硫酸盐还原菌对EH40焊接钢海水腐蚀的影响

目的研究无菌和SRB体系中EH40钢焊接接头的母材区、热影响区和焊缝区腐蚀差异。方法利用金相显微镜观察、失重法、电化学测试、扫描电镜和X射线光电子能谱仪等分析手段。结果焊缝区微观组织由块状铁素体(BLF)和魏氏组织(W)组成;热影响区可再分为粗晶区(CGHAZ)和细晶区(FGHAZ)两个区;母材区主要由BLF、AF和少量珠光体组成。在无菌对照体系中,焊缝区腐蚀速率为0.0026 mm/a,混合区次之,为0.0023 mm/a,母材区最小,为0.0019 mm/a。含SRB体系中,各区的腐蚀速率为:焊缝区(0.0037 mm/a)混合区(0.0034 mm/a)母材区(0.0030 mm/a)。热影响区腐蚀产物形貌粗大,点蚀孔也较大。结论焊缝区比母材区容易腐蚀,由此易造成小阳极大阴极加速腐蚀,热影响区容易发生点蚀。SRB能促进三个区域试样腐蚀加速。     

超级钢闪光对焊电热耦合过程温度场分布的有限元分析

为研究超级钢闪光对焊闪光阶段焊件的温度场分布 ,建立了轴对称有限元模型。运用单元死活技术解决闪光时液体过梁爆破引起物质烧损的模拟问题 ,提出了闪光焊过程中电热耦合作用的模拟方法。考虑单元死活的有限元分析结果与试验结果更加吻合 ,为选择和优化闪光焊焊接参数以及为闪光焊过程顶锻阶段的热力耦合过程的模拟提供了有效的分析手段     

铝合金LC52对接焊海洋大气应力腐蚀研究

在设计制作的恒载荷大气应力腐蚀试验装置上，进行了铝合金LC52对接焊拉伸试样的海洋大气应力腐蚀试验研究。，对海洋大气应力腐蚀试验中断裂的、加载应力为0.5σ。的试样分析表明．铝合金LC52焊接件在海南海洋大气环境下存在应力腐蚀开裂：Cl^-富集于SCC部分的含钙和／或含硫的第二相质点，促进了应力腐蚀开裂．获得了铝合金LC52焊接的海洋大气SCC失效特征。     

电热管焊接接头挤压裂纹的分析

针对电热管焊接接头挤压产生的裂纹 ,通过采用金相显微镜观察其金相组织并用直读光谱对原材料成分进行化学成分分析 ,排除了成分、焊接工艺规范等的影响。经过对挤压过程分析 ,发现应力集中点是产生裂纹的主要原因 ,并提出了改进的方法     

弧焊机器人用数控焊接变位机的研制

依据现有进口弧焊机器人的技术特点和工作要求 ,研制了与之配套的数控焊接变位机。该机工作台可进行旋转和倾斜两个运动 ,可使工件在最佳的位置进行焊接 ,与弧焊机器人一起构成了柔性加工单元。在实际焊接应用中 ,效果良好     

典型焊接结构CAD专家系统的研究与应用

论述了典型焊接结构CAD专家系统的内涵、设计思想和设计方法过程以及应用前景。     

变光焊接眼护具响应时间定义分析

通过对不同标准的变光焊接眼护具响应时间定义分析，提出各标准定义及计算值的区别，以利于帮助消费者进行产品选择和企业对产品设计的改进。     

基于ArcIMS的旅游安全管理系统

结合旅游业的特点,即综合性、敏感性、涉外性或国际性,提出旅游安全管理系统应该包括:灾前的防范系统、灾时的抗灾系统以及灾后的评估善后系统3大部分的设计思路。将相应的旅游重大危险源监控系统的功能定为:以行政监察、社会监督、行业自律和应急救援体系为主的宏观管理系统。阐述了Web GIS的优点并推荐了一种构建Web GIS的新技术———ArcIMS,利用ArcIMS的系统构建的旅游安全管理系统具有功能健全、管理方便、系统成熟和安全可靠的诸多优点;同时整个系统的构建相对于其他Web GIS系统的开发而言,技术难度比较低、开发速度比较快,而且系统运行相对稳定,减轻了系统维护的负担。最后,结合旅游安全信息流的特点,具体阐述了运用ArcIMS作为旅游安全管理系统的平台的合理性和可行性。     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

Resistance mash welding for joining of copper conductors for electric motors

The automotive industry is developing designs and manufacturing processes for a new generation of electric motors intended for use in hybrid and electric vehicles. This paper is focused on using solid-state welding to join rectangular wires in the fabrication of motor stators. Resistance welding has not typically been applied to copper due to its very high electrical conductivity; however through optimization of the current and pressure profiles, excellent quality copper-to-copper joints have been demonstrated with a technique known as resistance mash welding. A better understanding of resistance mash welding characteristics will help advancements in its application for stators. The limitations of this application will be discussed.