The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

ASE-气相色谱法测定油田区土壤中多种石油烃

采用气相色谱法测定油田区土壤中C_(10)～C_(40)的石油烃,通过优化加速溶剂萃取的条件,使方法在62 mg/L～3 100 mg/L范围内线性良好,方法检出限为4.8 mg/kg。用该方法测定石油区短期、中期、长期油井污染土壤样品,5次测定结果的RSD为1.3%～5.2%,加标回收率为84.8%～98.5%,有证标准样品测定结果在可信区间内。     

气相色谱-质谱法测定沉积物中的有机氯和多氯联苯

采用加速溶剂萃取法提取沉积物中的有机氯和多氯联苯,提取液用凝胶色谱法净化后用气相色谱-质谱法测定。方法在5.00μg/L~200μg/L范围内线性良好,当取样量为10.0 g时,方法检出限为0.03μg/kg~0.37μg/kg,空白样品2个质量比水平的加标回收率为70.8%~121%,测定结果的RSD为2.7%~11.5%。用该方法测定实际样品,结果 12个抽检的沉积物样品中多氯联苯均未检出,9个样品中有机氯检出。     

气相色谱-串联质谱法测定沉积物中多环芳烃

采用ASE法提取沉积物中16种多环芳烃,以固相萃取法净化提取液,用气相色谱-串联质谱法测定。通过优化测定条件,使方法在5.00μg/L~1 600μg/L范围内线性良好,方法检出限为0.15μg/kg~0.66μg/kg。空白石英砂的加标回收率为61.9%~121%,7次测定结果的RSD为2.6%~11.1%。     

镉、汞、铅和石油烃复合污染对渤海湾常见渔业资源生物的影响初探(Effects of the Combined Pollution of Cd, Hg, Pb and Petroleum Hydrocarbons on Common Fishery Species in the Bohai Bay)

通过对1996～2005年渤海湾近岸海域海水镉、汞、铅和石油烃浓度变化的分析,发现海水中镉浓度呈明显上升趋势,汞、铅和石油烃则无明显变化趋势.加速生命试验法模型(Accelerated Life Testing model)的研究显示,1996～2005年渤海湾近岸海域海水镉、汞和铅平均浓度均已超过其对渤海湾常见渔业资源生物的安全浓度.镉、汞、铅和石油烃对生物的长期致死率鱼类分别为4.5%、16.3%、0.0%和12.0%,甲壳类为0.4%、7.9%、0.3%和6.6%,双壳类为10.5%、0.2%、0.2%和2.3%.效应加和模型(Independence Action model)的估算表明,在镉、汞、铅和石油烃组成的复合污染条件下,渤海湾常见鱼类、甲壳类和双壳类的长期死亡率分别为29.7%、14.6%和12.9%,其种群增长率分别降低约6.4%、14.6%和12.9%.与镉、汞、铅和石油烃单种污染物暴露相比,其复合污染导致的渤海湾常见渔业资源生物种群(鱼类、甲壳类和双壳类)增长率的降低更明显.因此,复合污染是导致渤海湾渔业资源衰退的重要因素。     

高效液相色谱法测定土壤中多环芳烃的条件优化

研究了加速溶剂萃取(ASE)、固相萃取柱净化(SPE)、高效液相色谱仪(HPLC)联合测定土壤中16种多环芳烃(PAHs)的分析方法,选择以正己烷/丙酮(1+1,V/V)作为ASE提取溶剂,提取液经SPE硅胶小柱净化,正己烷/二氯甲烷(1+1,V/V)进行洗脱,洗脱体积为10 m L,洗脱液经旋转蒸发浓缩至近干,过0.22μm有机滤膜,用乙腈定容至1 m L,最后用HPLC-紫外检测器对提取液中16种PAHs进行定量分析。土壤中16种PAHs的方法检出限为2.8~4.9μg/kg,加标回收率为81.9%~102%,相对标准偏差为2.5%~6.2%,完全满足土壤中PAHs分析的质量控制要求,该法稳定性好、准确度高、可操作性强,适合于土壤样品中16种PAHs的准确测定。     

ASE萃取-SPE净化-气相色谱法测定土壤中有机氯农药

建立了加速溶剂萃取-固相萃取净化-气相色谱测定土壤中α-六六六、β-六六六、γ-六六六、δ-六六六、P,P′-DDE、P,P′-DDD、O,P′-DDT、P,P′-DDT等8种有机氯农药的方法。在0μg／L～500μg／L范围内方法线性良好,8种有机氯农药的检出限在0．06μg／kg～0．21μg／kg之间,基质加标试验的相对标准偏差为2．2％～5．8％,回收率为81．5％～113％。     

加速溶剂萃取-液相色谱测定土壤中酞酸酯类化合物

建立了加速溶剂萃取-液相色谱法测定土壤中14种酞酸酯类化合物的方法。结果表明,该方法对14种酞酸酯分离度较好,加标回收率为67.1%~128%,精密度RSD(n=6)为5.2%~15.0%,方法检出限为0.021~0.034 mg/kg。该方法操作简便、准确,具有较好的实用性。     

Effect of Accelerated Weathering on Biocomposites Processed by SMC and Compression Molding

The durability of biocomposites utilized for building components has been a subject of recent concern and questioning. To address these concerns, the long-term effects of weathering on biocomposites used as building components were evaluated using an accelerated weatherometer. The biocomposite samples were processed by sheet molding compounding (SMC) panel processing and/or compression molding. The accelerated weatherometer served to expose the samples to ultraviolet radiation (UV), condensation, and water spray at levels pertinent to actual conditions: 48 cycles of UV (340 nm) treatment at 60 °C for 2.5 h was followed by water spray for 0.5 h, and then condensation at 45 °C for 24 h. Twelve cycles were repeated in each test, and the total duration for the complete test was 2016 h. Measurements for color, surface roughness test weight change, and dynamical mechanical analysis were taken at regular intervals of time. It was found that the surface roughness increased, as the color changed, and storage modulus decreased with increases in the exposure time of the samples to accelerated weathering conditions, compared to their properties at the beginning of the test.