梯度淋洗快速分析水中多环芳香烃

根据流动相极性理论，采用梯度淋洗一检测器编程方法检测多环芳烃，大大缩短了分析时间，并提高了灵敏度和精密度．为进一步定量分析提供了优良的途径。     

The effect of catch crops on sulphate leaching and availability of S in the succeeding crop on sandy loam soil in Denmark

Sulphate leaching losses may reduce the long-term possibility of maintaining the S supply of crops in low input farming systems. The ability of catch crops (Italian ryegrass (Lolium multiflorum Lam), winter rape (Brassica napus L.) and fodder radish (Raphanus sativus L.)) to reduce soil sulphate concentrations in autumn and make it available to a succeeding crop was investigated in 1996–1998 on sandy loam soil in Denmark. All catch crops reduced soil sulphate concentrations in the autumn compared to bare soil. Especially, the cruciferous catch crops had the ability to deplete efficiently soil sulphate levels and thus, reduce the sulphate leaching potential. The S uptake in aboveground catch crop was 8, 22 and 36 kg S per ha for ryegrass, winter rape and fodder radish, respectively. In the following spring, sulphate levels of the autumn bare soil were low in the top 0.5 m and a peak of sulphate was found at 0.75–1 m depth. In contrast, where a fodder radish catch crop had been grown, high sulphate levels were present in the top 0.5 m, but only small amounts of sulphate were found at 0.5–1.5 m depth. In spring barley (Hordeum vulgare L.), that followed catch crops, S concentrations at heading and maturity revealed that the availability of soil S increased following winter rape and fodder radish, whereas there were indications that following ryegrass, the S availability was reduced compared to bare soil. This initial study showed that catch crops have a high potential for reducing sulphate leaching and may be used to synchronise S availability with plant demand in a crop rotation.     

华南玄武岩红土化过程中微量元素地球化学

广东、海南的玄武岩．在强烈的红土化过程中．元素在红土剖面中发生迁移和残留、贫化和富集。根据红土化过程中元素的地球化学性状，将元素划分为活泼元素和不活泼元素两大类。并首次采用了元素它集因子这个概念来探讨红土化过程中微量元素的地球化学行为。最后讨论了红土化过程小金的表生富集作用。     

Assessing the impact of pesticides on the environment

Pesticide use in agriculture can cause undesirable effects on humans and the natural environment. One of the objectives of integrated agriculture is the elimination or reduction of possible sources of environmental pollution such as pesticides. To achieve this objective, farmers need a method to assist them in estimating the environmental impact of pesticide use. This paper addresses a two-part question: what factors should be taken into consideration to assess pesticide environmental impact, and how can impact be quantified? As the environmental impact of a pesticide depends on its dispersion in the environment and on its toxicological properties, the literature on these topics is reviewed to address the first part of the question. To address the second part of the question, six recent approaches to assess the impact of pesticides on the environment are compared regarding choice, transformation and aggregation of input parameters. The use of simulation models to assess environmental impact is discussed.     

Simulating dairy liquid waste management options as a nitrogen source for crops

Large scale dairy operations are common. In many cases the manure is deposited on a paved surface and then removed with a flushing system, after which the solids are separated, the liquid stored in ponds, and eventually the liquid applied on adjacent crop land. Management of liquid manure to maximize the fertilizer value and minimize water quality degradation requires knowledge of the interactive effects of mineralization of organic N (ON) to NH₄⁺, crop uptake of mineral N, and leaching of NO₃⁻ on a temporal basis. The purpose of the research was to use the ENVIRO-GRO model to simulate how the amount of applied N, timing of N application, ON mineralization rates, chemical form of N applied, and irrigation uniformity affected (1) yields of corn (Zea mays) in summer and a forage grass in winter in a Mediterranean climate and (2) the amount of NO₃⁻ leached below the root zone. This management practice is typical for dairies in the San Joaquin Valley of California. The simulations were conducted for a 10-year period. Steady state conditions, whereby an equivalent amount of N applied in the organic form will be mineralized in a given year, are achieved more rapidly for materials with high mineralization rates. Both timing and total quantity of N application are important in affecting crop yield and potential N leaching. Major conclusions from the simulations are as follows. Frequent low applications are preferred to less frequent higher applications. Increasing the amount of N application increased both the crop yield and the amount of NO₃⁻ leached. Increasing irrigation uniformity increased crop yields but had variable effects on the amount of NO₃⁻ leached. A winter forage crop following a summer corn crop effectively reduced the leaching of residual soil N following the corn crop.     

