LCA of eucalyptus wood charcoal briquettes

This paper sets out to describe the environmental impact assessment for wood charcoal briquettes produced from eucalyptus wood in Brazil, with specific reference to those impacts associated with Global Warming Potential. To achieve that objective, the work was undertaken in accordance with ISO 14040 "Environmental management - Life cycle assessment - Principles and framework" which describes essential LCA characteristics and good practices. Charcoal briquettes are produced from two basic raw materials, charcoal fines and starch. The fines result from the production of charcoal from sustainably managed eucalyptus plantations. Starch is extracted from babaçu pulp in the Amazon region. Multi-output processes were allocated based on income from the different by-products. The results showed that more than 90% of incoming CO₂ was due to biomass production for charcoal, and the remainder to starch biomass production. Based on Brazilian data, as well as information provided by the GaBi4.3 database, it turned out that supplying the energy content of 1 kg of briquettes resulted in the sequestration of 3.9690 kg of CO₂, i.e. around 4 kg of CO₂ per kg of briquettes produced. CO₂ emissions throughout the briquette production process are totally compensated for by the environmental quality of the raw materials used.     

Fire as a Soil-Forming Factor

In the span of a human generation, fire can, in theory, impact all the land covered by vegetation. Its occurrence has many important direct and indirect effects on soil, some of which are long-lasting or even permanent. As a consequence, fire must be considered a soil-forming factor, on par with the others traditionally recognized, namely: parent material, topography, time, climate, living beings not endowed with the power of reason, and humans.     

Recreational impacts on Colorado River beaches in Glen Canyon,Arizona

Recreational impact was measured on eight beaches in Glen Canyon National Recreation Area and 15 beaches in Grand Canyon National Park using permanently located transects and plots. Recreational impact indices included densities of human trash and charcoal and a measure of sand discoloration due to charcoal. Significant increases in the indices occurred on several Glen Canyon beaches over a seven-month period. Sand discoloration became significantly higher over all Glen Canyon beaches during the same time period. All indices were significantly higher in Glen Canyon than on similar Grand Canyon beaches. These differences are probably due to differences in: (a) level of impacts tolerated by the respective management regimes and, (b) in the number of user days among the two National Park Service administrative units. Management alternatives are presented for reversing the present trends of recreational impact on Glen Canyon beaches.     

Holocene fire history from the Greater Blue Mountains World Heritage Area, New South Wales, Australia: the climate, humans and fire nexus

This study presents a reconstruction of the fire activity of the last ~14,200 cal. years BP (before AD 1950) from Gooches Crater Right, located on the Newnes Plateau, approximately 150 km to the west of Sydney (~33°27′S, 150°16′E) within the Blue Mountains National Park. Charcoal analysis and palynology were undertaken with the aim of untangling any inter-relationship between climate, humans and fire. A chronology of the site was provided by radiocarbon dating. The dominant control on fire in this environment during the Holocene appears to be climate. Periods of climate change, identified in previous studies, are associated with higher levels of fire activity. Fire was less ubiquitous between ~9,000 and 6,000 years BP, a period normally described as having a higher effective moisture in south-eastern Australia. The mid-Holocene fluctuations in charcoal may reflect anthropogenic fire, climate forcing or alternatively human responses to any climate change. Coeval changes in palaeoclimatic sequences elsewhere and palynology at the site support a climatic explanation or that Aboriginal people used fire within a climatic framework.     

Nutrient-impregnated charcoal: an environmentally friendly slow-release fertilizer

The widespread contamination of surface and ground water quality from the heavy use of fertilizer in modern agriculture is the current concern. Therefore, this study was carried out to develop a slow-release fertilizer using charcoal. The morphology of the charcoal impregnated fertilizer was investigated by scanning electron microscopy (SEM). This study also evaluated the release patterns of N, P, and K from impregnated charcoal using a simulated soil solution and distilled water as leaching solutions. The patterns of N, P, and K releases were examined in both static and continuous-flow conditions for 360 h. Releases of N, P, and K from impregnated charcoal were found to be slow and steady. However, the release trends of N, P, and K were higher in soil solution than distilled water under both the above conditions. Dissolution occurred when N, P, and K were released in the above leached solutions. As a result, the fertilizer impregnated charcoal could be developed as slow-release type fertilizer to minimize the contamination.     

Enhanced solar still productivity using transparent walls with an integral trough and organic porous absorber material

This experimental work has been conducted to compare the performance of the modified stills with that of the conventional still. Three modified stills (S1, S2, and S3) and conventional still (S4) were fabricated, each with 0.5 m² of the basin area. S1 and S3 had transparent double glass walls with air in between acting as insulation, whereas S2 has a single transparent wall. S4 has insulated plywood walls painted black from inside. A mixture of coco peat and charcoal was used in S1, S2, and S3, whereas there was no basin material for S4. Experiments were conducted by changing the water quantity in the solar still ranging from 5 to 10 kg. Maximum distillate output of 5.46 l/m²-d was obtained for S2, whereas it was 3.80 l/m²-d for S4 for an average solar radiation intensity of 675 W/m² (24.3 MJ/m²-d). Use of transparent walls with troughs to collect condensate increased the condenser area by 78.4%. The distillate water cost per liter was estimated as Rs. 0.86 (0.013 US$) and Rs. 1.61 (0.025 US$) for S2 and S4, respectively. Energy payback time for S2 was estimated as 4 months. Theoretical and experimental values showed that there is a significant loss of incoming solar radiation due to wall shadow.     

