基于全过程控制的铁路建设项目生态环境保护发展状况评估

铁路建设项目的生态环境影响在其全生命周期内各时期有不同的表现形式.在阐述不同时期应重点关注的生态环境保护问题的基础上,从全过程控制角度,建立了涵盖前期规划、建设期、运营期3个阶段的铁路建设项目生态环境保护发展状况评估指标体系,运用层次分析法对各指标进行权重评定.根据权重计算结果对铁路建设项目生态环境保护工作中重要时期及...     

Confirmation of polychlorinated biphenyl (PCB) distribution in the blood and verification of simple quantitative method for PCBs based on specific congeners

We measured the concentration of each polychlorinated biphenyl (PCB) congener in whole blood, plasma and blood cells, and investigated the distribution of PCBs in human blood using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The PCB concentrations in plasma and whole blood in terms of lipid concentrations were almost equal, with a correlation coefficient of r = 0.972. In the blood, the ratio of PCBs in blood cells to those in plasma was generally about 1:9 and the congener distribution patterns in blood cells and plasma were similar.We performed verification of a simple mass screening method by obtaining information on the main PCB congeners for investigations on human accumulation and exposure. The total concentration of the seven PCB congeners (UNEP-7) proposed to the United Nations Environment Programme (UNEP) by Muir and Morita was about 50% of the total concentration of all PCB congeners, and UNEP-30 was about 80%. The seven main congeners in the blood (MCB-7) showed a value that was about 60%, and MCB-30 showed a value that was about 90%. Determinations with the main congeners in the blood showed a correlation of r = 0.990 or more between the main eight congeners (MCB-7 plus #74) and the total PCB concentration for all congeners. The results suggest that, although total PCB concentration can be effectively estimated from the main seven congeners, the main eight congeners would be preferable, and that the use of these congeners in the simple mass screening method would be effective for populations in areas uncontaminated by PCBs.     

Assessing inter-laboratory comparability and limits of determination for the analysis of cyclic volatile methyl siloxanes in whole Rainbow Trout (Oncorhynchus mykiss)

Cyclic volatile methyl siloxanes (cVMS) are high volume production chemicals used in a wide range of industrial and consumer products. Three cVMS compounds (D4, D5, and D6) have and are undergoing environmental risk evaluations in several countries and have been proposed for legal regulation in Canada. As interest in monitoring concentrations of these chemicals in the environment increase, there is a need to evaluate the analytical procedures for cVMS in biological matrices in order to assess the quality of data produced. The purpose of this study was to determine laboratory testing performance for measuring residues of D4, D5, and D6 in a standard set of fish homogenate samples and to estimate limits of determination for each substance. The samples sent to each laboratory consisted of homogenized whole body tissues of hatchery raised rainbow trout which were fed food fortified with D4, D5, and D6 (dosed) and trout that were fed standard food rations (control). The participants analyzed each sample using their analytical method of choice using their own standards and procedures for quantification and quality control. With a few exceptions, participating laboratories generated comparable results for D4, D5, and D6 in both the dosed and control samples having z-scores between 2 and −2. Method detection limits for the whole fish matrix were on average 2.4 ng g⁻¹ ww for D4, 2.3 ng g⁻¹ ww for D5, and 1.8 ng g⁻¹ ww for D6.     

烟尘烟气监测全程序质量监督评价方法研究

建立了烟尘、烟气监测全程序质量监督体系,确定了监督检查工作需要控制的环节,并细化了各环节需要重点关注的内容。以层次分析法等关键技术为基础,通过赋予监测全过程各环节不同的指标权重,建立了统一化、标准化的综合评价模式。研究将评价体系分为2个层次,一级指标3个,二级指标19个,并确定了每个指标的测评内容及计算方法。将该体系应用于6家监测机构的质量监督工作,证明其实用性和适用性良好。     

试论社会主义市场经济条件下的企业全员安全管理

重点论述社会主义市场经济条件下的企业全员安全管理的概念、特点和基本要求，企业开展全员安全管理的重要性，应遵循的原则和实施措施。     

Assessment of potential dermal and inhalation exposure of workers to the insecticide imidacloprid using whole-body dosimetry in China

In China, although improvements to the pesticide registration process have beenmade in last thirty years, no occupational exposure data are required to obtain a commercial license for a pesticide product. Consequently, notably little research has been conducted to establish an exposure assessment procedure in China. The present study monitored the potential dermal operator exposure from knapsack electric sprayer wheat field application of imidacloprid in Liaocheng City, Shandong Province and in Xinxiang City, Henan Province, China, using whole-body dosimetry. The potential inhalation exposure was determined using a personal air pump and XAD-2 sample tubes. The analytical method was developed and validated, including such performance parameters as limits of detection and quantification, linear range, recovery and precision. The total potential dermal and inhalation exposures were 14.20, 16.80, 15.39 and 20.78 mL/hr, respectively, for the four operators in Liaocheng and Xinxiang, corresponding to 0.02% to 0.03% of the applied volume of spray solution. In all trials, the lower part (thigh, lower leg) of the body was the most contaminated, accounting for approximately 76% to 88% of the total exposure. The inhalation exposure was less than 1% of the total exposure. Such factors as the application pattern, crop type, spray equipment, operator experience and climatic conditions have been used to explain the exposure distribution over the different parts of the body. As indicated by the calculated Margin of Exposure, the typical wheat treatment scenarios when a backpack sprayer was used are considered to be safe in terms of imidacloprid exposure.     

控制论在企业环境管理中的应用

在企业环境管理运用控制论实施污染防治全过程控制，来提高清洁生产水平，降低物耗，能耗，提高资源利用率，完善保护环境的自我约束机制，落实环境综合整治定量考核，以达到发展生产，提高经济效益和改善环境的目的。     

Contaminated sediments and bioassay responses of three macroinvertebrates, the midge larva Chironomus riparius, the water louse Asellus aquaticus and the mayfly nymph Ephoron virgo

Bioassays are widely used to estimate ecological risks of contaminated sediments. We compared the results of three whole sediment bioassays, using the midge larva Chironomus riparius, the water louse Asellus aquaticus, and the mayfly nymph Ephoron virgo. We used sediments from sixteen locations in the Dutch Rhine-Meuse Delta that differed in level of contamination. Previously developed protocols for each bioassay were followed, which differed in sediment pretreatment, replication, and food availability. The Chironomus bioassay was conducted in situ, whereas the other two were conducted in the laboratory. The measured endpoints, survival and growth, were related to contaminant levels in the sediment and to food quantity in water and sediment.

Only the response of A. aquaticus in the bioassay was correlated with sediment contamination. Food availability in overlying water was much more important for C. riparius and E. virgo, thereby masking potential sediment contaminant effects. We conclude that growth of A. aquaticus was depressed by sediment contamination, whereas growth of E. virgo and C. riparius was stimulated by seston food quantity. We discuss that the trophic state of the ecosystem largely affects the ecological risks of contaminated sediments.     

我国北方中小城市工业大气污染物排放全过程控制的分析研究

排放污染物全过程控制这种方式,在当今世界污染控制领域已被广泛接纳,作为发展中的中国,也应该把污染物削减的重点从末端治理转向全过程控制。该研究以赤峰市为例,对大气污染物排放的全过程(燃料,燃烧设备,净化效率)进行分析研究,最终得出我国北方中小城市工业大气污染物排放全过程控制的可行性及方法。      

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.