Regulated emission characteristics of in-use LNG and diesel semi-trailer towing vehicles under real driving conditions using PEMS

On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH_4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH_4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.     

奎屯市区城市废水排污系统网络化的探讨

根据奎屯市区城市废水的排放量大、排污口多、污染物浓度高以及排污下水管道污水处理设施的建成现状等特点，提出了以污水处理厂为治理中心，市区排污管道网络化的改造设想、存在问题及对策。     

高级氧化技术机理及在水处理中的应用进展

综述了近年来发展迅速的高级氧化技术，主要包括Fenton法、臭氧氧化法、湿式氧化技术、超临界水氧化法、纳米光催化氧化法电化学催化降解法及超声降解法等。介绍了各种高级氧化技术的基本原理及在废水处理中的应用进展，并对其特点进行了评述。     

高级氧化技术在有机废水处理中的研究与应用

高级氧化技术在有机废水处理领域的研究近年来异常活跃。文章介绍了UV/O3、H2O2/O3、UV/H2O2/O3、US/O3等几种典型的高级氧化技术,阐述了各种高级氧化技术降解有机废水的机理、工艺流程以及在水处理中的应用进展。分析并指出了高级氧化技术研究的热点及今后的主要发展方向。     

氧化沟在炼油污水处理中应注意的几个问题

通过对氧化沟工艺处理炼油污水效果的分析，提出影响处理效果的各种因素，并探讨对策及建议。     

水解-好氧系统处理生活污水的特性研究

采用新型 Yakult填料和中心导流式曝气方式 ,设计制作了新型生活污水净化装置 ,试验表明 ,停留时间 16 h左右 ,CODCr去除率 >80 % ,BOD5去除率 >90 % ,SS去除率 >85 % ,NH3 - N去除率 >87% ,出水水质达到国家一级排放标准     

A2/O工艺处理氨纶废水的应用研究

介绍了采用厌氧-缺氧-接触氧化(即A2/O)组合工艺处理氨纶生产废水的流程和设计参数,通过近半年的调试数据,反应季节对A2/O组合工艺处理氨纶生产废水的影响和可行性。提出运行过程中需要控制的参数,提供设计和运行参考。     

江宁开发区污水处理厂二期调试运行

江宁开发区污水处理厂建设规模为4万m^3／d，分两期建成，采用氧化沟处理工艺，污泥处理采用不经消化的带式脱水工艺。在此主要叙述了各工艺构筑物的设备配置、功能、设计参数及二期工程的试运行情况。     

胰岛素废水处理工程设计

针对某医药公司在制取胰岛素过程中产生的高浓度废水，采用预处理（酒精回收-盐水投配-除油）-倒A2O-接触氧化-化学除磷组合工艺进行调试，其处理效果明显，出水各项指标均能达标，同时对工艺中存在的缺陷进行了分析。     

制革废水的治理

介绍了采用调节—混凝沉淀—生物接触氧化工艺处理制革生产废水工程的设计调试运行结果。从运行效果看该工程因地制宜，投资省，运行费用低，处理效果好，出水可达到排放标准。