Evolution of environmental impact assessment as applied to watershed modification projects in Canada

This article reviews the application of environmental impact assessment (EIA) procedures and practices to three watershed modification projects situaled in western Canada. These ventures were justified for accelerating regional economic development, and cover the period during which public concerns for protecting the environment rapidly made their way into the national political agenda. An historical account and analysis of the situation, therefore, seems desirable in order to understand the development of EIA processes, practices, and methodologies since the start of construction of the first project in 1961. This study concludes that there has been good progress in predicting and evaluating environmental and related social impacts of watershed modification proposals. However, a number of obstacles need to be overcome before EIA can firmly establish itself as an effective planning tool. These difficulties include jurisdictional confusions and conflicts, division of authority and responsibility in designing and implementing appropriate mitigative and monitoring measures, lack of tested EIA methodologies, and limited availability of qualified human resources. A number of conclusions and suggestions are offered so that future watershed modification proposals may be planned and implemented in a more environmentally sustainable fashion. These include: (1) EIA processes must be completed before irrevocable decisions are made. (2) Any major intrusion into a watershed is likely to impact on some major components of the ecosystem(s). (3) Mitigation costs must form part of the benefit-cost analysis of any project proposal. (4) Interjurisdictional cooperation is imperative where watersheds cross political boundaries. (5) The EIA process is a public process, hence public concerns must be dealt with fairly. (6) The role of science in the EIA process must be at arms length from project proponents and regulators, and allowed to function in the interest of the protection of the environment and public health and safety. The views expressed here are the authors’ own and do not necessarily reflect those of FEARO and/or other government agencies and officials involved in the review of these projects.     

哈尔滨市秸秆焚烧大气污染负荷估算方法研究

本文针对近些年哈尔滨秋末冬初大气污染程度增加的溯源问题,基于静风污染气象及降雪对秸秆焚烧的影响等基本假设,采用箱式模型和优化拟合的方法对秸秆焚烧产生污染物的源强及其负荷进行了估算.通过对2015年和2017年典型时段数据的优化拟合得到降雪前重污染天气下PM₁₀排放源强分别为20.16、21.83 μg·m^-2·s^-1,CO的排放源强分别为149.32、138.65 mg·m^-2·s^-1;降雪后重污染天气下PM₁₀排放源强分别为15.98、7.09 μg·m^-2·s^-1,CO的排放源强分别为122.91、89.21 mg·m^-2·s^-1.由降雪前后各污染物的源强差得到2015年和2017年秸秆焚烧产生的PM₁₀的排放源强分别为4.18、14.74 μg·m^-2·s^-1,负荷分别为20.73%、67.52%;CO的排放源强分别为26.41、49.44 mg·m^-2·s^-1,负荷分别为17.69%、35.66%.本文为相关清单的研究提供了一种客观的校核方法,具有重要的社会、环境及现实意义.     

导流明沟人工湿地治理橡胶废水实践

运用人工湿地原理，采用明沟导流治理橡胶生产废水，其工程投资低，占地面积小，运行稳定，易于管理，去除率高，处理后废水达到国家标准。     

滇池环保疏浚工程中的新型土工管袋围埝--国内首次土工管袋围埝生产性试验工程设计

介绍了滇池草海污染底泥疏浚工程中在柳苑堆场进行土工管袋围埝生产性试验工程的设计概况，并在技术，经济，环保等方面与传统的编织袋装土围埝做比较。     

调引太湖水改善苏州市水动力条件研究

基于苏州地区独特的地理位置,简述引水改善该地区水环境的必要性,拟定了3种调水方案,利用感湖河网数学模型,对3种方案调水后主要河道的水动力条件进行预测,分析了各河道调水后的水动力变化趋势,提出了利用太湖水自流引水改善苏州市水环境的最佳方案.     

