VARIABILITY IN MEASURED BEDLO AD-TRANSPORT RATES1

ABSTRACT: Variability in bedload-transport rates during constant water discharge is an inherent part of the bedload-transport process. Although this variability has been measured extensively in the laboratory, similar information generally is not available from field measurements. During a four-day period of nearly constant water discharge, four sets of consecutively collected bedload samples, ranging from 43 to 120 samples, were obtained at the same cross channel location using a standard 65-pound Helley-Smith bedload sampler. When the measured transport rates are converted to dimensionless rates and plotted as cumulative frequency distributions, they show good agreement with a theoretical probability distribution function of rates derived for the case of ripples on dunes. The distributions show that during constant water discharge individual measured rates at a fixed point vary from near zero to four times the mean rate, and 60 percent of the sampled rates will be less than the mean. Because of the large variation in transport rates that occurs at every location in the cross section, many observations are required to establish an accurate estimate of the mean rate at any given location.     

BEDLOAD TRANSPORT IN A POOL-RIFFLE SEQUENCE OF A COASTAL ALASKA STREAM1

ABSTRACT: A Helley-Smith pressure differential bedload sampler was used to measure bedload transport at consecutive riffle sections of a riffle-pool-riffle sequence on Bambi Creek, a small (154 ha), second-order stream on Chichagof Island, Alaska, during four storms over a 2-year period. Maximum bedload transport rate measured was 4920 kg/h at a streamflow of 2.35 m³/s corresponding to a storm having a 5-year return interval. Transport of larger sediment (> 8 mm) varied systematically with streamflow at the two sampling locations. At flows up to approximately bankfull, transport of large sediment was greatest at the upstream site; at flows above bankfull, transport of large sediment was greatest at the downstream site. The net import of large sediment to the pool during moderate stormflows and net export of large sediment from the pool during flows above bankfull may be related to a “convergence” or “reversal” of competence between the upstream riffle and subsequent pool at flows approximating bankfull stage. Cross-sections monitored within the study reach indicate that stormflows resulted in net filling of the riffle sections and net scour of the pool; periods of low streamflow resulted in net scour of the riffles and net filling of the pooL     

A FIELD TECHNIQUE FOR WEIGHING BEDLOAD SAMPLES1

ABSTRACT: A technique for weighing bedload samples that was developed for laboratory use has been modified for field application. The technique involves determining the submerged weight of bedload samples as they are collected. The submerged weights are converted to dry weights from a knowledge of the specific gravity of the bedload material. The technique makes bedload transport data available immediately and eliminates costly and time-consuming steps involved with saving samples for laboratory analysis. Only samples designated for particle-size or other lab analyses need to be saved.     

A RIFFLE STABILITY INDEX TO EVALUATE SEDIMENT LOADING TO STREAMS1

ABSTRACT: Riffles in moderately entrenched stream reaches with gradients of 2 percent to 4 percent that have received excessive sediment from upstream have a distinctly different and higher proportion of smaller mobile particles than riffles in systems that are in dynamic equilibrium. The mobile fraction on the riffle can be estimated by comparing the relative abundance of various particle sizes present on the riffle with the dominant large particles on an adjacent bar. Riffle particles smaller than the dominant large particles on the bar are interpreted as mobile. The mobile percentile of particles on the riffle is termed “Riffle Stability Index” (RSI) and provides a useful estimate of the degree of increased sediment supply to riffles in mountain streams. The RSI addresses situations in which increases in gravel bedload from headwaters activities is depositing material on riffles and filling pools, and it reflects qualitative differences between reference and managed watersheds. The RSI correlates well with other measures of stream channel physical condition, such as V and the results of fish habitat surveys. Thus, it can be used as an indicator of stream reach and watershed condition and also of aquatic habitat quality.     

INFLUENCES OF INCREASED SAND DELIVERY ON THE MORPHOLOGY OF SAND AND GRAVEL CHANNELS1

ABSTRACT A flume study was conducted to examine (1)changes in the particle-size distribution of sediments in riffles due to the proportion of sand in transport and the total rate of bedload transport at the time the riffle is deposited and (2) the effect of high sand transport rates on the stability of gravel riffles. The median particle size of sediment deposited in the riffle was larger than that of the sediment in transport. Small but significant (a = 0.05) decreases in the median particle size of riffle sediments resulted as the sand-to-gravel ratio. Increased concentrations of sand in transport caused previously stable gravel riffles to undergo scour. These results, in combination with information from other studies, suggest that an alluvial channel with pool-riffle sequences and with sand and gravel beds may respond to an increased delivery of sand by reducing form roughness. Form roughness can be reduced by degrading riffles and filling pools. Subsequent responses may be increases in width-to-depth ratio and slope.     

