Cytotoxicity of the soluble and insoluble fractions of atmospheric fine particulate matter

Inhaled atmospheric fine particulate matter(PM_(2.5)) includes soluble and insoluble fractions,and each fraction can interact with cells and cause adverse effects.PM_(2.5) samples were collected in Jinan,China,and the soluble and insoluble fractions were separated.According to physiochemical characterization,the soluble fraction mainly contains watersoluble ions and organic acids,and the insoluble fraction mainly contains kaolinite,calcium carbonate and some organic carbon.The interaction between PM_(2.5) and model cell membranes was examined with a quartz crystal microbalance with dissipation(QCM-D) to quantify PM_(2.5) attachment on membranes and membrane disruption.The cytotoxicity of the total PM_(2.5) and the soluble and insoluble fractions,was investigated.Negatively charged PM_(2.5) can adhere to the positively charged membranes and disrupt them.PM_(2.5)also adheres to negatively charged membranes but does not cause membrane rupture.Therefore,electrostatic repulsion does not prevent PM_(2.5) attachment,but electrostatic attraction induces remarkable membrane rupture.The human lung epithelial cell line A549 was used for cytotoxicity assessment.The detected membrane leakage,cellular swelling and blebbing indicated a cell necrosis process.Moreover,the insoluble PM_(2.5) fraction caused a higher cell mortality and more serious cell membrane damage than the soluble fraction.The levels of reactive oxygen species(ROS) enhanced by the two fractions were not significantly different.The findings provide more information to better understand the mechanism of PM_(2.5) cytotoxicity and the effect of PM_(2.5) solubility on cytotoxicity.     

石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。     

膜法水处理技术及研究进展

综述了反渗透、微滤、超滤、纳滤、渗透蒸发、液膜等几种常见膜技术的应用现状及进展情况 ,主要对反渗透膜的原理、流程、存在的问题及开发和利用情况进行了介绍。简单概括了近年发展起来的双极膜等新膜分离技术的开发研究。展望了膜分离技术的前景     

膜分离技术处理电镀废水的实验研究

采用纳滤＋反渗透2级处理系统浓缩回收电镀铜漂洗废水。实验结果显示：在△P=1．5MPa条件下进行浓缩．纳滤膜可以使料液浓缩近10倍。纳滤膜对Cu^2＋的截留率在96％以上，对COD的截留率在57％以上。在△P=3．0MPa条件下进行浓缩，反渗透膜可以使料液浓缩近10倍。反渗透膜对Cu^2＋的截留率在98％以上，对COD的截留率在67％以上。随着料液浓度的增加，纳滤膜和反渗透膜的截留率会降低。     

电热管焊接接头挤压裂纹的分析

针对电热管焊接接头挤压产生的裂纹 ,通过采用金相显微镜观察其金相组织并用直读光谱对原材料成分进行化学成分分析 ,排除了成分、焊接工艺规范等的影响。经过对挤压过程分析 ,发现应力集中点是产生裂纹的主要原因 ,并提出了改进的方法     

膜生物反应器中膜污染研究进展

膜生物反应器是近年新发展起来的高效废水处理工艺。本文综述了国内外对膜污染机理研究的最新成果 ,介绍了相应的解决措施 ,展望了今后的发展前景。     

膜生物反应器技术的研究和应用展望

膜生物反应器是将膜分离技术与生物上结合而开发的新型系统，该文就膜生物反应器的特征、研究现状、不同形式反应器的技术参数与处理效果等。进行了综述、由于膜生物反应器具有明显的优点，故愈来愈受到人们的重视、成为研究的热点之一。膜生物反应器的研究和范围不断拓宽，有的已进入污水处理实用阶段，建议今后在开发适合于分离的特种膜方面，在组件形式，操作条件，清洗方式等对膜通量的影响方面，以及生物作用与膜分离工艺的相互     

兰州城市主要大气污染治理方案和环境效益

根据兰州市经济技术条件，提出多种大气污染治理工程方案。用数值模式计算分析了这些单项方案和综合方案可减少的大气污染物排放量和空气质量改善程度，推荐了当前可行的投资低、环境效益好的优化综合方案，该综合方案可使兰州市区空气中SO2浓度下降24.6%-75.4%，TSP降10.4%-45.4%；降少数网格点外，SO2浓度都不出现超标。     

Petroleum waste biodegradation with porous biomass support system (PBSS) on rotating biological contactor

A laboratory scale study was conducted to assess the feasibility of the new coupling of rotating biological contactor (RBC) plus porous biomass support system (PBSS) using polyurethane foam as porous support media to biodegrade petroleum refinery wastewater. Polyurethane foam was attached on disks of two four-stage laboratory scale cascade connected RBC units.The two RBC units were operated simultaneously at different but constant, flowrates giving hydraulic loading rates of 0.01, 0.02, 0.03, 0.04 m3/m2/d in two runs keeping the same rotational speed 10 r/min throughout. Organic loading was a less controllable factor in this study.For all of the hydraulic loadings, it was found that the removal efficiency of total chemical oxygen demand (TCOD) and oil were above 80 percent. Ammonia nitrogen and phenol removal were above 90 and 80 percent respectively. The maximum biomass concentration within polyurethane foam was about 30 g/m2 in the first stage for 0.03 m3/m2/d hydraulic loading.The results show that t     

天津市环境空气SO2污染现状及分析

天津环境空气SO2的年均浓度始终超过国家二级标准。年均浓度超标主要因为采暖期SO2浓度过高所至，采暖期SO2平均浓度是非采暖期浓度的3倍左右；在2002--2005年的三个采暖期里，SO2污染逐年加重，导致了年均SO2浓度的逐年升高。天津SO2污染与采暖期增多的低烟囱排放、不利的气象条件有关，也与流动源的隐性排放、能源利用效率低下有关。结合天津经济发展速度、每年煤耗增量、现有环境治理手段来做预测，空气SO2浓度要在未来几年内达到国家二级标准仍是不可能的。