Research on flow assurance of deepwater submarine natural gas pipelines: Hydrate prediction and prevention

The formation of hydrate will lead to serious flow assurance problems in deepwater submarine natural gas transmission pipelines. However, the accurate evaluation model of the hydrate blocking risk for submarine natural gas transportation is still lacking. In this work, a novel model is established for evaluating the hydrate risk in deepwater submarine gas pipelines. Based on hydrate growth-deposition mechanism, the mathematical model mainly consists of mass, momentum and energy conservation equations. Meantime, the model results are obtained by finite difference method and iterative technique. Finally, the model has been applied in the production of deepwater gas field (L Gas Field) in China, and the sensitivity analysis of relevant parameters has been carried out. The results show that: (a). The mathematical model can well predict the hydrate blockage risk in deepwater natural gas pipelines after verification. (b). Hydrate is easily formed at the intersection of horizontal pipeline and vertical riser, and the maximum blocking position often occurs in middle of the riser. (c). The hydrate blockage degree and length of hydrate formation region (HFR) decrease with the increase of gas transport rate. (d). The hydrate blockage degree and length of HFR decrease with the increase of gas transport temperature. (e). The hydrate blockage degree and length of HFR increase with the extension of horizontal pipeline. (f). Injecting inhibitors can effectively inhibit hydrate formation and blockage, but the improvement of transmission measures can significantly reduce the dosage of inhibitor. It is concluded that measures such as increasing gas transportation rate and temperature, shortening horizontal pipeline length, optimizing inhibitor injection point and injection rate can play a safe, economic and efficient role in hydrate preventing and controlling.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

气相色谱法测定汽油作业环境中MTBE含量

建立了汽油作业场所空气中MTBE的气相色谱测定方法。空气中的MTBE用注射器采集，直接进样，经大口径毛细管柱分离，氢焰离子化检测器检测，以保留时间定性，峰面积定量，并考察了MTBE与甲醇、正己烷的分离效果。     

广州市石井河水质污染及其对水源的影响分析

根据广州市石井河日益发展的水污染及其危害西航道饮用水源的问题，进行了深入的调查研究，剖析了造成水污染的主要原因，有针对性地提出了分期整治石井河以保护饮用水源的对策与建议，本文旨在通过对石井河水污染的分析，使人们认识到水源污染的主要来源，同时对相类似的河流－流溪河引以警惕，加强保护，防止水源上游河流受到污染。     

离子色谱法在石化工业废水分析中的应用

用IC-6离子色谱分析仪，研究石化工业废水中阴离子的测定技术，并首次建立炼油、化肥外排废水中F^-、Cl^-、NO2^-、PO4^3-、NO3^-、SO4^2-等阴离子含量测定的岗位。以含0．0054mol／L碳酸氢钠和0．0050mol／L碳酸钠为淋洗液，在电流70mA、流速1．5mL／min、泵压0～42MPa的条件下，测得各阴离子的相关系数均大于0．995、相对标准偏差（RSD）〈5．00％、加标回收率为95％～116％。     

冷摆辗模具的材料选择及其热处理

模具寿命是冷摆辗的关键问题之一。选择合理的模具材料以及采用适宜的热处理工艺可以提高冷摆辗模具的强韧性,从而提高模具寿命。基于摆动辗压工艺的基本原理,分析研究了冷摆辗模具的受力情况,并对冷摆辗模具材料的选择及热处理工艺作了探讨。     

平流式二次沉淀池中异重流现象研究

通过对影响异重流形成因素的研究,发现在异重流的形成过程中进水污泥浓度对密度的影响远大于温度对密度的影响,二沉池的进水通常形成下层异重流.利用水力模型进行示踪试验,结果表明在平流式二沉池中存在明显的回流区.异重流对二沉池处理效果的影响有利有弊.     

利用混合C9重芳烃回收磺酸盐装置的技术经济分析

介绍了回收磺酸盐生产工艺 ,对其装置的产品成本进行了测算 ,并对盈亏平衡及其敏感性进行了分析 ,进而确定了主要经济指标。     

城市大气环境质量主要影响因素分析

采用灰色关联度分析方法，对影响城市大气环境质量的因素进行了相关分析，并对呈负相关关系的影响因素关联度计算采取了倒数化算子处理，使计算结果更切合实际。     

顶空气相色谱分析法测定饮用水中的挥发性卤代烃

本文详细介绍了顶空气相色谱分析法测定的适用范围，试剂材料样品采集和试验结果等。