Nonideal transport of contaminants in heterogeneous porous media: 10. Impact of co-solutes on sorption by porous media with low organic-carbon contents

The impact of co-solutes on sorption of tetrachloroethene (PCE) by two porous media with low organic-carbon contents was examined by conducting batch experiments. The two media (Borden and Eustis) have similar physical properties, but significantly different organic-carbon (OC) contents. Sorption of PCE was nonlinear for both media, and well-described by the Freundlich equation. For the Borden aquifer material (OC = 0.03%), the isotherms measured with a suite of co-solutes present (1,2-dichlorobenzene, bromoform, carbon tetrachloride, and hexachloroethane) were identical to the isotherms measured for PCE alone. These results indicate that there was no measurable impact of the co-solutes on PCE sorption for this system. In contrast to the Borden results, there was a measurable reduction in sorption of PCE by the Eustis soil (OC = 0.38%) in the presence of the co-solutes. The organic-carbon fractions of both media contain hard-carbon components, which have been associated with the manifestation of nonideal sorption phenomena. The disparity in results observed for the two media may relate to relative differences in the magnitude and geochemical nature of these hard-carbon components.     

The prenatal diagnosis of the Walker-Warburg Syndrome

On the basis of physical features and autopsy findings, a child with congenital hydrocephalus, bilateral microphthalmia, myopathy, severe developmental retardation and multiple brain malformations was diagnosed to have the Walker-Warburg Syndrome (WWS). During a subsequent pregnancy in this family, a fetus at risk for this autosomal recessive condition was evaluated with serial ultrasound examinations. At 15 weeks of gestation an encephalo-cele was noted. Disproportionately slow growth of the head compared to the body was noted at 36 weeks. At birth, the diagnosis of WWS was confirmed in the child due to the presence of microcephaly, an encephalocele, a meningocele and bilateral microphthalmia. This is the first reported case of the early prenatal diagnosis of this recently categorized genetic condition, in which the major features are hydrocephalus, multiple central nervous system malformations, microphthalmia with ocular malformations, severe psychomotor retardation, congenital myopathy and a very limited life expectancy.     

Application of nanoparticle tracking analysis for characterising the fate of engineered nanoparticles in sediment-water systems

Novel applications of nanotechnology may lead to the release of engineered nanoparticles (ENPs), which result in concerns over their potential environmental hazardous impact. It is essential for the research workers to be able to quantitatively characterise ENPs in the environment and subsequently to assist the risk assessment of the ENPs. This study hence explored the application of nanoparticle tracking system (NTA) to quantitatively describe the behaviour of the ENPs in natural sediment-water systems. The NTA allows the measurement of both particle number concentration (PNC) and particle size distribution (PSD) of the ENPs. The developed NTA method was applied to a range of gold and magnetite ENPs with a selection of surface properties. The results showed that the positively-charged ENPs interacted more strongly with the sediment than neutral and negatively-charged ENPs. It was also found that the citrate coated Au ENPs had a higher distribution percentage (53%) than 11-mercaptoundecanoic acid coated Au ENPs (20%) and citrate coated magnetite ENPs (21%). The principles of the electrostatic interactions between hard (and soft) acids and bases (HSAB) are used to explain such behaviours; the hard base coating (i.e. citrate ions) will interact more strongly with hard acid (i.e. magnetite) than soft acid (i.e. gold). The results indicate that NTA is a complementary method to existing approaches to characterise the fate and behaviour of ENPs in natural sediment.     

硬铝合金薄壁杯形件成形工艺与模具

此文介绍了硬铝合金薄壁杯形件成形工艺与模具设计的方法,分析了硬铝合金塑性差给冷挤压成形带来了困难的特点,从成形工艺、模具设计等方面采取了有效措施,从而较好地解决了硬铝合金在成形过程中产生的缺陷.此文也为类似零件艺及模具设计提供了参考.     

TWIN: a TWo-stage INdex to evaluate ecological quality status in lagoon environments by means of hard bottom zoobenthos

The macrobenthos colonizing the artificial hard bottoms in lagoons has been used in biomonitoring programs as it requires easy sampling procedures and provides a variety of responses to different environmental pressures, like marine or continental influence, eutrophication, and urban pollution. In this paper we present the development and application of a new TWo-stage INdex (TWIN), aimed to assess water quality of lagoon environments using the hard bottom macrobenthos community. TWIN is calculated in two separate stages. First, the presence and abundance of macrobenthic species are used to define, through a fuzzy model, a station's membership grade in six pre-defined ecological sectors (Lagoon Mouth, Vivified Lagoon, Rough Eutrophic, Calm Eutrophic, Urban, Estuarine), each corresponding to characteristic communities. Then a formula links the membership grades to the five ecological status classes ranging from high to bad quality, as requested by the European Water Framework Directive. This method was tested in four Adriatic lagoons: the results are consistent with literature information and expert judgement, therefore we propose its use in the definition of water quality in lagoons.     

Study on difference of outburst elimination effect between sub-layers of soft coal and hard coal under the condition of gas per-drainage

The effect of drainage and outburst elimination are obviously different between soft and hard coal sub-layers under per-drainage of coal seam, and hence, the location of per-drainage borehole related to the soft sub-layer is the key that determines whether the outburst can be eliminated in whole coal seam. This paper discusses the differences between soft and hard coal from fields of pore radius distribution, pore structure, surface area and permeability, and the per-drainage effect was numerical simulated under different distance between per-drainage hole and soft sub-layer. Moreover, the optimum hole arrangement of outburst elimination is given in the paper. The result of research shows that the macro-pore with aperture that is larger than 50,000 nm, is dominant at about 50% in hard coal, correspondingly, the micro-pore with aperture less than 100 nm accounts for about 41.23% in soft coal. The surface area of soft coal is 1.6 times as that of hard coal. The residual gas content in soft coal sub-layer is obviously more than it in hard coal sub-layer under the same pre-drainage condition. To 5.5 m-thick coal seams which top is a soft coal sub-layer of 0.5 m-thick, pre-drainage gas can eliminate danger of gas outburst in whole coal seam at the seam time after 455 days drainage when the per-drainage holes are 1.0 m distances from the soft coal sub-layer.     