荆江分洪区1998年洪水转移调查分析

对荆江分洪区１９９８年洪水期间安全转移的调查表明,叶然有分洪预案,但实际转移时仍出现了相当程度的拥挤与混乱。完善分洪转移的组织与管理,已成为分洪区居民１９９８年转移后关注的焦点,分洪区居民普遍表现出对分洪洪水情不甚了解,通过各种方式开展有关洪水的宣伟,提高区内居民的防洪意识,是荆江分洪区未来防洪减灾的重点工作之一,由于是国家为保护更重要的地区而主动分洪。对分洪区历分洪蒙受的损失给预某种形式的补偿已     

钱塘江引水降氮示范工程的构建和运行研究

针对杭州西湖钱塘江引水低碳高氮的特点,提出以改性水草塘—复合垂直流人工湿地(IVCW)相耦合的生物—生态工艺进行引水处理,对该引水降氮示范工程的构建和运行效果进行了跟踪研究。结果表明,整个稳定运行期间(2012年7月19日至11月19日),耦合工艺对COD、TN、硝酸盐氮、TP的平均去除率分别为52.27%、52.49%、53.69%、52.79%,系统出水满足《地表水环境质量标准》(GB 3838—2002)Ⅳ标准;改性水草塘和IVCW单元作为耦合工艺的两个重要组成部分,在脱氮、除磷方面优势互补,从而共同保证出水水质的稳定;在改性水草塘单元,温度与COD的去除效果呈负相关关系,进水C/N与TN去除效果呈正相关关系;而在IVCW单元,温度与COD、TN的去除效果均呈线性正相关关系,进水C/N与两者的去除效果也呈正相关关系,且对COD的影响要大于对TN的影响。     

新疆油田抽汲排液污染控制研究

抽汲排液存在抽汲设备和工具密封性差,对井场环境污染比较严重的问题,为解决抽汲排液对井场造成的污染,分别对抽汲钢丝绳的选择、试油井口防喷盒的密封以及试油抽汲作业规程及其它方面作了研究和应用,使抽汲排液对井场造成的污染得到了较好控制,符合新疆油田创建"绿色油气田"的要求。     

Self-inhibition can limit biologically enhanced TCE dissolution from a TCE DNAPL

Biodegradation of trichloroethene (TCE) near a Dense Non Aqueous Phase Liquid (DNAPL) can enhance the dissolution rate of the DNAPL by increasing the concentration gradient at the DNAPL-water interface. Two-dimensional flow-through sand boxes containing a TCE DNAPL and inoculated with a TCE dechlorinating consortium were set up to measure this bio-enhanced dissolution under anaerobic conditions. The total mass of TCE and daughter products in the effluent of the biotic boxes was 3-6 fold larger than in the effluent of the abiotic box. However, the mass of daughter products only accounted for 19-55% of the total mass of chlorinated compounds in the effluent, suggesting that bio-enhanced dissolution factors were maximally 1.3-2.2. The enhanced dissolution most likely primarily resulted from variable DNAPL distribution rather than biodegradation. Specific dechlorination rates previously determined in a stirred liquid medium were used in a reactive transport model to identify the rate limiting factors. The model adequately simulated the overall TCE degradation when predicted resident microbial numbers approached observed values and indicated an enhancement factor for TCE dissolution of 1.01. The model shows that dechlorination of TCE in the 2D box was limited due to the short residence time and the self-inhibition of the TCE degradation. A parameter sensitivity analysis predicts that the bio-enhanced dissolution factor for this TCE source zone can only exceed a value of 2 if the TCE self-inhibition is drastically reduced (when a TCE tolerant dehalogenating community is present) or if the DNAPL is located in a low-permeable layer with a small Darcy velocity.     

引水放流方式对太湖贡湖示范区水质的影响

基于国家水专项太湖贡湖湾示范区水质水量调控的需求,构建了示范区的等比例缩放实体模型。通过研究模型中4种不同调水方案的效果,为示范区调水技术的比较与选择提供决策依据。研究中,通过测定模型中5个断面的流场数据,判断引水方式对模型流场的影响,以此评价不同调水方案效果。同时以墨汁作为示踪剂,通过不同引水放流方式下示踪剂的扩散场变化,验证不同断面流速测定对整个区域流场判断的准确性,从而分析引水放流方式对水质的影响。