Characterization of coffee residues pellets and their performance in a residential combustor

Spent coffee grounds (SCG) and coffee husks (CH) were evaluated as biofuels, after densification, for energy production. CH represent a specific problem for the coffee industry due to a low calorific value, high ash content, and a very low bulk density. Hence, the energetic potential of SCG (95 wt%)/CH (5 wt%) blend and pure SCG (100%) were examined. The blend of SCG and CH was limited to 5 wt% of CH because of the low bulk density of CH. Therefore, physicochemical and energetic characterizations of the produced pellets were performed. Thermogravimetric analyses were performed under nitrogen and air atmospheres to evaluate the CH behavior in the blend. Characterization study shows that both produced pellets could reach the French Agropellets standard (AQI). Thermal degradation showed that the mean reactivity of the SCG/HC pellets was higher than pure SCG. Then, combustion experiments were performed in a domestic combustor, after modification of the boiler power in order to improve its energetic performances. The presence of CH led to a rise of CO, NOx, VOC’s, and particle emissions. Nevertheless, the performances of the biofuels are almost in agreement the NF EN 12809 standard.     

基于BDPs的多级土壤渗滤系统处理受污染河水的试验研究

针对受污染的流入滇池的河流河水,采用具有曝气段和缺氧段的两段式多级土壤渗滤(multi-soil-layering,MSL)系统,开展了在缺氧段添加非水溶性可生物降解多聚物(BDPs)材料PBS颗粒的强化脱氮除磷研究.结果表明,添加PBS碳源可有效解决传统MSL系统因碳源不足而导致的脱氮效果不理想的问题.在河水污染较轻及较重两种情况下,系统对TN的平均去除率分别达到78%、85%,平均单位表面去除负荷分别为9.09g·m-·2d-1、24.55g·m-·2d-1;TP平均去除率分别达到92%、98%,平均单位表面去除负荷分别为0.76g·m-·2d-1、2.02g·m-·2d-1.此外,系统对COD的平均去除率可达到75%以上.     

生物膜法降解甲苯废气过程的探讨

采用陶粒为填料的生物滤池降解甲苯废气，并对清水试验和生物膜试验的结果进行分析，发现生物膜法降解甲苯这样的挥发性有机物（VOCs)具有良好的效果，已不再是清水试验中单纯的物理吸收过程，而是伴有生化反应的吸收过程，是以气膜控制为主的传质过程。     

Experimental study on the competing effect of ceramic pellets on premixed methane-air flame propagation in a duct

It is urgent to explore effective suppression methods for gas fires and explosions to ensure the safe utilizations of combustible gases in industrial processes. In this work, experiments are performed to study the effect of spherical ceramic pellets on premixed methane-air flame propagation in a closed duct. High-speed schlieren photography and pressure transducers are used to record the flame propagation and pressure transient, respectively. Behaviors of the flame propagating through a section of the duct filled with ceramic pellets in mixtures at different equivalence ratios are scrutinized. Three different diameters of pellets are considered in the experiments. The result shows that the flame can be quenched in the case with a smaller pellet diameter (3 mm) for a wide range of equivalence ratios from fuel-lean to fuel-rich mixture. For larger pellet diameter (5 or 10 mm), flame extinction occurs in fuel-rich mixtures (e.g. Φ = 1.1, 1.2). For the cases of flame surviving through the pellets bed, the pellets show a significant influence on the flame structure and behavior. The flame propagation depends on the porosity and the mean void diameter of the porous media in the pellets bed. Small void diameter is beneficial to flame quenching, while large porosity can accelerate the flame propagation. The pressure dynamics evolution is closely related to the interaction of flame with the pellets, and it depends on whether the flame quenches in the pellets bed. Overall, d = 3 mm ceramic pellets display the best suppression effect on flame propagation and pressure buildup in this study. The results of this study are of great significance to guide the safety design of spherical suppression materials in engineering applications for process safety researchers and engineers.     

黄孢原毛平革菌对印染废水脱色条件研究

根据黄孢原毛平革菌的生长和代谢特点,设计了不同废水浓度、不同菌龄、不同温度、不同转速和不同pH值条件,研究黄孢原毛平革菌对工业印染废水的脱色效果.研究表明,印染废水最佳稀释倍数为8倍,脱色用菌丝球最佳接种菌龄为3d,脱色适宜温度为38℃,摇床转速为150～180r/min,脱色初始pH值为3.4～4.6.     

