武器装备电磁兼容性预测试技术初探

阐述了电磁兼容性(EMC)和电磁兼容测量的基本概念,通过分析EMC认证测试与EMC预测试的特点,总结了EMC预测试的优点.EMC预测试分为指标性预测试和故障诊断预测试.以一些EMC测试项为例,详细描述了这两种预测试的测试方法,最后简述了对电磁兼容性设计的整改措施.     

长三角典型村域次降雨条件下氮素非点源输出特征

研究长三角典型都市农业村镇不同土地利用下的氮素非点源输出特征,以期为治理该区域的面源污染提供科学依据.通过典型次降雨径流事件中氮形态和输出负荷变化的研究发现:监测点总氮(TN)的事件平均浓度(EMC)为20.01～22.83mg/L,其中溶解态氮(DN)占TN的比例最大;研究区非点源氮流失以溶解态为主,DN又以溶解态有机氮(DON)为主.耦合各形态氮浓度与径流量特征,发现非点源氮素输出呈现2个峰值,且出现在径流峰值之前4～55min;TN、DN和硝态氮(NO3--N)浓度随降雨时间增加呈现减少趋势;氮素负荷受其浓度和径流量的共同作用,基本上呈现与氮素浓度相同的变化特征,但起伏变化较为平缓.氮素污染负荷积累曲线分析表明,村域地表径流各形态氮素均存在初期冲刷效应.     

Estimation of Land Use Specific Runoff and Pollutant Concentration for Tapi River Basin in India

Non-point source (NPS) pollution is the result of various land use practices such as agriculture, sites of construction and waste disposal, urban development and so on. The control of NPS pollution is possible by regular monitoring and assessment on watershed basis to educate people for implementing well-known structural and non-structural measures. Recent trend is to use GIS based modelling tool for assessment of rainfall-runoff and non-point loading. The approach requires generation and analysis of basin wide data on various features of land and estimates of Event Mean Concentrations (EMCs) of pollutants in the runoff. In the present paper, basin wide data in different districts of Tapi basin has been analysed for land use distribution; fertilizer application; low, medium and high-density habitation; and annual rainfall. Coefficients of runoff have been estimated considering pervious and impervious area for different land use types, and compared with the reported values for Indian conditions. The estimated mean annual runoff flow indicated that two districts Jalgaon and Dhule contribute maximum runoff to the Tapi River. Estimates of EMCs for BOD and nutrients (N and P) in the runoff from various districts are useful in GIS-based modelling study for NPS pollution assessment.     

GB4706．2-2007电熨斗新国际非正常测试

本文针对2009年1月1日即将实施的GB4706．2—2007熨斗国家标准,分析了某智能控制电熨斗电路原理,介绍第19章非正常测试,讨论判定条款,常规CE中的EMC与19.11.14条EMC项目的差异。     

一种基于预测法的电磁兼容设计方法

文章以数模混合电路设计实践为基础,介绍了一种基于预测法的电磁兼容设计方法。先以电磁兼容测试理论为基础介绍数模混合电路设计中的电磁兼容方法,在以此方法建立电磁兼容设计模型,并通数模混合电路实践来检验和改进设计模型。     

电器防雷滤波技术探讨

我国是雷电多发地区,在我们日常生活中电器经常会被雷电击坏或不能正常工作。本文就产品设计中我们常采用的一种既防雷又解决滤波的防雷滤波技术讨论,并加以验证。     

血压监护系统的电路分析和印刷电路板设计

本文介绍了血压监护系统的电路设计,其中前端电路的设计采用差分多级放大电路,达到放大的效果。应用PSpice软件对滤波电路进行了仿真,得到了带通滤波器的通带频率,验证了滤波器设计的可行性。同时本文对血压监护系统印刷电路板中电磁兼容问题进行了研究,对血压监护系统电路板的布局布线规则进行了规划和设计。     

射频识别(RFID)系统中的电磁兼容问题分析

随着RFID技术在各个领域的广泛应用,其面临的电磁兼容问题逐渐显现出来。对RFID中电磁兼容问题的分析是解决RFID中电磁兼容问题的前提。论文首先总结出了RFID系统内部存在的主要电磁兼容问题,然后分析了RFID在应用中产生的辐射问题及它与其他系统之间的相互干扰问题,最后归纳总结出了目前对RFID中电磁兼容问题进行研究的方法,及解决RFID中电磁兼容问题的具体措施。     

某运载火箭舱内无线系统电磁兼容性仿真分析方法与应用

为保证某运载火箭与卫星星箭分离面处的电磁兼容性设计,在火箭无线系统研制阶段,应用电磁仿真预测分析方法,构建火箭箭体及无线系统电磁仿真模型,搭建火箭系统电磁仿真平台,计算星箭分离面处的电磁辐射特性,分析潜在电磁干扰危害。在预测分析基础上,结合火箭、卫星总装状态下的星箭分离面处电磁兼容性测试,验证仿真预测分析方法的有效性。这种电磁仿真预测分析、试验验证相结合的方法,为在火箭设计全流程的电磁兼容设计提供支撑,同时实现了火箭研制与试验验证的闭环设计。     

BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.