Co-composting of Paper Mill Sludge and Hardwood Sawdust Under Two Types of In-Vessel Processes

Abstract

Recycling of organic residues by composting is becoming an acceptable practice in our society. Co-composting dewatered paper mill sludge (PMS) and hardwood sawdust, two readily available materials in Canada, was investigated using uncontrolled and controlled in-vessel processes. The composted materials were characterized for total C and N, water-soluble, acid-hydrolyzable, and non-hydrolyzable N, extractable lipids, and by Fourier Transform Infrared (FT-IR) spectrophotometry. In the controlled scale process, the loss of organic matter was approximately 65% higher than in the uncontrolled process. After undergoing initial fluctuations in N fractions during the first two days of composting, by the end of the process, concentrations of water-soluble N decreased while those of acid-hydrolyzable and nonhydrolyzable N increased in the controlled process, whereas in the uncontrolled process, water-soluble N increased, but N in the other two fractions decreased continuously, indicating that the biochemical transformations of organic matter were not completed. Data on extractable lipids and FT-IR spectra suggest that the compost produced from the controlled process was bio-stable after 14 days, while the uncontrolled process was not stabilized after 18 days. In addition, FT-IR data suggest the biological activity during composting centered mainly on the degradation of aliphatic structures while aromatic structures were preserved. The co-composting of the PMS and hardwood sawdust can be successfully achieved if aeration, moisture, and bio-available C/N ratios are optimized to reduce losses of N.     

芳烃抽提装置的环境保护设计

介绍了芳烃抽提装置的环保设计标准及设计原则，并讨论了芳烃抽提装置中污染物排放情况和治理措施。     

氯代芳香化合物的生物降解机理探讨

对生物降解氯代芳香化合物的研究现状及其应用前景进行综述,分析了氯代芳香化合物的结构与其生物降解性的关系,降解机理包括氧化脱氯机理、还原脱氯机理及共代谢作用机理。     

Development of a catalytic cracking process for converting waste plastics to petrochemicals

The catalytic degradation of polyolefin using H-gallosilicates was examined using a bench-scale reactor (0.8kg/h) with semicontinuous feeding and the following plastics: (1) low-density polyethylene (LDPE) pellets; (2) linear low-density polyethylene (L-LDPE) pellets; (3) high-density polyethylene (HDPE) pellets; (4) polypropylene (PP) pellets; (5) polyolefin obtained from pulverized industrial waste plastics. The yields of liquid compounds from these materials, which were aromatics in most cases, ranged from 55wt% to 68wt%. With an increase in the ratio of total reactant to catalyst, the liquid yield remained the same. Yields of benzene, toluene, and xylenes (BTXs) decreased rapidly to below 50wt% at a ratio of more than 30. Differences in this ratio for BTXs were always small and were independent of the material. Only about half of the gas product was propane with a fresh catalyst. When the experiments were repeated, propylene, isobutane, and isobutene were found to increase.     

Biobased Fiber Production: Enzyme Retting for Flax/Linen Fibers

Flax (Linum ustitatissimum L.) is the source of natural fibers that provides biobased products for a variety of existing markets, but considerable processing and cleaning is required. Flax fibers, and bast fibers generally, are produced in the outer regions of the stem between bark and inner core tissues and require retting, which is the microbial separation of fiber from nonfiber tissues, as the first and most limiting stage of processing. Enzyme retting offers a method to overcome disadvantages of the current method, i.e., dew-retting, for high- and consistent-quality fibers with tailored properties for specific applications. Using chemical analyses, microscopy, and microspectroscopy, sites of carbohydrates, aromatics, and waxes plus cutins were identified in flax stems and their relationship to effective enzyme retting determined. Aromatics occur mostly in the inner, core tissues, with the fibers containing only small amounts located sporadically in cell corners of fiber bundles. Therefore, effective retting using enzymes to separate the aromatic-containing tissues from the fibers, but not to degrade aromatic compounds per se, is required. Waxes and cutin in the epidermal regions are effective barriers to enzyme penetration, and mechanical disruption facilitates enzyme penetration into the stems. Pectinases, with chelators to remove Ca⁺⁺ and destabilize pectin molecules, remove matrix compounds holding fibers within the stem and have been used in effective formulations to ret flax stems.     

