Simulated reaction of formaldehyde and ambient atmospheric particulate matter using a chamber

The reaction of HCHO with Beijing winter's real ambient particulate matter(PM) inside a 3.3 m~3 Teflon Chamber was conducted in this study. NO_2, O_3 and H_2O gases were removed from the ambient aerosol before entering into the chamber. The decays of HCHO were monitored(acetylacetone spectrophotometry method) during the reactions at different PM number concentrations(N_a) and relative humidities(RHs), and the formed particulate formate was detected by IC and XPS techniques. The results showed that when RH was10%–15%, the decay rate of HCHO in the chamber was higher with the existence of PM from relatively clean days(with number concentration(N_a) 200,000 particle/L, 0.35–22.5 μm)compared to dirty days(N_a 200,000 particle/L, 0.35–22.5 μm). When RH increased to 30%–45%, PM can hardly have significant influences on the decay of HCHO. The formations of formate on the reacted PM were consistent with the HCHO decay rates at different ambient PM N_aand RH conditions. This is a first study related to the "real" ambient PM reacted with HCHO and suggested that in the clean and low RH days, PM could be an effective medium for the conversion of HCHO to formate.     

含汞原料中汞挥发速率的测试方法研究

以PVC行业废汞触媒、糊式锌锰电池浆液、含汞锌膏为原料,采用动力通量箱法测试其挥发速率,研究了最佳试验操作条件。结果表明:通量箱气体流速在0.5 L/min以下,采用两级大型气泡吸收管吸收挥发汞时效率可达99%以上,增加1次空白测量可测得通量箱壁汞吸附量。     

峒室大爆破的安全问题

全面总结了峒室大爆破设计和施工方面的安全，并给出其实施方案     

光电测试系统及其在硐室排污通风研究中的应用

介绍了光电微机测试系统的构成、测试原理及其在扁平硐室排污通风实验研究中的应用,并根据模拟实验结果,提出了硐室排污通风风量的通用计算式:Q=β（V/t）In(Co/C)。     

Calibration and testing of a dynamic flow-through chamber for field determination of methyl bromide volatilization flux

Accurate emission measurement of highly volatile chemicals such as methyl bromide (MeBr) is a crucial step in assessing their potential for environmental contamination. Use of flux chambers is a simple method for measuring emission rate under field conditions. To validate the applicability of a dynamic flow-through chamber for measuring MeBr emission, we provide a complete presentation of calibration and testing of the chamber. The calibration was made under a controlled system subject to ambient temperature changes. Two field experiments were conducted to test the chamber for measuring MeBr flux under conditions similar to commercial soil fumigation practices. In both the calibration and the two field experiments, the chamber provided accurate emission estimates. The maximum mass balance error was < 10% which is comparable to the micrometerological method. Because of its simplicity, we believe this dynamic flux chamber can be used reliably in quantifying the emission dynamics of highly volatile chemicals such as MeBr.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.     

Emissions of organophosphate and brominated flame retardants from selected consumer products and building materials

The emissions of selected flame retardants were measured in 1- and 0.02-m³ emission test chambers and 0.001-m³ emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SER_a) of TCPP varied between 20 ng m⁻² h⁻¹ and 140 μg m⁻² h⁻¹.The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SER_u) of organophosphates were determined to be 10–85 ng unit⁻¹ h⁻¹. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SER_a of between 0.2 and 6.6 ng m⁻² h⁻¹ and an SER_u of between 0.6 and 14.2 ng unit⁻¹ h⁻¹. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SER_a of between 0.1 and 29 ng m⁻² h⁻¹ and decabromodiphenylether was not detectable at all.     

Time course of isocyanate emission from curing polyurethane adhesives

The time course of isocyanate emission from curing polyurethane (PUR) resins and adhesives was studied in two different emission test chambers. The measured emissions were strongly dependent on the type of experiment. The adhesives under investigation contained different types of diisocyanates and are used for different applications, e.g. for fixing of textile floor coverings. The influence of the curing mechanism on emission was studied by comparing the emission curves of one-component adhesives (OCA) and two-component adhesives (TCA). For TCA, the decrease in isocyanate emission was found to follow a two-step process during curing. In the first step, the emission is dominated by surface evaporation, and the decay of emission is mainly caused by the decrease in monomer content due to reaction. In the second step, the release is limited by internal diffusion. The influence of monomer reactivity on the emission profile could be demonstrated for 2,4′- and 4,4′-MDI. The less-reactive 2,4′-MDI caused prolonged emission. A strong dependence of emission rates on temperature and adhesive viscosity was also obvious. The evaluation of emission rates of different commercially available PUR adhesives showed the highest emission from systems that are applied at high temperatures. The high reactivity of diisocyanates requires special techniques for sampling and analysis. Therefore, an analytical method using HPLC–MS/MS was developed that enables limits of quantitation of <5 ng/m³ with a sampling volume of 100 l.     

硐室爆破中安全填塞长度设计原则的研究

通过分析药室体积和药室横断面积，应用气体运动相似的特性，推导出一种新的硐室爆破填塞长度设计原则，并给出了计算实例