广州轨道交通三号线高速行驶条件下对安全限界的影响研究

给出了轨道交通车辆横向偏移量的计算方法 ,并应用列车 -线路动力耦合模型 ,分析了广州地铁三号线的安全限界变化问题。确定了当前按 80km/h行车速度设计的建筑限界能满足 13 0km/h行车速度的要求 ,限界尺寸不需改动可保证列车运行安全平稳     

基于空间适宜性评价和人口承载力的贵溪市中心城区城市开发边界的划定

城市开发边界的划定能够合理引导城市空间的有序发展,控制其无序蔓延。论文以典型的资源型城市贵溪市为研究区,从空间适宜性评价、人口承载力、城市规模以及城市总体规划和土地利用总体规划（简称“两规”）衔接等方面探索有效的城市开发边界划定方法。空间适宜性评价综合考虑自然、空间可达性和生态条件,运用聚类分析法确定区域内不宜作为开发建设的生态底线区域和适宜建设开发区域的高低等级,以此确定城市开发边界的发展方向。通过灰色预测GM(1,1)模型预测研究区2020年人口总量,并基于土地资源和水资源承载力验证当地所能容纳的最大人口总量,同时确定城市规模和划定城市开发边界。以空间适宜性评价、人口承载力、城市规模预测、两规衔接和空间形态控制等方法倒逼缩减建设用地,从而划定城市发展的刚性和弹性增长边界。     

颗粒物分界层Mie散射激光雷达识别的sigmoid算法

基于成都市2013年6月~2015年5月期间由Mie散射激光雷达探测的大气消光系数廓线资料,发现混合层以上在颗粒物消光和分子消光之间一致存在一个S型的过渡区,利用sigmoid函数对此分布形态进行模拟,通过计算该函数上下曲率最大点所在的高度,据此提出了颗粒物分界层Mie散射激光雷达识别的sigmoid算法.针对该算法模拟效果的分析表明,颗粒物分界层过渡区附近大气消光系数理论廓线和实测廓线保持了高度的相关性,二者在春夏秋冬四季的相关系数（R）分别为0.9971±0.0052、0.9935±0.0167、0.9979±0.0038和0.9990±0.0021（均通过α=0.05的显著性检验）.基于sigmoid算法计算的颗粒物分界层过渡区与成都市温江站探空资料得到的逆温层之间存在很好的对应关系.     

考虑边界条件不确定性的地下水污染风险分析

为分析边界条件不确定性对地下水污染质运移数值模拟模型输出结果的影响,运用Monte Carlo方法对一算例进行阐明,并从污染风险预报方面对模拟结果进行分析.为减少重复调用模拟模型产生的大量计算负荷,将边界条件（第一类边界条件-水头值）作为随机变量,建立地下水污染质运移数值模拟模型的Kriging替代模型,在保证较高精度的同时,实现了Monte Carlo模拟.结果表明：边界条件的不确定性,对地下水污染质运移数值模拟模型预报的结果有很大影响,考虑与未考虑边界条件不确定性得到的研究区污染羽分布差别较大.对地下水污染质运移数值模拟模型的Monte Carlo模拟结果进行统计与分析,可以评估研究区观测井1,2,3污染物浓度预报结果的可靠程度,并且可以预报出研究区观测井1,2,3遭受不同程度污染的风险.     

一种模拟动力学边界条件的环境振动试验方法研究

目的提高环境振动试验的可靠性。方法以某典型钛合金蜂窝夹芯壁板试验件为例,提出一种模拟试验件动力学边界条件的试验方法,在试验件周围引入弹性连接件,再通过刚性转接工装与振动台台面连接,以试验件在试验安装状态下的共振频率及振型节线位置为优化目标,以弹性连接件的外形尺寸及厚度为优化变量,对弹性连接件进行优化设计,从而模拟试验件真实的动力学边界条件。结果弹性连接件的优化设计使得试验件在试验安装状态下前两阶共振频率与试验要求相差小于8%,而且振型节线位置与试验要求基本重合,达到了模拟试验件真实动力学边界条件的设计目标。结论对于壁板类试验件,在传统刚性夹具的基础上引入弹性连接件的试验方法,可以较好地模拟试验件真实动力学边界条件,提高环境振动试验的可靠性,并且这种方法对试验费用及试验周期影响较小,具有良好的工程应用前景。     

Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.     

Pearce型构造岩浆地球化学判别图评述——以玄武岩为例

自从六十年代板块构造的概念诞生以来,人们认识到有必要探讨古地理和古构造重建的方法.一段时期以来,很多学者(如Gilluly,1971)认为,岩浆作用与特定的大地构造环境紧密相关,不同的岩浆类型或火山岩系列产在一定的地壳环境,因而出现了许多运用主要或微量元素资料的分类体系或判别图.基于Irvine和Barager(1971)以及Miyashiro(1973)发表的主要元素图解能用来判别岩浆类型,而Pearce(1976)则介绍     

Insights into multidimensional transport flux from vertical observation and numerical simulation in two cities in North China

This study represents the first quantitative evaluation of pollution transport budget within the boundary layer of typical cities in the Beijing-Tianjin-Hebei (BTH) region from the perspective of horizontal and vertical exchanges and further discusses the impact of the atmospheric boundary layer (ABL)-free troposphere (FT) exchange on concentration of fine particulate matter (PM_2.5) within the ABL during heavy pollution. From the perspective of the transport flux balance relationship, differences in pollution transport characteristics between the two cities is mainly reflected in the ABL-FT exchange effect. The FT mainly flowed into the ABL in BJ, while in SJZ, the outflow from the ABL to the FT was more intense. Combined with an analysis of vertical wind profile distribution, BJ was found to be more susceptible to the influence of northwest cold high prevailing in winter, while sinking of strong cold air allowed the FT flowing into the ABL influence the vertical exchange over BJ. In addition, we selected a typical pollution event for targeted analysis to understand mechanistic details of the influence of ABL-FT exchange on the pollution event. These results showed that ABL-FT interaction played an important role in PM_2.5 concentration within the ABL during heavy pollution. Especially in the early stage of heavy pollution, FT transport contributed as much as 82.74% of PM_2.5 within the ABL. These findings are significant for improving our understanding of pollution transport characteristics within the boundary layer and the effect of ABL-FT exchange on air quality.     

不同声学元件在公路声屏障中的应用

通过对公路声屏障不同声学元件声学性能的比较研究，阐明了两种声学元件在治理交通噪声中的差别，指出吸声共振型声学元件将是未来公路声屏障的发展方向，该研究结论对于开展公路声障声学设计有较为重要的参考价值     

兰州西固工业区夏季光化学烟雾污染的气象条件

通过对兰州西固工业区光化学烟雾污染规律与气象条件的关系的研究表明,在高空槽后的低空弱高压控制下,西固区出现高的臭氧浓度值,此时大气层结稳定,风很小,天气晴朗,但中午有浓重烟雾,臭氧浓度峰值在中午出现。该区盆地内形成的光化学烟雾烟团水平面积达几十公里,臭氧浓度的日变化取决于太阳总辐射和大气边界层的日变化。