洪涝灾害条件下疏散交通生成预测方法

为有助于有关部门更准确预测洪涝灾害受灾民众的疏散量,结合非集计数据和集计数据的优点,提出分区集计数据的概念,设计了受灾区域分区方法,并通过意向偏好(SP)调查法对我国居民在洪涝条件下疏散交通需求数据进行调查。在此基础上,引入BP神经网络建立基于分区集计数据的疏散交通生成预测模型。利用调查数据进行实证分析发现,所设计方法取得了较好的预测效果,鲁棒性较好,平均相对预测误差仅为1.8%,其预测效果明显优于现有的非集计和整集计模型。     

Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

Synergistic effect of F and triggered oxygen vacancies over F-TiO2 on enhancing NO ozonation

Oxidation-absorption technology is a key step for NO_x removal from low-temperature gas. Under the condition of low O₃ concentration (O₃/NO molar ratio = 0.6), F-TiO₂ (F-TiO₂), which is cheap and environmentally friendly, has been prepared as ozonation catalysts for NO oxidation. Catalytic activity tests performed at 120°C showed that the NO oxidation efficiency of F-TiO₂ samples was higher than that of TiO₂ (about 43.7%), and the NO oxidation efficiency of F-TiO₂-0.15 was the highest, which was 65.3%. Combined with physicochemical characteristics of catalysts and the analysis of active species, it was found that there was a synergistic effect between F sites and oxygen vacancies on F-TiO₂, which could accelerate the transformation of monomolecular O₃ into multi-molecule singlet oxygen (¹O₂), thus promoting the selective oxidation of NO to NO₂. The oxidation reaction of NO on F-TiO₂-0.15 follows the Eley-Rideal mechanism, that is, gaseous NO reacts with adsorbed O₃ and finally form NO₂.     

City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

关于植物化学生态信息的开发与利用

植物的化学信息，早已被人们所关注和利用，目前，该研究已成为生态学和化学生态学中最活跃，最能为社会与生产服务的领域之一，生态系统中的物质流和能量流是资源，而生态学的信息则是更具开发，利用前景的资源。     

远程氧等离子体灭活大肠杆菌的研究

研究放电等离子体灭活大肠杆菌的效果。采用远程氧等离子体反应器,分别考察探究放电功率、处理时间、氧气流量、远程距离及有机污染物对灭菌效果的影响,并观察灭菌前后大肠杆菌的显微结构。结果表明在100W,60s,40cm3/min条件下,远程氧等离子体的杀菌效果值在距放电区0、20、40cm处分别为3.42、3.38和3.32。有机物浓度升高,灭菌效果急剧下降。结论为氧等离子体在距放电区040cm内均能有效灭活大肠杆菌,但有机污染物影响较大。氧等离子体场中高能粒子的刻蚀作用是导致细菌死亡的主要原因。     

钻井废泥浆中重金属化学形态及潜在生态效应评价

利用化学萃取法对江苏9个油田的不同类型钻井废泥浆的重金属化学形态分布特征进行调查分析,同时选用Hakanson的潜在生态危害指数法对钻井废泥浆中的重金属总量进行生态效应评价。结果表明,钻井废泥浆中Cu、Pb、Zn、Cd、Cr主要以残渣态和有机结合态为主,活性形态含量较低;采用Hakanson的潜在生态危害指数进行评价,发现Cu、Pb、Zn、Cd都属于轻微生态危害水平,而Cr多属于中等水平,产生潜在生态危害的重金属主要为Cr。     

微孔TiO2负载Pt吸附强化矿化甲苯的性能

矿化效率不足是光催化技术应用于挥发性有机化合物（VOCs）净化的关键限制因素之一。为了提高VOCs的矿化效率,制备了高比表面（736 m2·g-1）微孔TiO2材料,以其为载体构建了微孔TiO2与Pt的吸附强化光催化二元结构体系。采用比表面积（BET）、透射电镜（TEM）、X射线光电子能谱（XPS）等方法考察材料结构,并以甲苯为VOCs代表研究材料的吸附-光催化特性。结果表明,Pt修饰微孔TiO2表现出特异的吸附和催化能力,甲苯平衡吸附量和矿化效率分别是P25的3.8~4.1倍和2.6~2.9倍。微孔TiO2载体除了吸附强化作用外,其表面通过Pt修饰可产生大量表面羟基,从而利于Pt-TiO2的常温催化过程。     

釜溪河自贡城区段季节性低氧成因研究

釜溪河为沱江一级支流,在自贡城区段设有国考碳研所断面。收集碳研所断面近10年来水质自动站数据,分析溶解氧(DO)变化特征,采样调查釜溪河自贡城区段水质及河道底泥污染状况,采用相关性分析、数值模拟等,研究分析釜溪河自贡城区段溶解氧分布特征及碳研所断面季节性低氧成因。研究结果表明,碳研所断面的溶解氧质量浓度变化特征呈现春末夏初最低,白天高晚上低的特征。釜溪河碳研所断面河水耗氧类污染物质量浓度较沱江流域内其他断面高,耗氧强度较大,溶解氧质量浓度较沱江流域其他断面偏低;其次,研究河段中釜溪河污水厂以下河段受污水厂低氧水排入和金子凼堰底层低氧水下泄影响,其溶解氧水平整体较污水厂以上河段低;最后,河段底泥有机质含量较高,春夏季气温升高将导致微生物分解活性增强大量消耗溶解氧,同时,闸坝和外来水体排入的水文扰动造成污水厂以下河段水温梯度弱,表层溶解氧易受底层低氧水影响,促使断面形成季节性低氧现象。溶解氧预测模型结果也进一步证实了温度变化和垂向温度梯度弱是碳研所断面溶解氧质量浓度季节性偏低的主要因素。