The miombo woodlands at the cross roads: Potential threats, sustainable livelihoods, policy gaps and challenges

The Miombo, the most extensive tropical woodland formation of Africa directly supports the livelihoods of over 100 million people through the provision of many tree products and ecosystem services essential to both the rural and urban communities. While the destruction of the Miombo has often been blamed on the rural communities dwelling near the forest resources, many urban dwellers depend heavily on the various products derived from the woodlands. This paper highlights the importance of the Miombo in the livelihoods of rural people, the potential threats to this ecosystem and opportunities for its sustainable management. About 70% of energy consumed in southern Africa is in the form of fuelwood or charcoal. The economic importance of the Miombo especially from non-timber forest products (NTFPs) is usually understated due to their perceived non-economic value yet they play an important role in sustaining livelihoods of forest dependent people in the miombo ecoregion. The Miombo also contributes to health services through the use of medicinal plant and products, in some cases, contributing up to 80% to rural health, including helping in coping with effects of HIV/AIDS, malaria and several diseases. The possibility of developing payment for environmental services schemes through public–private partnerships, and community-based sustainable management models are proposed. Through conservation and commercialization of some of the products and services, there is a potential to provide income and improve the livelihood of people involved in the trade along the value chain.     

Towards sustainable production and use of charcoal in Kenya: exploring the potential in life cycle management approach

The study seeks to demonstrate the potential role that industrial ecology could play towards energy poverty reduction and environmental conservation in Kenya through sustainable charcoal production and consumption. This is achieved through an exploration of the application of the life cycle management (LCM) concept that identifies various opportunities for technological intervention for energy and environmental conservation and reduction of material and energy losses. It also identifies opportunities for income generation at various stages of the product’s life cycle; an aspect critical in poverty reduction in developing countries. The study finds that applying LCM in the charcoal trade in Kenya can deliver social, economic and environmental benefits to developing country communities and should, therefore, be promoted. However, appropriate legal, policy and institutional frameworks must exist in these countries for this to occur.     

Comparisons of coarse and fine versions of two carbons for reducing the bioavailabilities of sediment-bound hydrophobic organic contaminants

Coarse (whole) and finely ground Ambersorb 1500 and coarse and fine coconut charcoal were compared as to their efficiencies in scavenging organic contaminants desorbed from sediment. Aqueous slurries of a test sediment spiked (1 ppm) with p,p^′-DDE (DDE), 2,2^′,5,5^′-tetrachlorobiphenyl (TCB), naphthalene (NAP), or phenanthrene (PHEN), and containing 1% levels of the test carbons were treated by shaking at 35 °C while exposed to clusters of low-density polyethylene membrane (detox spiders). Controls consisted of spiked sediments and detox spiders but no added carbon of any kind and thus represented unimpeded bioavailabilities (to the spiders). After the treatments––agitation periods from 2.5 to 60 h, depending on contaminant hydrophobicity––the exposed detox spiders were analyzed. The fine carbon of either type was more effective than its coarser variant in obstructing contaminant bioavailabilities. The finer variants of both carbons obstructed the bioavailabilities of NAP and PHEN equally well as did the coarser variants of both. Whole Ambersorb 1500 and coarse coconut charcoal were similarly ineffective in intercepting TCB and DDE. Ground Ambersorb 1500 obstructed virtually all bioavailability of all four contaminants and was far more effective than fine coconut charcoal in intercepting DDE and TCB. An additional experiment compared the effectiveness of ground Ambersorb 1500 and fine coconut charcoal in obstructing the bioavailabilities from sediment of a broad array of spiked organochlorine pesticides. The performance of ground Ambersorb 1500 was again found to be superior; the bioavailable levels of each of the 27 pesticides were markedly lower in the presence of ground Ambersorb 1500 than in the presence of fine coconut charcoal.     

Yield and quality of charcoals from olive mill residues and its stone and pulp fractions: An enhanced comparative study

Pyrolysis is a promising way to upgrade large amounts of residues from olive oil processing into charcoal. Pyrolysis of the stone and pulp fractions needed to be investigated before conclusions could be drawn. We subjected the olive stone fraction, the pulp fraction, and a mixture of the two to dynamic pyrolysis and isothermal pyrolysis at 360°C. We characterized the charcoals resulting from isothermal pyrolysis at 360°C for different durations in terms of the fixed-carbon content (FCC), carbon content (CC), and high heating value (HHV). We found that charcoal yield from the pulp was higher than that from the stones, which were 38.1% and 32.9%, respectively, after pyrolysis for 360 min. This seemingly unexpected result was due to the high contents of ash (6.22%) and extractives (13%) in the pulp, which remained completely and partially undecomposed, respectively, in the charcoals and are accounted for when calculating yields. However, charcoals obtained from the stones were of higher quality than charcoals from the pulp, with lower ash content and higher FCC, CC, and HHV. In particular, the FCC, CC, and HHV after pyrolysis for 360 min were 73.2%, 74.4%, and 30.2 MJ/kg for the stones and only 61.8%, 63.2%, and 25.9 MJ/kg for the pulp, respectively. Depending on the required quality of the final charcoal, our results help decide whether to pyrolyse the entire olive residues or only one of the two fractions, more likely the stones.