电化学微传感器检测水中痕量铜离子

为改善微电极在阳极溶出伏安法检测重金属离子过程中低电流响应和低电催化能力的缺点,提出了一种在碳纤维微电极表面合成还原氧化石墨烯/纳米金材料制得还原氧化石墨烯纳米金修饰碳纤维微电极（rGO/AuNPs CFMEs）的方法.通过SEM表征,所制备的rGO/AuNPs CFMEs具有比表面积高、吸附能力强和催化活性好的特点,因此改性微电极适合作为方波阳极溶出伏安法（SWASV）测定水中铜离子（Cu²⁺）的工作电极.在构建微传感器测试水中痕量铜离子系统后,对pH值、电导率、富集时间和富集电位等检测条件进行了优化.在pH值为4,电导率为36.1S/m,富集时间为360s,富集电位为-1.2V的最佳条件下,铜的线性范围和检出限分别0~1.0μmol/L和2.4nmol/L.此外,微传感器的可重复性、长期稳定性以及选择性也得到了验证.     

人工神经网络用于铅的化学形态模拟计算

用前馈线性网络法求解水体系中Ｐｂ（２＋）与ＯＨ－之间的反应常数，不同训练算法对求解结果的精度、收敛速度及权值均有影响．结果表明，批处理算法的精度最好，权值不出现负值，但运算时间最长；在线算法的精度虽不如批处理算法，而比数据变换－在线算法好，权值有时会出现负值．运算时间较长；数据变换－在线算法的优点是运算时间短，但相对误差较大，权值出现负值的机会多。采用反馈网络模拟计算铅的各种化学形态的浓度．用物料核算的方法对反馈网络模型进行检验表明，此种模型用于平衡计算是可行的，详细分析了理论模拟和实验曲线的差异的原因，温度的影响最小，在４＜ｐＨ＜９时，ＣＯ有重要的影响．在国代检验时，ｎ值取整所引入的误差的影响亦不可忽视。从本文的结果可以看到，采用前馈网络和反馈网络相结合的方法考察水体中的化学形态是可行的．从而为解决这一类问题提供了一种可能的途径．     

石油亚砜萃取巯基醋酸的研究

对石油亚砜(PSO)萃取巯基醋酸的条件和影响进行了实验研究,确定了石油亚砜通过氢键和巯基醋酸形成的萃合物的组成.为从废水中回收巯基醋酸以及石油硫醚的综合利用提供了依据.     

脱氮-混凝气浮-UASB-接触氧化法处理垃圾填埋渗滤液

采用脱氮—混凝气浮—UASB—接触氧化工艺处理高氨氮、高浊度的垃圾渗滤液，使处理后出水的各项指标完全达到国家《污水综合排放标准》(GB8978—1996)二级新扩改标准。对废水处理系统的工艺作了简单介绍，并对系统的调试、运行过程进行了技术总结。     

Concentrations of disinfection by-products in swimming pool following modifications of the water treatment process: An exploratory study

The formation and concentration of disinfection by-products (DBPs) in pool water and the ambient air vary according to the type of water treatment process used. This exploratory study was aimed at investigating the short-term impact of modifications of the water treatment process on traditional DBP levels (e.g., trihalomethanes (THMs), chloramines) and emerging DBPs (e.g., Halonitromethanes, Haloketones, NDMA) in swimming pool water and/or air. A sampling program was carried to understand the impact of the following changes made successively to the standard water treatment process: activation of ultraviolet (UV) photoreactor, halt of air stripping with continuation of air extraction from the buffer tank, halt of air stripping and suppression of air extraction from the buffer tank, suppression of the polyaluminium silicate sulfate (PASS) coagulant. UV caused a high increase of Halonitromethanes (8.4 fold), Haloketones (2.1 fold), and THMs in the water (1.7 fold) and, of THMs in the air (1.6 fold) and contributed to reducing the level of chloramines in the air (1.6 fold) and NDMA in the water (2.1 fold). The results highlight the positive impact of air stripping in reducing volatile contaminants. The PASS did not change the presence of DBPs, except for the THMs, which decrease slightly with the use of this coagulant. This study shows that modifications affecting the water treatment process can rapidly produce important and variable impacts on DBP levels in water and air and suggests that implementation of any water treatment process to reduce DBP levels should take into account the specific context of each swimming pool.     

酸性水汽提及硫磺回收工艺的研究及应用研究

文章主要通过对酸性水气体及硫磺回收工艺特点的介绍与比选,着重分析“无在线炉硫磺回收及尾气处理工艺”（SSR）,其中硫回收为一段高温转化,二级催化转化的克劳斯工艺,尾气处理为加氢还原一吸收工艺,并介绍原辅材料成分及处理效率。该工艺能够有效解决石化企业的酸性气及酸水排放问题,具有良好的社会、环境效益显著。     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

UASB-FEO-氨吹脱-CASS工艺在垃圾渗滤液处理中的应用

针对垃圾渗滤液可生化性差、氨氮含量高等特点和国内处理工艺现状,采用UASB-FEO-氨吹脱-CASS工艺处理合肥市龙泉山城市垃圾填埋场垃圾渗滤液。介绍了工艺的重要构筑物及其设计参数。运行实践表明,整套装置运行平稳,出水水质满足设计要求。根据出水水质对该工艺进行技术分析以及运行结果的讨论,并与新发布的技术规范及排放标准进行对比分析。     

超声吹脱去除氨氮的机理和动力学研究

采用超声吹脱技术对某印染厂印染废水中的氨氮进行了处理实验,探索了其反应机理并进行了动力学研究。研究表明,叔丁醇的存在没有降低废水中氨氮的去除率,证明.OH不是超声吹脱去除氨氮反应中的主导氧化物种。通过对反应产物的分析发现,超声吹脱去除氨氮的机理主要是氨氮以游离态的方式在空化效应下高温高压热解成氮气和氢气排出,同时氨气在空化效应产生的超临界状态下传质速度加快,在吹脱条件下更易于从废水中散失。动力学分析表明,印染废水中氨氮的超声去除反应属于一级反应,符合一级反应动力学。     

基于方波溶出伏安法的电化学传感器检测水体中痕量铅

基于方波溶出伏安法运用丝网印刷电极探索了一种利用电化学传感器检测水样中痕量铅的方法.得到了该检测方法的最佳参数:方波频率30 Hz,振幅80 mV,电位增量5 mV;0.5 mol/L的支持电解质(KCl);沉积电位-1.1 V,沉积时间400 s.在该优化条件下,在浓度为25 ～ 500μg/L范围内溶出峰电流与铅离子浓度呈良好的线性关系(R2=0.9945).对于几种其他金属离子的干扰实验结果表明,Mn2的存在严重抑制铅离子的峰电流.