Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

废旧阴极-赤泥协同处理烧结熟料的溶出性能

采用XRF,ICP-MS,XRD及SEM-EDS检测手段,研究了废旧阴极-赤泥高温协同处理所得熟料的溶出性能.结果表明,Na₂CO₃浓度,温度,时间及液固比因素对Al₂O₃,Na₂O溶出率TFe₂O₃的富集效果的影响趋势一致.最适宜溶出条件为：Na₂CO₃ 30g/L,温度50℃,时间30min,液固比8.该条件下,熟料中Al₂O₃和Na₂O溶出率分别高达为87.41%和92.51%;相应的SiO₂和CaO溶出率仅为3.02%和0.36%,铁矿物几乎不溶.溶出渣中的TFe₂O₃含量从熟料中23.64%提高到39.89%,研究表明溶出工艺同步实现了熟料中铝、钠的回收和铁的富集.再者,处理后溶出渣较熟料减量近16%（以铝和钠溶出率测算）,且属于非危险性废物.     

有机垃圾厌氧消化泡沫产生机理及控制方法

为了分析厌氧消化泡沫的产生机理和控制方法有助于解决有机垃圾厌氧消化起泡问题,本文调研了近年来报道的厌氧消化系统起泡现象,并从底物特性、反应器构造及运行条件和消化过程相关特性3方面分析了不同底物、工艺和环境条件下厌氧消化反应器的起泡机理;讨论了丝状菌指数、表面张力、粘度、有机负荷、起泡趋势和泡沫稳定性等参数作为起泡风险评价指标的合理性;介绍和比较了4类消泡方法（物理法、机械法、生物法和化学法）的消泡原理及优缺点.目前,除污泥厌氧消化系统外,其他有机垃圾厌氧消化系统起泡的主要因素尚不明确,而这也限制了泡沫控制方法的开发.后期探索关键起泡微生物或研究生物表面活性物质与起泡的相关性,将有助于从新的角度揭示起泡机理,并开发出针对性更强的泡沫控制方法.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.     

微波消解-ICP-OES联合测AZ61镁合金中Zn、Mn、Al的不确定度分析

目的研究AZ61镁合金中合金元素成分分析过程中的不确定度因素,以提高分析结果的准确性。方法采用微波消解仪消解样品,以电感耦合等离子体发射光谱仪(ICP-OES)测定AZ61镁合金中锌、锰、铝元素的含量。分析测试过程中产生不确定度的因素,并且进行评定和计算。结果采用微波消解-ICP-OES法测定镁合金中锌、锰、铝元素的含量时,测量不确定度主要由样品溶液稀释、移液枪、标准曲线以及测试的重复性引起,AZ61镁合金主要的合金成分为锌(1.1270%±0.0433%)、锰(0.1797%±0.0064%);铝(6.4468%±0.2029%)。结论对分析过程中产生的不确定度因素进行分析及评定,可以确保分析结果的可靠性以及准确性,从而更好地控制镁合金的性能,提高镁合金的装备环境适应性。     

离子交换树脂光度法测定微量铁的研究

研究了以阳离子交换树脂为显色载体，利用直接吸附在树脂上有色络合物－Fe(II)邻二氮菲的吸光度，借以检测水和火腿肠中铁的新方法，本法具有比原子吸收法更高的灵敏度，稳定性和选择性，并对成络及树脂吸附条件作了较详细研究。     

表面活性剂存在下铁-邻菲罗啉-曙红分光光度法的研究

研究了表面活性剂(乳化剂OP)存在下,铁、邻菲罗啉、曙红的显色反应.该离子缔合物的最大吸收波长为545 nm,摩尔吸光系数为9.4×104 L·mol-1·cm-1,铁含量在0-0.4 mg/L内符合比耳定律.以自来水为基体进行铁的回收实验,回收率在99%以上.     

Simultaneous determination of parathion and p-nitrophenol in vegetable tissues by derivative spectrophotometry

A first derivative spectrophotometric method has been developedfor the determination of parathion and p-nitrophenol in vegetabletissues. Ethanol was used as solvent for extracting the compoundsfrom the tissues and subsequently the samples were evaluated against a vegetable tissue blank, directly by derivative spectrophotometry. The simultaneous determination of these compounds can be carried out using the zero-crossing approach for parathion at 253.0 nm and for p-nitrophenol at 273.1 nm. In the samples each analyte was determined in the presence of one another in the ranges between 4.9 to 3883.5 g g^-1 forparathion and 4.9 to 3285.3 g g^-1 for p-nitrophenol.The detection limits (3) were found to be 1.5 and 1.4 g g^-1 for parathion and p-nitrophenol, respectively. The relative standard deviations were in all instances less than1.8%. The proposed method was applied to the determination ofthe analytes in spiked leafs of corn. The results show a goodrecovery and they are in agreement with those obtained bypolarography.     

C OD在线分析仪比对中应注意的问题

分析了COD在线分析仪和实验室比对结果人为差异的原因是样品不均匀,在线分析仪取样装置滤过,取样层面和采样方式以及沉淀消除的方法不同造成的.提出应在相同的地点、层面和同一容器取样,用相同沉淀消除方法去除样品中氯离子干扰,保证两方法比对中使用水样的一致均匀,使测试结果正确可信.     

自动电位滴定法测定水中氯离子

以银电极为响应电极，用硝酸银溶液滴定水中氯离子，等当点时，产生电位突跃，以此确定终点电位，在仪器上锁定的此终点电位值，从而完成样品的自动分析。