丙烯腈含量的测定改进

总结了常用测定丙烯腈原料含量方法存在的不足，提出了以１００减去水分和有机杂质的方法来确定丙烯腈含量。并对瓣老测定方法进行对比验证，结果表明，改进的方法操作简单，数据准确，可行。     

国内氰化物测定法近况

阐述了近几年来国内氰化物的测定方法。方法包括:色谱法、光谱法、电化学法及其他方法。     

海水中氰化物测定方法探讨

对应用异烟酸 吡唑啉酮分光光度法测定海水中氰化物的方法进行了补充和改进,提高了海水氰化物测定方法的精密度和准确度。     

用多硫化物同时去除高浓度含氰电镀废水中氰和重金属的研究

研究表明,用多硫化物处理高浓度含氰电镀废水的同时,亦可有效地去除废水中的重金属,其方法操作简便。本文对实际应用中所需的工艺条件、反应产物硫氰化物的去向、残余多硫化物的处理、多硫化物的合成、反应热效应等进行了研究,取得了满意的结果。     

总氰化物测定条件的影响分析

通过对8种情况的对比分析,确定影响总氰化物显色的因素,讨论了有效保证分析结果准确可靠的方法.     

Kinetic-spectrophotometric determination of free cyanide by stopped-flow reversed flow injection analysis

A stopped-flow reversed flow injection method for the determination of free cyanide is proposed. Pyridine-barbituric acid mixture is injected in the flow system as reagent to form the colour species with cyanide. The flow is stopped when the reagent zone comes in the flow cell, where absorbance-time data are collected at 580nm wavelength. The linear range of the determination is 0.1 -10μg/ml CN-. The sampling rate is 60h-1 and the relative standard deviation is 1.6% (n=16) at 5.0 μg/ml CN-1 level. With satisfactory results, the proposed method was applied to the determination of free cyanide in wastewater without sample pretreatment.     

Metal loaded zeolite adsorbents for hydrogen cyanide removal

Metal(Cu,Co,or Zn) loaded ZSM-5 and Y zeolite adsorbents were prepared for the adsorption of hydrogen cyanide(HCN) toxic gas.The results showed that the HCN breakthrough capacity was enhanced significantly when zeolites were loaded with Cu.The physical and chemical properties of the adsorbents that influence the HCN adsorption capacity were analyzed.The maximal HCN breakthrough capacities were about the same for both zeolites at 2.2 mol of HCN/mol of Cu.The Cu2p XPS spectra showed that the possible species present were Cu2O and CuO.The N1s XPS data and FT-IR spectra indicated that CNwould be formed in the presence of Cu+/Cu2+ and oxygen gas,and the reaction product could be adsorbed onto Cu/ZSM-5 zeolite more easily than HCN.     

铜氰溶液的电子束辐照降解

研究了铜氰溶液中总氰初始浓度、pH、铜浓度等对总氰降解效率的影响,比较了KCN溶液和铜氰溶液的总氰降解率,初步推断了铜氰溶液在辐照过程中的降解机制.实验结果表明,在同样的辐照剂量下,随着总氰初始浓度的增加,总氰降解率降低,相应的总氰降解G值增大;铜浓度越低,总氰降解率越高;pH越小的铜氰溶液总氰降解率越高.电子束辐照KCN溶液和铜氰溶液的总氰降解反应属于表观一级反应.在相同的辐照剂量下,KCN溶液的总氰降解率比铜氰溶液要高得多.铜氰溶液的电子束辐照降解过程非常复杂,主要是铜氰络合离子逐步离解出的CN-与·OH的反应.     

CN-测定中显色剂配制方法的选择与保存时间

对2种氰化物显色剂配制方法进行了对比,发现用无水乙醇配制的显色剂具有方便,经济,实用,无毒且显色剂保存期长等优势。     

Gold Mining: Is It Worth Its Weight?

Gold (Au) accounts for only 0.004 g/ton of the earth's crust and is the most desired element. With an average annual world production of approximately 2,500 tons, the current methods of Au mining in developing countries cause major environmental issues. These issues vary from deforestation to cyanide and mercury (Hg) contamination. This article presents several cases of environmental catastrophes caused by Au mining in different regions of the world (Africa, the Middle East, Eastern Europe, and South America). It discusses the currently available processes for the large-scale extraction of metallic Au grains and supports the need for an alternative sustainable process.