的吸附剂,考察了氢氧化铌用量及焙烧温度对吸附效果的影响。在25℃,磷酸根初始浓度为50mg/L、体积200mL的条件下,确定吸附剂的最佳用量为0.1g,此时氢氧化铌原样对磷酸根的最大吸附量为48.2mg/g。上述条件下,经200、300、400、500℃焙烧后的氢氧化铌对磷酸根的最大吸附量依次为25.9、15.6、11.6、7.5mg/g。分析表明,随着焙烧温度的升高,表面羟基逐渐减少,氢氧化铌对磷酸根的吸附能力逐渐降低。在吸附过程中,焙烧前后的氢氧化铌对磷酸根吸附速率均较快(20min达到吸附平衡)。