THE VOLUME OF FINE SEDIMENT IN POOLS: AN INDEX OF SEDIMENT SUPPLY IN GRAVEL-BED STREAMS1

ABSTRACT: During waning flood flows in gravel-bed streams, finegrained bedload sediment (sand and fine gravel) is commonly winnowed from zones of high shear stress, such as riffles, and deposited in pools, where it mantles an underlying coarse layer. As sediment load increases, more fine sediment becomes available to fill pools. The volume of fine sediment in pools can be measured by probing with a metal rod, and, when expressed as the fraction (V*) of scoured residual pooi volume (residual pool volume with fine sediment removed), can be used as an index of the supply of mobile sediment in a stream channel. Mean values of V* were as high as 0.5 and correlated with qualitative evaluations of sediment supply in eight tributaries of the Trinity River, northwestern California. Fine-sediment volume correlated strongly with scoured pool volume in individual channels, but plots of V* versus pool volume and water surface slope revealed secondary variations in fines volume. In sediment-rich channels, V* correlated positively with scoured pool volume; in sediment-poor channels, V* correlated negatively with water-surface slope. Measuring fine sediment in pools can be a practical method to evaluate and monitor the supply of mobile sediment in gravel-bed streams and to detect and evaluate sediment inputs along a channel network.     

BEDLOAD TRANSPORT IN AN OREGON COAST RANGE STREAM1

Bedload transport was measured with two sampler types (vortex tube and Helley-Smith pressure differential) for three major storms at Flynn Creek, which drains a 2.2-km² forested watershed in the Oregon Coast Range. The largest flow during two winters of monitoring had a peak discharge of 0.79 m³ s^-1 km^-2, with an associated recurrence interval of ? 1.3 yr. The median particle diameter of sediment in transport was generally < 1 mm. The vortex tube and its associated sample box were relatively inefficient at trapping particles < 10 mm in diameter; however, even after transport rates were adjusted to account for sampling deficiencies of the sample box, they still averaged 42–47 percent of those obtained with the Helley-Smith sampler. Organic matter and sand sized sediments in transport also were observed to partially plug the 0.2-mm-mesh bag of the Helley-Smith sampler. Large temporal variability in bedload transport rates was measured during periods of high flow.     

排水管道内不同粒径沉积颗粒物冲刷率的分析与计算

为探究和量化在水流冲刷下,排水管道中不同粒径颗粒物冲刷沉积的过程,本文模拟排水管道内沉积颗粒的冲刷过程.冲刷过程中,粒径较小的悬移质颗粒(小于0.1 mm),在管道沿线取样测得水流中悬浮固体质量浓度(SS);粒径较大的推移质颗粒(0.1—2 mm),测得管道沿线不同位置沉积的颗粒质量.并建立两个数学模型分别计算排水管道内两类颗粒物的冲刷率.研究发现,悬移质颗粒,以水流中SS为依据,可计算出输送通量和冲刷率;推移质颗粒,以管道不同位置沉积下来的颗粒质量为依据,拟合出了管道中的沉积分布函数,是以e为底数的指数函数,可计算出冲刷量和冲刷率.模型计算出的冲刷率呈现出规律性:悬移质颗粒被冲刷成悬浮状态,随水流迁移过程中部分会再次沉积,使得悬移质颗粒的冲刷率从管道前段至中后段逐步降低,如初始沉积质量为100 g的0.045 mm悬移质颗粒,在0.30 m·s^-1的冲刷流速下,计算出管道前段冲刷率为78.94%,最终在管道后段降至13.89%;对于两类颗粒而言,颗粒物粒径越小,冲刷流速越大,初始沉积质量越小,冲刷率越高.     

SEDIMENT TRANSPORT DURING A CONTROLLED RESERVOIR RELEASE1

The transport of bedload and suspended sediments and particulate organic matter was evaluated in Huntington Creek, Utah, during a controlled release of water from Electric Lake Reservoir from August 7–10, 1979. Effects of the release on channel geometry and riffle composition also were assessed. Bedload transport rates increased from zero to 1,650 and 1,500 kg/hr at two cross sections as discharge was increased from 0.4 to 4.9 m³/s; transport rates then decreased erratically as discharge was held constant. Cross section measurements and sediment size analysis indicate that flows were insufficient to transport riffle sediments. Rapid increases in the transport rates of suspended sediments and particulate organic matter also occurred during rising discharge and again decayed when discharge became constant. Suspended sediment concentrations for samples obtained with an automatic pumping sampler were generally less than those found for samples obtained with a DH-48 sampler. Biological measurements still are needed to determine if such a release can improve fisheries habitat by removing fine sediments.     

长江口南港北槽河床底质时空分布特征分析

在前人研究及大量长时间、连续、大范围河床底质现场采样资料的基础上,对长江口南港北槽河床底质时空分布特征进行了初步分析,并从河床底质的角度对长江口深水航道回淤物质来源进行了初步的探讨。研究表明:长江口河床质具有总体较细、上粗下细以及时空分布不均匀等特点;南港北槽河床质的变化与风浪掀沙、底沙过境、洪枯季变化等因素有关;南港段河床质季节性变化大于北槽;南港河段河床底质有细化的趋势;长江口深水航道回淤物质偏粗且与周边河床质组成相近,航道回淤应关注滩槽泥沙以近底高含沙水流方式的交换。