The economics of bauxite and aluminium: Distributed lags and new econometric estimates

Bauxite supply and demand equations for the largest producers and consumers are estimated with 1958–1982 data. In specifications that include industrial activity indexes, substitute prices and energy costs, these regressors improve the fits and are statistically significant. The own price variable, the Koyck-Nerlove lagged dependent variable, or both, become insignificant, or their estimated coefficients are substantially altered, in relation to their values in price-only models, which overestimate the own price impact and the gap between long- and short-term effects. Industrial activity is the main determinant, followed by the other new regressors. The Jamaican response to price is perverse and significant.     

铝土矿改性方法的研究

以廉价的铝土矿为原料,辅以适当添加剂,经简单处理,在７００℃－８００℃的温度下灼烧３ｈ,即可制成能够去除水中高浓度ＳＯ＾２－４的高效净水剂。将该净水剂加到适量的高浓度ＳＯ＾２－４水中,处理３０ｍｉｎ,就能达到国家饮用水标准。     

Arsenic stabilization by zero-valent iron,bauxite residue,and zeolite at a contaminated site planting Panax notoginseng

Panax notoginseng (Burk.) F.H. Chen, a rare traditional Chinese medicinal herb, is a widely used phytomedicine used all over the world. In recent years, the arsenic contamination of the herb and its relative products becomes a serious problem due to elevated soil As concentration. This study aimed to evaluate the effects of different types and dosages of amendments on As stabilization in soil and its uptake by P. notoginseng. Results showed that comparing to control treatment, the As concentrations of P. notoginseng declined by 49–63%, 43–61% and 52–66% in 0.25% zero-valent iron (Fe(0)), 0.5% bauxite residue, and 1% zeolite treatment, respectively; whereas the biomasses were elevated by 62–116%, 45–152% and 114–265%, respectively. The As(III) proportions of P. notoginseng increased by 8%, 9%, and 8%, and the transfer factors of As from root to shoot increased by 37%, 42% and 84% in the optimal treatments of Fe(0), bauxite residue, and zeolite. For soil As, all the three amendments could transform the non-specifically adsorbed As fraction to hydrous oxides Fe/Al fractions (by Fe(0) and red mud) or specifically adsorbed As fraction (by zeolite), therefore reduced the bioavailability of soil As. With a comprehensive consideration of stabilization efficiency, plant growth, environmental influence, and cost, Fe(0) appeared to be the best amendment, and zeolite could also be a good choice. In conclusion, this study was of significance in developing As contamination control in P. notoginseng planting areas, and even other areas for medicinal herb growing.     

Iron and aluminium based adsorption strategies for removing arsenic from water

Arsenic is a commonly occurring toxic metal in natural systems and is the root cause of many diseases and disorders. Occurrence of arsenic contaminated water is reported from several countries all over the world. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of arsenic in drinking water and the need to develop low cost techniques which can be widely applied for arsenic removal from contaminated water. This review briefly presents iron and aluminium based adsorbents for arsenic removal. Studies carried out on oxidation of arsenic(III) to arsenic(V) employing various oxidising agents to facilitate arsenic removal are briefly mentioned. Effects of competing ions, As:Fe ratios, arsenic(V) vs. arsenic(III) removal using ferrihydrite as the adsorbent have been discussed. Recent efforts made for investigating arsenic adsorption on iron hydroxides/oxyhydroxides/oxides such as granular ferric hydroxide, goethite, akaganeite, magnetite and haematite have been reviewed. The adsorption behaviours of activated alumina, gibbsite, bauxite, activated bauxite, layered double hydroxides are discussed. Point-of-use adsorptive remediation methods indicate that Sono Arsenic filter and Kanchan™ Arsenic filter are in operation at various locations of Bangladesh and Nepal. The relative merits and demerits of such filters have been discussed. Evaluation of kits used for at-site arsenic estimation by various researchers also forms a part of this review.     

Natural radioactivity in refractory manufacturing plants and exposure of workers to ionising radiation

This paper shows the results of a survey carried out at some refractory manufacturing plants. During the first part of the survey, the concentration of natural radioactivity in raw materials and end-products, coming from four plants, was assessed. Several raw materials and, as a consequence, some end-products as well have shown activity concentrations exceeding a few hundreds of Bq kg⁻¹ of ²³⁸U and ²³²Th. In some important raw materials, such as bauxite and corundums, a remarkable radioactive disequilibrium was observed; this is probably due to the high temperature processes undergone by these materials. The second part of the survey focussed on the measurements of ambient equivalent dose rates, airborne dust concentrations and radon indoor. On the basis of results obtained, the effective dose for the standard worker was estimated. Two different types of refractory plants were investigated. Effective doses for both plants were lower than 1 mSv y⁻¹.     

Variation on leaching behavior of caustic compounds in bauxite residue during dealkalization process

Bauxite residue,a byproduct of alumina manufacture,is a serious environmental pollutant due to its high leaching contents of metals and caustic compounds.Four typical anions of CO₃^2-,HCO₃^-,Al(OH)₄^- and OH-(represented caustic compounds) and metal ions(As,B,Mo and V) were selected to assess their leaching behavior under dealkalization process with different conditions including liquid/solid ratio(L/S ratio),temperature and leaching...     

