Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

基于SVR的长江经济带水环境承载力评价

基于DPSIRM模型构建区域水环境承载力评价指标体系,并基于SVR模型构建了区域水环境承载力评价模型,利用交叉验证法对SVR模型参数进行优化选择,进一步提高模型预测精度.运用该模型研究了长江经济带2009~2018年的水环境承载力演变趋势及空间差异,结果表明：长江经济带水环境承载力等级整体呈现升高趋势,其中上游城市群承载等级由II级（超载）提升到了IV级（弱可承载）;中游城市群承载等级由II级（超载）提升到了IV级（弱可承载）;下游长三角区域承载等级由I级（重超载）提升到了IV级（弱可承载）.将评价结果与熵权-TOPSIS法的评价结果相比较,相同率达到91.7%,说明SVR模型评价区域水环境承载力可行,评价结果可靠.以下游区域为例,分别对其6个子系统的承载力进行剖析,并运用单因素轮换OAT法对各子系统内的评价指标进行敏感性分析,便于决策者识别指标敏感性.     

矿物材料吸附去除污水中磷的试验研究

采用粉煤灰、高岭土、泥渣(取电厂澄清池排泥作脱水干燥处理)作为吸附剂深度处理污水中的磷,对比分析了3种吸附剂的吸附速度、吸附性能及除磷效果。结果表明:粉煤灰和高岭土用时20 min完成对磷的有效吸附,沉降泥渣用时5 min即可实现同等吸附效果;沉降泥渣对污水中磷的吸附能力较好,投加量为0.2 g/L的泥渣对磷的去除率可达98.1%,而投加量为0.2 g/L粉煤灰或高岭土对磷的去除率仅达到77.2%。     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

化工区环境突发事件的数学预测及应对措施

通过对某市化工区环境污染物概况的调查,建立了污染风险模型,并且根据模型获得的结果确定了区域内的主要污染物。在此基础上提出了化工区环境突发事件的应对措施,为今后的应急监测提供的理论保证。     

煤气化技术的前景

介绍了“煤气化──无烟燃烧技术”及其在小型工业锅上的应用，为解决我国煤烟型大气污染问题提供了一种全新的办法。     

SBR法处理中药材有机废水工艺研究

应用ＳＢＲ法对中药材有机废水进行了研究。考察了ＣＯＤＣＲ、ＢＯＤ５、ＳＳ、ＮＨ３－Ｈ的处理效果，以及ＰＨ、水温、污泥负荷等条件对去除率的影响。运行结果表明，ＰＨＯ ６．０－９．０、ｔ为１５－３０℃、污沁荷０．３ｋｇＢＯＤ５／ｋｇＭＬＳＳ．ｄ，运行程序：进水０．５ｈ（限制曝气）、曝气１０ｈ、脱氮１．５ｈ，沉降０．５ｈ，排水０．５ｈ、闲置１１ｈ，周期时间２４ｈ时ＣＯＤＣＲ去除率８８％、ＢＯＤ５９４％、     

ASM1中废水和污泥组分浓度的测定方法研究

对呼吸计量法应用于校准ASM1作了简明的阐述。在呼吸速率与模型组分关系的基础上,介绍了ASM1中废水与污泥各组分浓度的测定方法,并指出模型组分细化的意义。     

污泥综合处理技术系统的可行性分析

通过对污泥处理技术现状与污泥组成的分析，认为降低污泥的含水率是改善污泥可处理性的关键。以机械脱水加工热干燥过程可达到充分降低污泥含水率的目的。以此为主干所形成的污泥综合处理系统经能量与经济平衡分析，发现其能量输出大于输入，经济成本合理，有一定的技术经济可行性。     

重庆市城市污水厂污泥的处理与处置

分析了目前重庆市城市污水厂污泥的处理与处置现状 ,对今后重庆市城市污水厂污泥的管理进行了探讨 ,提出了几个应注意的问题。