供水管网生物膜有机物的二氯乙腈与二氯乙酰胺生成特性

在饮用水输配系统中,来源于管壁生物膜的有机物可能耗氯并生成消毒副产物(DBPs),包括二氯乙腈(DCAN)与二氯乙酰胺(DCAcAm)等高毒性含氮DBPs(N-DBPs).研究考察管网常见的细菌与其胞外聚合物(EPS)以及模拟管壁生物膜氯化与氯胺化后DCAN与DCAcAm的生成,并与天然有机物(NOM)和水源水有机物进行比较.结果显示,铜绿假单胞菌、恶臭假单胞菌与藤黄微球菌与氯反应生成的DCAN、DCAcAm浓度分别为1.48～2.02、0.21～0.38μg·mg~(-1)(mg~(-1)以TOC计),高于同反应条件下NOM的生成量;相比于氯化反应,3株细菌细胞氯胺化生成的DCAN与DCAcAm浓度明显更低.3株菌的EPS也是氯与氯胺化反应生成DCAN与DCAcAm的前体物,且其氯胺化反应生成的DCAcAm浓度高于氯化反应生成的.与NOM、水源水相比,模拟管壁生物膜氯化后生成的N-DBPs与三氯甲烷(TCM)浓度比更高,表明生物膜有机物比NOM与水源水有机物更倾向生成DCAN与DCAcAm类N-DBPs,且模拟管壁生物膜氯胺化的DCAcAm生成量高于氯化反应的,说明管壁生物膜有机物是供水管网系统中DCAN与DCAcAm类N-DBPs的重要前体物.     

温度和含水率对村镇垃圾焚烧烟气中有机物排放的影响

使用管式炉模拟村镇生活垃圾焚烧过程,研究不同焚烧温度和不同垃圾含水率条件下,村镇垃圾焚烧烟气中多环芳烃（PAHs）、氯苯及苯系物的生成和分布特性.结果表明,焚烧温度为550℃时,烟气中多环芳烃和氯苯的释放量最大,当温度小于550℃时,多环芳烃和氯苯的释放量随温度升高而增加,温度大于550℃时,多环芳烃和氯苯的释放量随温度升高而降低.高温焚烧不仅可以抑制烟气中多环芳烃的浓度及减少大分子量PAHs的排放,还能降低氯苯的释放量和氯代数,从而减小村镇垃圾焚烧烟气中的毒性;苯系物随着温度升高,由热解转变为高温合成,释放量也随着增加.水分对多环芳烃和氯苯有较大影响,对苯系物的影响较小.在400℃条件焚烧时,水分含量对多环芳烃总体上是促进的,而在850℃焚烧条件下则表现出抑制作用;而水分对氯苯则均表现出抑制作用,并且可以降低氯苯化合物的氯代数.     

松花江氯苯类有机污染物的水质标准制定

松花江具有冰封期较长,江水中有机毒物难降解、迁移距离长等环境特点.为了控制污染、保护生态环境、维护生态安全、结合松花江特点,研究并制定了松花江氯苯类有机污染物水质标准.本标准已列为地方标准(GB23/T901-2005).     

4-氯苯酚在水溶液中的光化学反应(Ⅰ)单线态氧和自由基的产生

在模拟太阳光照射下，４氯苯酚（４ＣＰ）浓度迅速降低，反应过程对应着产生大量的单线态氧和自由基．金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋能够加速这一过程，尤以Ｆｅ２＋、Ｆｅ３＋的影响更明显；在模拟太阳光照射下，向４ＣＰ体系加入的富里酸（ＦＡ），对４ＣＰ浓度降低略起抑制作用，这表明二者之间存在相互作用．但当再加入金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋后，能够加速４ＣＰ浓度降低，尤以Ｆｅ２＋、Ｆｅ３＋的影响更显著．     

Sensitized effect of β-cyclodextrin on the fluorescence in the determination of carbaryl

Based on the significant enhancement of fluorescence intensity of carbaryl in inclusion complex, a spetrofluorimetdc method with high sensitivity was developed for the determination of carbaryl in aqueous solution. Under the optimum conditions, the complex had excitation and emission maxima at 278 nm and 332 nm, respectively. The linear range of the method was 7.0 ng/ml-1500 ng/ml with a detection limit of 1.2 ng/ml. The proposed method was successfully used to determine quantitativelv of carbarvl in cottonseeds.     

活性炭纤维填充床脱除工业废水中氯苯酚的实践

采用了活性炭纤维吸附法净化水中微量的氯苯酚。在25℃和35℃下，实验测定活性炭纤维吸附氯苯酚的吸附平衡等温线．该吸附等温线符合Langmuir型。水溶液的pH值将影响吸附容量。在碱性条件下吸附容量显著下降。这将有利于吸附剂的再生。测量氯苯酚在活性炭纤维填充床的穿透曲线．在5％突破点处的动态吸附容量为0．23kg(氯苯酚)／kg(活性炭纤维)在25℃下。采用40℃、5％NaOH溶液再生被氯苯酚饱和的活性炭纤维填充床。再生后吸附效率达93％以上。     

4-氯苯酚在水溶液中的光化学反应(Ⅱ)反应的动力学研究

研究了在模拟太阳光和紫外光作用下，４－氯苯酚的光反应动力学，研究表明，紫外光的作用更为显。４－ＣＰ的反应速率与４－ＣＰ起始浓度、ｐＨ值，金属离子浓度、富里酸浓度等因素有关，通入空气，能够加速４－ＣＰ降解。     

2-Chlorophenol oxidation kinetic by photo-assisted Fenton process

Experimental data are presented to test and validate a kinetic model for the oxidation of 2-chlorophenol wastewater by photo-assisted Fenton process. The data showed that this process had produced good effects under acidic conductions. Up to 90% 2-chlorophenol was removed after 90-minute reaction time with H2O2 of 25% CODCr. in, while in UV/H2O2 system ordy 16.8% 2-chlorophenol was removed after one hour treatment. The optimal pH in this reaction occurred between pH 3.0 and pH 4.0. The reaction kinetics for photo-assisted Fenton process experimented in this research was investigated. Kinetic models were proposed for the treatment of 2-chlorophenol wastewater. The reaction was found to follow the 2nd order. The equations of reaction kinetics are as follows:-d[RH]/dt=KRH[RH][H2O2]0exp(-KH2o2t);-d[CODCr]/dt=KCODCr[CODCr][H2O2]0exp(-K′t).The prediction of the models was found to be in a good agreement with experimental results, thus confimfing the proposed reaction mechanism.