Improvements on physical conditions of bauxite residue following application of organic materials

Soil formation and ecological rehabilitation is the most promising strategy to eliminate environmental risks of bauxite residue disposal areas. Its poor physical structure is nevertheless a major limitation to plant growth. Organic materials were demonstrated as effective ameliorants to improve the physical conditions of bauxite residue. In this study, three different organic materials including straw (5% W/W), humic acid (5% W/W), and humic acid-acrylamide polymer (0.2% and 0.4%, W/W) were selected to evaluate their effects on physical conditions of bauxite residue pretreated by phosphogypsum following a 120-day incubation experiment. The proportion of 2-1 mm macro-aggregates, mean weight diameter (MWD) and geometric mean diameter (GWD) increased following organic materials addition, which indicated that organic materials could enhance aggregate stability. Compared with straw, and humic acid, humic acid-acrylamide polymer application had improved effects on the formation of water-stable aggregates in the residues. Furthermore, organic materials increased the total porosity, total pore volume and average pore diameter, and reduced the micropore content according to nitrogen gas adsorption (NA) and mercury intrusion porosimetry (MIP) analysis, whilst enhancing water retention of the residues based on water characteristic curves. Compared with traditional organic wastes, humic acid-acrylamide polymer could be regarded as a candidate according to the comprehensive consideration of the additive amount and the effects on physical conditions of bauxite residue. These findings could provide a novel application to both Ca-contained acid solid waste and high-molecular polymers on ecological rehabilitation at disposal areas.     

Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application

Bauxite tailings are a major type of solid wastes generated in the flotation process. The waste by-products caused significant environmental impact. To lessen this hazardous effect from poisonous mine tailings, a feasible and cost-effective solution was conceived and implemented. Our approach focused on reutilization of the bauxite tailings by converting it to 4A zeolite for reuse in diverse applications. Three steps were involved in the bauxite conversion: wet-chemistry, alkali fusion, and crystallization to remove impurities and to prepare porous 4A zeolite. It was found that the cubic 4A zeolite was single phase, in high purity, with high crystallinity and well-defined structure. Importantly, the 4A zeolite displayed maximum calcium ion exchange capacity averaged at 296 mg CaCO₃/g, comparable to commercially-available zeolite (310 mg CaCO₃/g) exchange capacity. Base on the optimal synthesis condition, the reaction yield of zeolite 4A from bauxite tailings achieved to about 38.43%, hence, this study will provide a new paradigm for remediation of bauxite tailings, further mitigating the environmental and health care concerns, particularly in the mainland of PR China.     

Phosphogypsum stabilization of bauxite residue: Conversion of its alkaline characteristics

Reduction of the high alkalinity of bauxite residue is a key problem to solve to make it suitable for plant growth and comprehensive utilization. In this study, phosphogypsum, a waste product from the phosphate fertilizer industry, was used to drive the alkaline transformation of the bauxite residue. Under optimal water washing conditions(liquid/solid ratio of 2 mL/g, 30°C, 24 hr), the impact of quantity added, reaction time and reaction mechanism during phosphogypsum application were investigated. Phosphogypsum addition effectively lowered p H levels and reduced the soluble alkalinity by 92.2%. It was found that the concentration of soluble Na and Ca ions in the supernatant increased gradually, whilst the exchangeable Na+and Ca~(2+)in solid phase changed 112 mg/kg and 259 mg/kg, respectively. Ca~(2+)became the dominant element in the solid phase(phosphogypsum addition of 2%, liquid/solid ratio of 2 mL/g, 30°C, 12 hr). X-ray diffraction data indicated that cancrinite and hydrogarnet were the primary alkaline minerals. SEM images suggested that phosphogypsum could promote the formation of stable macroaggregates, whilst the content of Ca~(2+)increased from 5.6% to 18.2% and Na reduced from 6.8% to 2.4%. Treatment with phosphogypsum could significantly promote the transformation of alkalinity cations by neutralization, precipitation and replacement reactions.This research provided a feasible method to promote soil formation of bauxite residue by phosphogypsum amendment.     

The dynamic development of bacterial community following long-term weathering of bauxite residue

Bauxite residue is the industrial waste generated from alumina production and commonly deposited in impoundments. These sites are bare of vegetation due to the extreme high salinity and alkalinity, as well as lack of nutrients. However, long term weathering processes could improve residue properties to support the plant establishment. Here we investigate the development of bacterial communities and the geochemical drivers in bauxite residue, using Illumina high-throughput sequencing technology. Long term weathering reduced the pH in bauxite residue and increased its nutrients content. The bacterial community also significantly developed during long term weathering processes. Taxonomic analysis revealed that natural weathering processes encouraged the populations of Proteobacteria, Chloroflexi, Acidobacteria and Planctomycetes, whereas reducing the populations of Firmicutes and Actinobacteria. Redundancy analysis (RDA) indicated that total organic carbon (TOC) was the dominant factors affecting microbial structure. The results have demonstrated that natural weathering processes improved the soil development on the abandoned bauxite residue disposal areas, which also increased our understanding of the correlation between microbial variation and residue properties during natural weathering processes in Bauxite residue disposal areas.