Removal of humic substances by biosorption

Fungal pellets of Aspergillus niger 405,Aspergillus ustus 326,and Stachybotrys sp.1103 were used for the removal of humic substances from aqueous solutions.Batchwise biosorption,carried out at pH 6 and 25°C,was monitored spectrophotometrically and the process described with Freundlich’s model.Calculated sorption coeffcients Kf and n showed that A.niger exhibited the highest effciency.A good match between the model and experimental data and a high correlation coeffcient(R2)pointed out to judicious choice of ...     

Biosorption of lead by Phanerochaete chrysosporium in the form of pellets

The growth of Phanerochaete chrysosporium(ATCC 24725) in pellets was influenced by culture time,medium pH,C/N,surfactant concentration,spore number in inoculum,and shaking rate.The removal of Pb^2 from aqueous solution by this kind of mycelial pellets was studied.The results indicated that many factors affected biosorption.These factors included pH,Pb^2 concentration,co-ion,adsorption time, and chemical pretreatments of biomass.Under optimum biosorption conditions(pH4.5,27℃,16h),the highest lead uptake of 108 mg/g,was observed with mycelial pellets of 1.5-1.7 mm in diameter which were treated with 0.1 mol/L NaOH solution before adsorption.Pretreatment of biomass with NaOH further increased its biosorption capacity.     

Forest carbon accounting methods and the consequences of forest bioenergy for national greenhouse gas emissions inventories

While bioenergy plays a key role in strategies for increasing renewable energy deployment, studies assessing greenhouse gas (GHG) emissions from forest bioenergy systems have identified a potential trade-off of the system with forest carbon stocks. Of particular importance to national GHG inventories is how trade-offs between forest carbon stocks and bioenergy production are accounted for within the Agriculture, Forestry and Other Land Use (AFOLU) sector under current and future international climate change mitigation agreements. Through a case study of electricity produced using wood pellets from harvested forest stands in Ontario, Canada, this study assesses the implications of forest carbon accounting approaches on net emissions attributable to pellets produced for domestic use or export. Particular emphasis is placed on the forest management reference level (FMRL) method, as it will be employed by most Annex I nations in the next Kyoto Protocol Commitment Period. While bioenergy production is found to reduce forest carbon sequestration, under the FMRL approach this trade-off may not be accounted for and thus not incur an accountable AFOLU-related emission, provided that total forest harvest remains at or below that defined under the FMRL baseline. In contrast, accounting for forest carbon trade-offs associated with harvest for bioenergy results in an increase in net GHG emissions (AFOLU and life cycle emissions) lasting 37 or 90 years (if displacing coal or natural gas combined cycle generation, respectively). AFOLU emissions calculated using the Gross-Net approach are dominated by legacy effects of past management and natural disturbance, indicating near-term net forest carbon increase but longer-term reduction in forest carbon stocks. Export of wood pellets to EU markets does not greatly affect the total life cycle GHG emissions of wood pellets. However, pellet exporting countries risk creating a considerable GHG emissions burden, as they are responsible for AFOLU and bioenergy production emissions but do not receive credit for pellets displacing fossil fuel-related GHG emissions. Countries producing bioenergy from forest biomass, whether for domestic use or for export, should carefully consider potential implications of alternate forest carbon accounting methods to ensure that potential bioenergy pathways can contribute to GHG emissions reduction targets.     

Photocatalytic Production of Methane and Hydrogen Through Reduction of Carbon Dioxide with Water Using Titania Pellets

This paper presents an experimental study on employing a pellet form of catalyst in photo-reduction of carbon dioxide with water. Water was first absorbed into titania pellets. Highly purified carbon dioxide gas was then discharged into a reactor containing the wet pellets, which were then illuminated continuously for 65 hours using UVC lamps. Analysing the products accumulated in the reactor confirmed that methane and hydrogen were produced through photo-reduction of carbon dioxide with water. No other hydrocarbons were detected. Increasing the temperature in the reactor has showed little change on the amount of methane produced.     

H₂-rich syngas production by fluidized bed gasification of biomass and plastic fuel

This paper reports the results of gasification tests using a catalytic fluidized bed gasifier to obtain a H₂-rich stream by feeding different pellets made of wood, biomass/plastic and olive husks to the gasifier. The effects of both the steam supply and an in-bed catalyst on gasifier performance have been investigated. In general, pelletization was an effective pre-treatment for improving the homogeneity of the fuel and the reliability of the feeding devices. The use of biomass/plastic pellets in a catalyst bed yielded good results in terms of the hydrogen concentration (up to 32% vol.), even if an increase in tar production and in the fine/carbon elutriation rate was observed in comparison with wood pellets.