天津市大气中挥发性有机物的组成及分布特点

参照美国EPA TO17的方法研究天津市不同功能区大气中挥发性有机物(VOCs)冬夏季中的组成及浓度水平,共检出62种挥发性有机物,冬季VOCs浓度水平低于夏季;苯系物稳定存在于各功能区且所占比例最高;VOCs的主要来源是机动车尾气。     

Detection of dioxygenase genes present in various activated sludge

GOAL, SCOPE AND BACKGROUND: Activated sludge from refineries contains various microorganisms that could utilize aromatics under aerobic conditions due to the oxygenase enzymes. Dioxygenase enzymes are oxygenases, which are involved in the ring cleavage step of aromatic hydrocarbons. In this study, the selected catabolic loci involved in ring cleavage have been monitored in the activated sludge samples at different time intervals. The investigation of the dioxygenase genes in the Effluent Treatment Plants (ETPs) and evaluation of their presence at different time points provides a clue for the aromatic utilizing potential of the inherent microbial flora. METHODS: The catabolic gene loci pheB, xylE, tod-isp, bed and nahG responsible for the enzymes catechol 1,2-dioxygenase, catechol 2,3-dioxygenase, toluene dioxygenase-iron-sulphur protein component, benzene dioxygenase and naphthalene dioxygenase were used respectively. The time dependent change in eubacterial population was demonstrated by the amplification of 16S rDNA product, followed by restriction digestion. The template DNA was obtained from the activated sludge collected from ETPs. The supporting physiological data for the overall performance of sludge was developed using respirometric analysis. The on-site COD and MLSS analysis for ETP was used in final evaluation. The study was carried out with samples collected from three different ETPs and also from a selected ETP at different time intervals. RESULTS AND DISCUSSION: The respirometric studies were carried out with phenol, catechol, toluene, and naphthalene to arrive at the target genotypes for further study by PCR protocol. The respirometric analysis coupled with the COD and MLSS analysis represented the physiological capacity of the various sludges. Initially, the tracking protocol was optimized by using different sludge samples, which were collected from refineries. The selected genotypes were amplified and their presence has been confirmed using Southern analysis. The gene loci tod-isp, bed and xylE were commonly observed at various time intervals of the sludge from the same source. The gene loci pheB and nahG were found to be relatively rare. CONCLUSION: The 16S rDNA PCR products after restriction digestion produced different DNA fingerprint patterns, suggesting that the microbial community composition was diverse in the three sources. Similarly, the presence of the catechol 2,3-dioxygenase, benzene dioxygenase and toluene dioxygenase genes confirmed the aromatic degrading potential in the various sludges. The probes could not pick the nahG and pheB genes. However, the respirometeric assay suggested that the oxidative capacity to use naphthalene as a substrate exists. RECOMMENDATION AND PERSPECTIVE: Our study of the diversity at various time points from the ETP provided an overview of the shifts of the catabolic composition of the sludge. This also depends on the influential parameters like the incoming pollutant level and the environmental conditions that are prevailing and often changing from time to time. The results of direct DNA extraction and PCR amplification do reflect the relative abundance of a particular catabolic genotype, which could be used to monitor the efficiency of treatment.     

Dovehicular emissions dominate the source of C6-C8aromatics in the megacity Shanghai of eastern China?

The characteristic ratios of volatile organic compounds (VOCs) to i-pentane, the indicator of vehicular emissions, were employed to apportion the vehicular and non-vehicular contributions to reactive species in urban Shanghai. Two kinds of tunnel experiments, one tunnelwith more than 90% light duty gasoline vehicles and the otherwithmore than 60% light duty diesel vehicles, were carried out to study the characteristic ratios of vehicle-related emissions from December 2009 to January 2010. Based on the experiments, the characteristic ratios of C6-C8 aromatics to i-pentane of vehicular emissions were 0.53 ± 0.08 (benzene), 0.70 ± 0.12 (toluene), 0.41 ± 0.09 (m,p-xylenes), 0.16 ± 0.04 (o-xylene), 0.023 ± 0.011 (styrene), and 0.15 ± 0.02 (ethylbenzene), respectively. The source apportionment results showed that around 23.3% of C6-C8 aromatics in urban Shanghai were from vehicular emissions, which meant that the non-vehicular emissions had more importance. These findings suggested that emission control of non-vehicular sources, i.e. industrial emissions, should also receive attention in addition to the control of vehicle-related emissions in Shanghai. The chemical removal of VOCs during the transport from emissions to the receptor site had a large impact on the apportionment results. Generally, the overestimation of vehicular contributions would occur when the VOC reaction rate constant with OH radicals (k_OH) was larger than that of the vehicular indicator, while for species with smaller kOH than the vehicular indicator, the vehicular contribution would be underestimated by the method of characteristic ratios.