排序方式: 共有38条查询结果,搜索用时 31 毫秒
1.
2.
为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果,以除尘效率和系统阻力为参照,选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计,在特定参数条件下,2种喷雾方式的因素影响排序相同,除尘效率为纤维栅数>纤维丝间隙>喉管气速>喷雾量;系统阻力为喉管气速>纤维栅数>纤维丝间隙>喷雾量;径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板;轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板;在最优配置下的除尘性能为径向外喷>轴向喷雾。 相似文献
3.
4.
G. Suresh H. C. Kamath Mallikarjun Bhovi 《International Journal of Sustainable Engineering》2016,9(3):206-214
Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al2O3) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation. 相似文献
5.
6.
针对提钒炼钢厂建设于20世纪70年代初的1号—3号转炉实施煤气回收的可能性进行了论证,对影响煤气回收的问题提出了相应的完善措施,在此基础上成功实施了1号—3号转炉煤气回收改造,改进后年回收转炉煤气达2 127 138GJ以上,可发电59 124 kW.h,减少CO2排放量近20万t,对降低生产能耗及减少温室气体排放起到了较好作用。 相似文献
7.
8.
应用文献中计算压降的公式,得出压降随喉管长度变化的关系;应用WilliamLicht效率公式,得出效率及效率、压降比随喉管长度和喉管气速的变化关系。根据这些关系,得出了在给定效率下压降最小时相应的喉管直径和管长的最佳组合。该结果对于优化文丘里除尘器喉管结构设计、降低能耗和运行成本具有重要意义。 相似文献
9.
借助非平衡级模型设计了文丘里填料脱硫塔,并进行了实验验证和分析。实验验证结果显示:设计的文丘里填料脱硫塔,在pH>6、L/G>5的情况下,脱硫效率可以达到72.9%以上;经过调优,在pH值为7、液气比为7.33的情况下,吸收塔脱硫效率最高达95.5%。研究结果证实,与目前的主要中小型脱硫工艺相比,该工艺在正常运行状态下,可以维持较高的脱硫效率,具有一定的工业推广意义。同时,提供的研究方法对文丘里填料脱硫塔的工业设计具有一定的指导作用。 相似文献
10.