后张梁管道摩阻损失测试技术与数据处理

针对常规测试中存在的问题 ,改进了管道摩阻损失的测试方法 ,消除了喇叭口等因素影响 ,使得管道摩阻测试更加合理和准确。介绍了后张法预应力管道摩阻损失的计算 ,结合秦沈客运专线双线整孔简支箱梁的管道摩阻损失测试 ,利用最小二乘原理对测试数据进行处理 ,得到了摩阻系数 μ和k的计算公式 ,所得参数为施工提供了依据。最后讨论了摩阻系数对张拉控制应力的影响 ,提出现场测试的一般性原则和要求。     

Development of controlled release nanoformulations of carbendazim employing amphiphilic polymers and their bioefficacy evaluation against Rhizoctonia solani

Controlled release nanoformulations of carbendazim (Methyl 1H-benzimidazol-2-ylcarbamate), a systemic fungicide, have been prepared using laboratory synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers. The release kinetics of carbendazim from developed controlled release (CR) formulations was studied and compared with that of the commercially available 50% Wettable Powder (WP). Further, the bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Rhizoctonia solani by the poison food technique method. The release of maximum amount of carbendazim from developed formulations was dependent on the molecular weight of PEGs and was found to increase with increasing molecular weights. The range of carbendazim release was found to be between 10th to 35th day as compared to commercial formulation which was up to 7th day. The diffusion exponent (n value) of carbendazim in water ranged from 0.37 to 0.52 in the tested formulations. The half-release (t_1/2) values ranged between 9.47 and 24.20 days, and the period of optimum availability (POA) of carbendazim ranged from 9.15 to 26.63 days. Also, ED₅₀ values of the developed formulations vary from 0.40 to 0.74 mg L^?1. These formulations can be used to optimize the release of carbendazim to achieve disease control for the desired period depending on the matrix of the polymer used.     

Insect habitat management in pasture systems

Two important habitat management strategies in pasture systems involve controlled burning and effective grazing manipulation schemes to maintain native climax grassland vegetation These climax grasslands have historically suffered less insect pest pressure than imported systems However, these types of grasslands are difficult to reestablish after relatively severe disruption by man Also, the proper diversity and stability is difficult to capture in developing imported systems. Imported pastures can exhibit substantial yields per land unit but are often composed of vegetation that rapidly mines nutrients stored by the native vegetation, and often need considerable inputs of fossil fuel, manufactured fertilizers and pesticides, because they are or become very susceptible to pestiferous insects. Habitat manipulation efforts can be effective in regulating forage pest populations below economic levels in imported pasture systems Such efforts include: 1) land use (coupled with plant diversity, grazing, and harvest manipulations), 2) sanitation (including controlled burning), 3) planting dates and harvest times (including grazing manipulations), 4) tillage methods, 5) fertilization, 6) trap crops, 7) water management, and 8) fire management for insect pest suppression and augmentation of natural enemies.     

城市控制爆破工程的爆破事故和爆破公害研究

爆破事故和爆破公害是关于爆破工程中的安全问题 ,笔者对爆破事故中的早爆、拒爆和爆破公害中的爆破振动、爆破空气冲击波、爆破飞石进行了详细论述 ,分析了爆破事故及公害产生的原因 ,从而给出了相应的防止措施 ;进而依法采取了爆破安全管理可行办法     

Preparation of controlled nano-MgO and investigation of its bactericidal properties

Nano-MgO is a good bactericide but with strong alkalinity in water due to its rapid hydrolysis. To control its hydrolysis rate and keep its bactericidal properties, we synthesized nano-MgO microspheres using chitosan-alginate system in this study. The synthesized nano-MgO release-controlled microspheres (nMgO-RCM) were with 0.98-1.20 mm of particle sizes. Also, their embedding ratio and loading percentage was 63.52% and 12.27%, respectively. Based on the characterization results, nano-MgO was only observed on surface of the nMgO-RCM. Its release rate from the nMgO-RCM could be controlled by the chitosan-alginate system, and the observed rate constant (k_obs) increased from 0.0289 h⁻¹ to 0.0358 h⁻¹ with the increment of the dosage from 10 mg L⁻¹ to 80 mg L⁻¹. Furthermore, the nMgO-RCM could maintain pH value lower than 8.5 and colony counts less than 20 CFU mL⁻¹ for at least 120 h.     

Application of encapsulation (pH-sensitive polymer and phosphate buffer macrocapsules): a novel approach to remediation of acidic ground water

Macrocapsules, composed of a pH-sensitive polymer and phosphate buffer, offer a novel remediation alternative for acidic ground waters. To test their potential effectiveness, laboratory experiments were carried out followed by a field trial within a coal pile runoff (CPR) acidic contaminant plume. Results of traditional limestone and macrocapsule treatments were compared in both laboratory and field experiments. Macrocapsules were more effective than limestone as a passive treatment for raising pH in well water from 2.5 to 6 in both laboratory and field experiments. The limestone treatments had limited impact on pH, only increasing pH as high as 3.3, and armoring by iron was evident in the field trial. Aluminum, iron and sulfate concentrations remained relatively constant throughout the experiments, but phosphate increased (0.15-32 mg/L), indicating macrocapsule release. This research confirmed that macrocapsules may be an effective alternative to limestone to treat highly acidic ground water.     

