Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

Filterability of oil sands tailings

In Canadian oil sands mining operations, bitumen is extracted from oil sands using the hot water extraction process, which produces tremendous amounts of tailings. Currently, these tailings are disposed of in large ponds, in which coarse particles settle out relatively quickly and fine particles remain suspended in water and settle very slowly. After years of settling, the fine particles form a stable suspension in water known as mature fine tailings (MFTs). Long-term storage of the MFT is costly and poses a major environmental liability.Oil sands companies are now actively investigating different approaches to replace or reduce the use of oil sands tailings ponds. Filtration of the tailings to produce “dry tailings” for stacking is now being investigated as an alternative by a number of companies. Fast water drainage is a critical step for the filtration process. In this paper, we use simple laboratory-scale filtration tests to evaluate the filterability of the oil sands tailings and to generate a parameter that can be used in filtration scale-up. It was found that the filterability of the original coarse oil sands tailings was relatively low. However, after the fines are flocculated with the coarse particles to form uniform flocs the filterability was improved by several orders of magnitude. The results demonstrate that filtration of the flocculated coarse tailings to produce the “dry” stackable tailings may be viable.     

A method to estimate the impact of clear-cutting on nutrient concentrations in boreal headwater streams

Large-scale forestry operations, like clear-cutting, may impair surface water quality if not done with environmental considerations in mind. Catchment and country level estimates of nutrient loads from forestry are generally based on specific export values, i.e., changes in annual exports due to the implemented forestry operations expressed in kg ha⁻¹. We introduce here a specific concentration approach as a method to estimate the impact of clear-cutting on nutrient concentrations and export in headwater streams. This new method is potentially a more dynamic and flexible tool to estimate nutrient loads caused by forestry, because variation in annual runoff can be taken into account in load assessments. We combined water quality data from eight boreal headwater catchment pairs located in Finland and Sweden, where the effect of clear-cutting on stream water quality has been studied experimentally. Statistically significant specific concentration values could be produced for total nitrogen, nitrate, ammonium, and phosphate. The significant increases in the concentrations of these nutrients occurred between 2 and 6 years after clear-cutting. Significant specific concentration values could not be produced for total phosphorus and total organic carbon with the whole dataset, although in some single studies significant increases in their concentrations after clear-cutting were observed. The presented method enables taking into account variation in runoff, temporal dynamics of effects, and the proportional size of the treated area in load calculations. The number of existing studies considering large site-specific variation in responses to clear-cutting is small, and therefore further empirical studies are needed to improve predictive capabilities of the specific concentration values.     

Determination of specific gravity of municipal solid waste

This investigation was conducted to evaluate experimental determination of specific gravity (G_s) of municipal solid waste (MSW). Water pycnometry, typically used for testing soils was adapted for testing MSW using a large flask with 2000 mL capacity and specimens with 100–350 g masses. Tests were conducted on manufactured waste samples prepared using US waste constituent components; fresh wastes obtained prior and subsequent to compaction at an MSW landfill; and wastes obtained from various depths at the same landfill. Factors that influence specific gravity were investigated including waste particle size, compaction, and combined decomposition and stress history. The measured average specific gravities were 1.377 and 1.530 for as-prepared/uncompacted and compacted manufactured wastes, respectively; 1.072 and 1.258 for uncompacted and compacted fresh wastes, respectively; and 2.201 for old wastes. The average organic content and degree of decomposition were 77.2% and 0%, respectively for fresh wastes and 22.8% and 88.3%, respectively for old wastes. The G_s increased with decreasing particle size, compaction, and increasing waste age. For fresh wastes, reductions in particle size and compaction caused occluded intraparticle pores to be exposed and waste particles to be deformed resulting in increases in specific gravity. For old wastes, the high G_s resulted from loss of biodegradable components that have low G_s as well as potential access to previously occluded pores and deformation of particles due to both degradation processes and applied mechanical stresses. The G_s was correlated to the degree of decomposition with a linear relationship. Unlike soils, the G_s for MSW was not unique, but varied in a landfill environment due both to physical/mechanical processes and biochemical processes. Specific gravity testing is recommended to be conducted not only using representative waste composition, but also using representative compaction, stress, and degradation states.     

Will photosynthetic capacity of aspen trees acclimate after long-term exposure to elevated CO2 and O3?