Laser tempering based turning process for efficient machining of hardened AISI 52100 steel

Cost-effective machining of hardened steel components such as a large wind turbine bearing has traditionally posed a significant challenge. This paper presents an approach to machine hardened steel parts efficiently at higher material removal rates and lower tooling cost. The approach involves a two-step process consisting of laser tempering of the hardened workpiece surface followed by conventional machining at higher material removal rates with lower cost ceramic tools to efficiently remove the tempered material. The laser scanning parameters that yield the highest depth of tempered layer are obtained from a kinetic phase change model. Machining experiments are performed to demonstrate the possibility of higher material removal rates and improved tool wear behavior compared to the conventional hard turning process. Tool wear performance, cutting forces, and surface finish of Cubic Boron Nitride (CBN) tools as well as low cost ceramic tools are compared in machining of hardened AISI 52100 steel (~63 HRC). In addition, cutting forces and surface finish are compared for the laser tempering based turning and conventional hard turning processes. Experimental results show the potential benefits of the laser tempering based turning process over the conventional hard turning process.     

Pre- and post-beach response to engineering hard structures using Landsat time-series at the northwestern part of the Nile delta,Egypt

Analyses have been undertaken to examine shoreline positions established from remote sensing data along the northwestern part of the Nile delta from the Abu Qir Bay to Gamasa embayment (∼143 km length). The image data used (MSS, TM and ETM+ sensors) are acquired at unequal intervals between 1972 and 2006, i.e., covering a time span of 34 years. Automated waterline positions extracted from Landsat satellite images during this period of time were computer generated. A digital shoreline analysis software was used to calculate the annual rate of beach changes at 1,432 cross-shore transects prior to (1972–1990) and after protection (1993–2006). On comparison, rates estimated from three statistical approaches (the end point rate, the Jackknife and a weighted linear regression) at corresponding positions are successfully validated with those measured from ground survey. Before protection, results reveal longshore patterns wherein erosion along a coastal stretch gives way to accretion in an adjacent stretch, refining the sub-cells previously identified within the littoral system of the delta. Maximum shoreline retreat occurs along the Rosetta promontory (−138.52 m/year) and along the central bulge of the delta at Burullus headland (−6.07 m/year). In contrast areas of shoreline accretion exist within saddles or embayments between the promontories at west Abu Qir Bay (20.04 m/year), Abu Khashaba saddle (16.17 m/year) and Gamasa embayment (20.68 m/year). These rates of changes have been significantly altered by the construction of intensive shoreline protective structures built from 1990 to combat areas of rapid erosion at both the Rosetta promontory and Burullus–Baltim headland, ∼15-km length in total.     

Large-scale modeling of reactive solute transport in fracture zones of granitic bedrocks

Final disposal of high-level radioactive waste in deep repositories located in fractured granite formations is being considered by several countries. The assessment of the safety of such repositories requires using numerical models of groundwater flow, solute transport and chemical processes. These models are being developed from data and knowledge gained from in situ experiments such as the Redox Zone Experiment carried out at the underground laboratory of Äspö in Sweden. This experiment aimed at evaluating the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Most chemical species showed dilution trends except for bicarbonate and sulphate which unexpectedly increased with time. Molinero and Samper [Molinero, J. and Samper, J. Groundwater flow and solute transport in fracture zones: an improved model for a large-scale field experiment at Äspö (Sweden). J. Hydraul. Res., 42, Extra Issue, 157–172] presented a two-dimensional water flow and solute transport finite element model which reproduced measured drawdowns and dilution curves of conservative species. Here we extend their model by using a reactive transport which accounts for aqueous complexation, acid–base, redox processes, dissolution–precipitation of calcite, quartz, hematite and pyrite, and cation exchange between Na⁺ and Ca²⁺. The model provides field-scale estimates of cation exchange capacity of the fracture zone and redox potential of groundwater recharge. It serves also to identify the mineral phases controlling the solubility of iron. In addition, the model is useful to test the relevance of several geochemical processes. Model results rule out calcite dissolution as the process causing the increase in bicarbonate concentration and reject the following possible sources of sulphate: (1) pyrite dissolution, (2) leaching of alkaline sulphate-rich waters from a nearby rock landfill and (3) dissolution of iron monosulphides contained in Baltic seafloor sediments. Based on these results, microbially mediated processes are postulated as the most likely hypothesis to explain the measured increase of dissolved bicarbonates and sulphates after tunnel construction.     

The use of hard- and soft-modelling to predict radiostrontium solid-liquid distribution coefficients in soils

The solid-liquid distribution coefficient (K_d) is the parameter that governs the incorporation of contaminants in soils. Its estimation allows the prediction of the fate of contaminants in the short- and long-term after a contamination event. Here, the K_d of radiostrontium (K_d(Sr)), a radionuclide of significant environmental interest, was predicted by hard models, which are based on knowledge of the mechanisms governing its sorption, and by soft models based on Partial Least Squares (PLS), using a large data set with the main soil parameters. The two approaches were tested and compared for 30 soils in Spain. Correlations between the predicted and experimental values of K_d(Sr) obtained using hard- and soft-modelling showed slopes close to 1 and regression coefficients higher than 0.95, which confirms that both approaches are able to obtain satisfactory estimates for K_d(Sr) from soil parameters.