Release Characteristics of Nutrients from Polymer-coated Compound Controlled Release Fertilizers

Reliable information regarding release characteristics of nutrients from a polymer-coated controlled release fertilizer (CRF) is essential for beneficial agronomic and environmental results. Significant knowledge regarding nitrogen release from polymer-coated urea was gained while the information regarding the release of the different nutrients contained in polymer-coated compound N–P–K CRF remains limited. An experiment in which major factors affecting the differential release of nutrients from two coated compound CRF was performed in free water, water saturated sand and sand at field capacity. In general, nitrate release was the fastest, followed by ammonium and potassium whereas phosphate was significantly slower, with a rate of linear release in free water 45–70% slower than that of nitrate. Little differences were obtained for the lag periods of nitrate, ammonium and potassium release (2–10 days) under the experimental conditions, whereas for P they were one order of magnitude larger. The main factor slowing the release was assumed to be the lower solubility of ions with P being the least soluble. Release into free water was, expectedly, somewhat faster than that into saturated sand and significantly faster as compared to sand at field capacity and particularly so for P. Raising the temperature from 20 °C to 40 °C increased the rate of linear release of the different nutrients. The energy of activation, EA_rel, estimated for the linear release, of the different nutrients, was narrow ranging between 37 to 46 (KJ mol⁻¹) whereas the mean values obtained for the two CRF, differing by 50% in coating thickness, was non-significant. However, EA_rel was significantly different in different media. The complex effect of temperature on the lag period and nutrient interactions during release deserve further investigation.     

Removing ammonia from air with a constant pH,slightly acidic water spray wet scrubber using recycled scrubbing solution

Slightly acidic solutions are a practical means of removing ammonia from air Scrubbed NH₃ accumulates in solution as NH₄⁺ and should be an excellent fertilizer Increased air velocity decreased NH₃ removal and increased NH₄⁺ collection Previous research on wet scrubbers has only studied highly acidic scrubbing solutions because of their high ammonia capture efficiencies; however, the high acidity created practical problems. Lower acidity solutions would reduce corrosion, maintenance, and cost; however, designers may need to use strategies for increasing scrubber effectiveness, such as using lower air velocities. The objective of this study was to determine if a spray scrubber with slightly acidic and higher pH scrubbing solution (pH from 2 to 8) could effectively remove NH₃ from NH₃ laden air (such as animal building exhaust air), and also collect this valuable resource for later use as a fertilizer. A bench-scale spray wet scrubber treated 20 ppmv NH₃/air mixture in a countercurrent contact chamber. First, the solution pH was varied from 2 to 8 while maintaining constant air velocity at 1.3 m·s⁻¹. Next, air velocity was increased (2 and 3 m·s⁻¹) while solution pH remained constant at pH6. At 1.3 m·s⁻¹, NH₃ removal efficiencies ranged between 49.0% (pH8) and 84.3% (pH2). This study has shown that slightly acidic scrubbing solutions are a practical means of removing ammonia from air especially if the scrubber is designed to increase collisions between solution droplets and NH₃ molecules. The NH₃ removed from the air was held in solution as NH₄⁺ and accumulates over time so the solution should be an excellent fertilizer.     

聚合物燃烧放热的通风

本文在小尺寸试件燃烧实验的基础上,着重研究了几种典型聚合物燃烧时放热参数的变化规律及其通风影响,通过实验数据的拟合和分析,揭示了燃烧放热、通风条件和燃料种类之间复杂的关系,给出了由放热参数决定的可燃性区域,得到了一些新的结论,有助于材料放热特性认识和室内火分析的进一步深入。     

Eco-friendly PEG-based controlled release nano-formulations of Mancozeb: Synthesis and bioefficacy evaluation against phytopathogenic fungi Alternaria solani and Sclerotium rolfsii

Controlled release (CR) nano-formulations of Mancozeb (manganese-zinc double salt of N,N-bisdithiocarbamic acid), a protective fungicide, have been prepared using laboratory-synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers without using any surfactants or external additives. The release kinetics of the developed Mancozeb CR formulations were studied and compared with that of commercially available 42% suspension concentrate and 75% wettable powder. Maximum amount of Mancozeb was released on 42nd day for PEG-600 and octyl chain, PEG-1000 and octyl chain, and PEG-600 and hexadecyl chain, on 35th day for PEG-1000 and hexadecyl chain, on 28th day for PEG-1500 and octyl chain, PEG-2000 and octyl chain, PEG-1500 and hexadecyl chain, and PEG-2000 and hexadecyl chain in comparison to both commercial formulations (15th day). The diffusion exponent (n value) of Mancozeb in water ranged from 0.42 to 0.62 in tested formulations. The half-release (t_1/2) values ranged from 17.35 to 35.14 days, and the period of optimum availability of Mancozeb ranged from 18.54 to 35.42 days. Further, the in vitro bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Alternaria solani and Sclerotium rolfsii by poison food technique. Effective dose for 50% inhibition in mgL^?1 (ED₅₀) values of developed formulations varied from 1.31 to 2.79 mg L^?1 for A. solani, and 1.60 to 3.14 mg L^?1 for S. rolfsii. The present methodology is simple, economical, and eco-friendly for the development of environment-friendly CR formulations of Mancozeb. These formulations can be used to optimize the release of Mancozeb to achieve disease control for the desired period depending upon the matrix of the polymer used. Importantly, the maximum amount of active ingredient remains available for a reasonable period after application. In addition, the developed CR formulations were found to be suitable for fungicidal applications, allowing use of Mancozeb in lower doses.