柱撑粘土材料的环境化学行为

柱撑粘土是一种新型的复合材料，国内外近年来进行了广泛和深入的，本文系统评述了国内外柱撑粘土复合材料的环境化学行为，吸附重金属离子，吸附苯酚类物质，吸附磷类物质，吸附废水中的COD，大气污染等方面，揭示该种新材料在各种污水处理中具有广阔的应用前景。     

废干电池浸出的试验研究

以锌碳电池和碱性锌锰电池为实验对象，通过固体废物浸出毒性试验，探讨废电池在不同破坏程度、不同pH值和不同浸取级数条件下的浸出规律。试验发现，锌碳电池中Pb、Cd、zn、Mn浸出浓度相对较高，碱性锌锰电池中Cu、As、Hg浸出浓度较高。对于锌碳电池，中性浸取剂和酸性浸聚剂影响不大，而对于碱性锌锰电池，酸性浸取剂条件下浸浓度反而较低。锌碳电池和碱性锌锰电池都是在完全破坏条件下浸出浓度高。在实际中，电池外壳腐蚀是一个缓慢的过程。     

冶金污泥稳定化/固化处理工艺研究

冶金工业在生产过程中产生大量酸性废水.对这类废水目前通常采用石灰中和沉淀处理.文章中通过研究采用水泥和工业废渣作固化基材固化处理冶金工业酸性废水用石灰混凝所产生的含铜、砷的污泥,分析了影响固化块抗压强度的多种因素,采用固体废物浸出毒性浸出方法对浸出率进行实验探讨.     

The adaptive significance of male polymorphism in the acarid mite Caloglyphus berlesei

Summary Two forms of males occur in the acarid mite, Caloglyphus berlesei. One of them uses its thickened third pair of legs to kill other males; the other, without modified legs, does not attack other males. Previous studies have shown that the form of the male is environmentally determined: fighter males develop only at low population densities and their development can be suppressed by substances emanating from dense colonies. In this study, the duration of development, longevity and virility of the two male morphs were measured. The only significant difference was that fighters had a shorter development time between the two last moults. In another experiment, two groups of colonies were maintained under the same conditions but had different numbers of individuals: small colonies contained 2 fighters and 2 non-fighters, whereas large colonies contained 30 males of each type. The relative reproductive success of both morphs was estimated from numbers of matings. In small colonies, the estimated reproductive success (ERS) was significantly higher for fighters than for non-fighters, mainly because in over 50% of these colonies a single fighter male managed to kill all the rival males and monopolize the females. The opposite was true in large colonies, in which non-fighters achieved significantly higher ERS, mainly because the fighters were killed in fights more often than the non-fighters. This implies that the ratio of costs to benefits obtained by adopting the fighter-male strategy increases with the number of rival males, which may explain conditional male development in C. berlesei.     

Effectiveness of resistivity monitoring for interpreting temporal changes in landfill properties

It is always possible for impermeable layers to exist in landfills. When they do, the properties of the solution at the exit of the leachate-collection system might not accurately reflect the overall properties of the landfill. This study examines whether resistivity monitoring is effective for determining the influence of impermeable layers on the leachate. The test cell used in this study was filled with waste made up mainly of incinerator ash and shredded incombustible material. Three lines of resistivity sensors were laid in the uppermost layer of the fill. A resistivity profile was recorded periodically from each of these lines. The water-table level and leachate properties were measured concurrently. Leachate conductivity was mainly controlled by concentrations of the main ions, and it correlated inversely to variations in resistivity. Temporal changes in the resistivity of the fills are an excellent means of assessing the leaching in fills. Monitoring the properties of leachate, combined with resistivity profiling, is extremely useful for interpreting the temporal changes of properties in landfills containing impermeable layers.