A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

Treatability studies of naphthalene in soil,water and air with persulfate activated by iron(Ⅱ)

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO₄], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO₄] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.     

表面活性剂增强修复地下水中PCE的砂箱实验及模拟

在石英砂充填的二维砂箱中开展表面活性剂（Tween 80）冲洗四氯乙烯（PCE）的修复实验,基于图像分析技术监测不同污染源区结构条件下NAPL相的去除过程.由于实验条件限制,实验中缺乏溶解相浓度数据.为此进一步基于UTCHEM数值模拟方法来理解NAPL相和溶解态之间的质量传输过程,并探讨表面活性剂浓度、注入速率等因素对修复效率的影响.综合砂箱实验和数值模拟结果表明：介质均质和非均质条件下会形成不同类型DNAPL污染源区结构,表现为离散状PCE与池状PCE体积比（GTP）差异.由于离散状污染物与表面活性剂的接触面积更大,更易被优先去除;初始GTP值越高,污染物的修复速率和修复效率也越高.增大表面活性剂浓度或提高表面活性剂的注入速率,虽然能提高DNAPL的修复速率,但会明显降低表面活性剂的修复效率,实验过程中修复效率降幅可达93%.线性驱动溶解模型可以有效地模拟表面活性剂修复DNAPLs过程,基于数值模拟方法选择合适的表面活性剂配比可有效的节省实际污染场址修复经费和时间成本.     

贵阳地区基本地质环境和主要岩土工程问题综述

本文系笔者对贵阳地区主要地质环境和工程地质特点进行的初步总结,内容为贵阳地区主要岩土构成情况、分布范围及与之相应的岩土工程地质特点和主要的岩土工程地质问题的描述,旨在给同行提供宏观性的了解和方向性的参考。     

地震安全性评价工作在城市建设中的重要作用

地震安全性评价工作在城市建设中起着非常重要的作用,为工程抗震提供精确的设计依据,提供科学合理的地震动参数,提出科学合理的设防要求,能够在一定程度上避免破坏性地震造成的损失,从而达到有效减灾的目的。     

A profile of environmental science in China

This paper concisely introduced the eco-environmental survey in China and the Chinese scientific programme for environmental research which is being practiced or being planned. China has established a nation-wide system relating to environmental scientific research and environmental administration and has taken the following strategies for solving the environment problems: (1) a series of laws and regulations for environmental protection has been promulgated so as to strengthen the legal administration and economic punishment. (2) the idea of ecological construction has been proposed for the purpose of taking the environmental protection work into the consideration of the national and provincial (or regional) economic construction planning. (3) spreading ecological engineering and ecological technologies have reduced the pollutant sources and have increased the industrial and agricultural economic profit.     

A regional environmental management information system for Chinese EPA—the system analysis and design

REMIS is one of key research projects sponsored by the central government. It is recommended to regional EPAs as a main tool of the environmental management. REMIS simulates the functions of the regional EPAs and aimed to improve their management level. The national environmental management information system will base on REMIS.Functional analysis is the kernel of the REMIS system analysis. Data and data flow analysis are used to support the functional analysis.Investigations on the functions of the local EPAs of eight provinces and 12 cities have been taken. The functions were carefully sorted. Modular design method was used in system analysis and system design.The system analysis included functional analysis, data analysis and data flow analysis. The system design is based on the system analysis. HIPO diagram of each modular, data base structure, menu design, selection of hardware and software environment were the main items of the system design.     

辽宁省白石水库环境工程地质问题综述

白石水库位于辽宁省北票市上园乡附近的大凌河干流上,是大凌河流域第一期开发的控制性骨干工程，水库建成后，将产生许多环境工程地质问题。从库坝区的地质背景出发，对水库渗漏、库岸再造与泥沙淤积、淹没与浸没、水库诱发地震、坝下冲刷坑稳定性等主要环境工程地质问题进行了综合评述。     

高浓印染废水处理工程的设计审计与运行结果分析

通过对漂染厂生产工艺过程及排废状况进行审计研究，提出了有针对性的废水处理工艺流程，区别对待废水浓度、污染物成分、化学作用及其工艺原理，实现了废水处理各工艺段的适配与综合节能的协调，在保证废水高效达标处理的前提下使工程优化     

土壤对六价铬的还原容量初步研究

提出并讨论了土壤的潜在还原容量、有效还原容量和条件还原容量等概念，通过对采用北京和唐山地下水饮用水源区３个包气带土壤样品的土柱淋滤实验，研究了土壤对水溶液中六价铬的还原作用，研究了上述土壤各种还原容量之间的关系及影响因素，探讨了向土壤中投加适量常见，无毒，价廉的还原性物质以提高土壤还原能力的方法和将其应用于去除灌溉用污染地下水中六价铬的可能性，实验结果表明，在正常环境条件下，土壤的有效还原容量比土