Photosynthetic acclimation under elevated carbon dioxide (CO₂) and/or ozone (O₃) has been the topic of discussion in many papers recently. We examined whether or not aspen plants grown under elevated CO₂ and/or O₃ will acclimate after 11 years of exposure at the Aspen Face site in Rhinelander, WI, USA. We studied diurnal patterns of instantaneous photosynthetic measurements as well as A/C_i measurements monthly during the 2004-2008 growing seasons. Our results suggest that the responses of two aspen clones differing in O₃ sensitivity showed no evidence of photosynthetic and stomatal acclimation under either elevated CO₂, O₃ or CO₂ + O₃. Both clones 42E and 271 did not show photosynthetic nor stomatal acclimation under elevated CO₂ and O₃ after a decade of exposure. We found that the degree of increase or decrease in the photosynthesis and stomatal conductance varied significantly from day to day and from one season to another.     

Exposure to moderate concentrations of tropospheric ozone impairs tree stomatal response to carbon dioxide

With rising concentrations of both atmospheric carbon dioxide (CO₂) and tropospheric ozone (O₃), it is important to better understand the interacting effects of these two trace gases on plant physiology affecting land-atmosphere gas exchange. We investigated the effect of growth under elevated CO₂ and O₃, singly and in combination, on the primary short-term stomatal response to CO₂ concentration in paper birch at the Aspen FACE experiment. Leaves from trees grown in elevated CO₂ and/or O₃ exhibited weaker short-term responses of stomatal conductance to both an increase and a decrease in CO₂ concentration from current ambient level. The impairement of the stomatal CO₂ response by O₃ most likely developed progressively over the growing season as assessed by sap flux measurements. Our results suggest that expectations of plant water-savings and reduced stomatal air pollution uptake under rising atmospheric CO₂ may not hold for northern hardwood forests under concurrently rising tropospheric O₃.     

Evaluation of leachate composition by multivariate data analysis (MVDA)

Landfills generate emissions in the form of gas and leachate. The emissions are often measured within monitoring programmes. It is likely that the requirements of such monitoring programmes can be extended in the future, particularly in light of the increased interest in specific organic substances. Multivariate data analyses (MVDA) have been used to evaluate the possibility of predicting the content of specific organic substances from more common analyses. The results indicate that this is possible for a specific leachate. MVDA can also be used to reduce the number of analyses performed within existing monitoring programmes while retaining information about all the variables formerly included in the programmes.     

Specific Conductance and pH as Indicators of Watershed Disturbance in Streams of the New Jersey Pinelands, USA

/ We used linear regression to independently and jointly relate specific conductance and pH measured at New Jersey Pinelands stream sites to the percentage of altered land in a watershed. Percentage altered land included developed and agricultural land uses and represented watershed disturbance for a given site. Median values calculated for a 2-year period (September 1992 through August 1994) characterized pH and specific conductance at the study sites. We found the relationships between the median values for both water-quality measures and percentage altered land for a site to be consistent across subregion and dominant altered-land use. Our results also demonstrated that the water-quality/altered-land relationships developed using median values were similar to relationships developed using data from any single-sample period within the entire study period. Individually, pH and specific conductance explained 48% and 56%, respectively, of the variability in watershed disturbance among study sites. The joint use of pH and specific conductance explained 79% of the watershed disturbance variability among sites. The joint use of these easily obtained water-quality measures can provide a quick assessment of instream water-quality impacts from upstream watershed disturbance at any Pinelands stream site. Additionally, a range in pH and specific conductance, and hence a range in ambient water quality, can be predicted for a given altered-land percentage or a change in existing altered-land conditions.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

A graphical screening method for assessing stream water quality using specific conductivity and alkalinity data

In areas of varying geology, it is difficult to infer water quality from specific conductance or electrical conductivity (EC) data without an understanding of the expected range of EC values based on local bedrock composition. This paper describes a user-friendly graphical screening method that addresses this issue by plotting the EC against concurrent alkalinity data, which correlates well with the presence of carbonate bedrock under natural conditions, and thus serves as an index of bedrock type. The upper limit of EC vs. alkalinity expected in a stream is determined using regional groundwater quality data, based on the assumption that stream chemistry reflects groundwater under baseflow conditions. Stream samples with EC/alkalinity values that consistently plot above this limit are considered impacted by anthropogenic sources. The effect of dilution and runoff on the EC vs. alkalinity plot of stream samples is considered using a simple baseflow/storm runoff-mixing model. The graphical method's utility as a screening tool is demonstrated by application to stream chemistry data from watersheds of southeastern Pennsylvania and northwestern New Jersey in several distinct geologic settings; however the method is general and widely applicable to watersheds in humid temperate regions. Its use is intended for watershed stewards of both professional and nonprofessional qualification.