Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.     

C OD在线分析仪比对中应注意的问题

分析了COD在线分析仪和实验室比对结果人为差异的原因是样品不均匀,在线分析仪取样装置滤过,取样层面和采样方式以及沉淀消除的方法不同造成的.提出应在相同的地点、层面和同一容器取样,用相同沉淀消除方法去除样品中氯离子干扰,保证两方法比对中使用水样的一致均匀,使测试结果正确可信.     

分光光度法测定染色废水的色度

为消除测定染色废水色度的主观误差，采用分光光度法测定染色废水的色度，与稀释倍数法相比，具有精确，重现性好，适用范围广等特点，ＰＨ值对色度的测定有明显影响，控制ＰＨ值为７．６０，测定色度具有可比性。     

CODMn重新稀释取样体积的推定

对原CODMn法测地表水二次取样体积进行了推导，建立了实际适用取样体积公式，具有一定的适用性。     

选择双波长分光光度法测定水中余氯

余氯在pH6.5条件下与PADA发生显色反应,本文根据稳定悬浮颗粒对光的吸收行为研究选择波长测定水体中余氯,实验证明在450～515nm波长范围内任意选择两波长比色按照推导公式和模型计算余氯浓度,测定方便结果准确,且计算模型稳定,几乎不受操作环境影响。适合于废水和天然水的监测。     

乙酸型顶极群落的内平衡与反馈调节机制研究

通过产酸脱硫反应器处理高浓度硫酸盐有机废水的连续流试验，从“动态”角度考察COD／SO4^2-比改变引起的pH值、氧化还原电位（ORP）、碱度（ALK）和末端产物（VFAs）等的变动及生态因子的叠加效应引发的优势种群变迁，分析了乙酸型顶极群落的稳定性及其发生定向性生态演替的规律，进而阐明了乙酸型顶极群落抵抗环境压力的内平衡与反馈调节机制，并指出乙酸型代谢和乙酸型顶极群落是产酸脱硫生态系统的典型特征。     

催化快速法测定COD_(Cr)定量下限的研究

催化快速法测定CODCr是我国目前环境监测中普遍使用的最快速、简便、可靠的方法 ,该法的检测范围是 60～ 1 0 0 0mg/l,我们经过研究测出催化快速法的定量下限为 1 0mg/l,扩大了该法的应用范围。     

鞍钢外排废水COD的测定及统计分析

运用等污染负荷法，对鞍钢外排废水COD进行了统计分析，确定主要污染，并对如何治理提出了建议。     

生物质气化洗焦废水的预处理和微生物降解

为了对生物质气化洗焦废水进行深度处理,达到废水排放标准,采用物理过滤和微生物降解相结合的方法,对洗焦废水的原液进行处理。实验结果表明,用木屑、颗粒活性碳、微生物降解的连续步骤处理生物质气化洗焦废水,可达到理想的生物质气化洗焦废水COD的去除效果。