江汉平原粮食开发必须走优质高产高效的道路

分析江汉平原粮食生产的优势与问题,运用商品经济的观念,提出改革开放新形势下加快江汉平原粮食开发的设想,即依托市场,按照价值规律,科学地调整种植业比例和粮食种类结构,发展优质品种,扩大优化模式及采用高新技术等,通过优质、高产、高效,促进江汉平原粮食生产的发展。     

资源型城市可持续发展能力的演变与调控

作为特殊的经济区，资源型城市的衰落与振兴日益成为社会关注的热点。本文从分析资源型城市可持续发展能力入手，论述了资源型城市发展能力的成长阶段及演变特征，提出了资源城市可持续发展能力调控的模式和途径。     

Structural Adjustment of Oasis Agriculture in Xinjiang

As a special basic economic region in China, Xinjiang is situated in the arid area in the Northwest China. Oasis agriculture is the basis of the national economy. The development of oasis agriculture helps to accelerate the development of economy, social and environment. After 50 years of practice, from 1949 to 2002, oasis agriculture in Xinjiang enhanced rapidly the scale of agricultural industry and had great changes in its structure. The amount of cultivated area rose from 120.97*102 ha t…     

我国硒淡水水生生物水质基准值推导

水体中硒含量过高会导致水生生态系统退化,而中国现有的地表水环境质量标准对硒的标准值设定并不是基于我国水生生物相关毒理学研究得出的,难以因地制宜地保护我国水生生物.为保护我国水生生物,本研究利用物种敏感度分布法,推导出基于最大无效应浓度（NOEC）、最低有效应浓度（LOEC）的慢性硒（无机）淡水水质一级基准值和基于半数致死效应浓度（LC₅₀）、半数最大效应浓度（EC₅₀）、半数抑制浓度（IC₅₀）的急性硒（无机）淡水水质二级基准值分别为0.58 μg·L^-1、0.52 mg·L^-1,发现我国现有的水质标准可能会对我国水生生物造成欠保护.进一步推导出为保护我国鱼类的硒（无机）淡水水质一级、二级基准值分别为0.21 μg·L^-1、1.60 mg·L^-1,以及硒淡水鱼类饲料有机硒和无机硒含量一级基准值分别为97 μg·kg^-1和98 μg·kg^-1.本研究基于硒对水生生物的急性和慢性毒性效应,推导出硒的系列基准值,为保护我国淡水水生生物安全的标准制定提供数据支撑和科学依据.     

Monitoring of Butter and Ghee (Clarified Butter Fat) for Pesticidal Contamination from Cotton Belt of Haryana, India

Butter (45) and ghee (55) samples were collected from rural and urban areas of cotton growing belt of Haryana and analysed for detecting the residues of organochlorine, synthetic pyrethroid and organophosphate insecticides. The estimation was carried out by using multi residue analytical technique employing GC-ECD and GC-NPD systems equipped with capillary columns. Butter samples were comparatively more contaminated (97%) than ghee (94%), showing more contamination with organochlorine insecticides from urban samples. About 11% samples of butter showed endosulfan residues above MRL value and 2% samples had residues of synthetic pyrethroids and organophosphates each above their respective MRL values. In ghee, residues of HCH & DDT both and of endosulfan exceeded the MRL values in 5 and 20% samples, respectively. Among organophosphates, only chlorpyriphos was detected with 9% samples showing its residue above MRL value. Irrespective of contamination levels, residues above the MRL values were more in ghee. More extensive study covering other agricultural regions/zones of Haryana has been suggested to know the overall scenario of contamination of milk products.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.     

对大气采样误差的理论研究

环境监测数据是环境保护工作的基础,监测仪器设备的精良及监测方法的科学性则是获得优质数据的保障工具.本文运用数学方法对目前广泛使用的采样仪器进行了采样误差的分析研究,指出了改善仪器和改善监测方法去获取更精确数据的途径.     

华北山区温度推算模式和应用

利用华北山区气象站观测的温度与其所在纬度、经度和高度，分山区建立宏观地面气温场方程。采用１：２０万地形图，以１０＇经、纬度为步长，判读其高度值，代入已建立好的方程中，经地形项订正，推算华北山区年、月平均温度、年较差和ΣＴ＇≥１０℃，其精度达极显著水平。计算结果使我们对华北山区热量资源有了新的认识，最后求算华北山区的主要水果最优品质种植上限高度。     

催化快速法测定COD_(Cr)定量下限的研究

催化快速法测定CODCr是我国目前环境监测中普遍使用的最快速、简便、可靠的方法 ,该法的检测范围是 60～ 1 0 0 0mg/l,我们经过研究测出催化快速法的定量下限为 1 0mg/l,扩大了该法的应用范围。     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数