螯合纤维的合成及其吸附重金属离子的研究

研究了含有胺肟基和胺腙基功能纤维的合成、结构表征和螯合性能。新型合纤维对多种重金属离子具有良好的吸附性能，能从被污染的水体和土壤中去除重金属离子，经洗脱后可回收金属，螯合纤维能反复使用。     

袋式除尘器在立窑烟气除尘中的应用

对立窑烟尘排放特点与立窑除尘工艺中的问题及对策进行了讨论。分析了立窑烟尘排放特征,对几种常见的立窑除尘的设备和工艺进行了比较,指出袋式除尘器可成功地用于立窑烟气除尘。并且从滤料选择、清灰方式、烟温控制、灰斗的气密性等方面详细地完善了袋式除尘器在立窑烟气除尘中的应用。     

A2/O工艺处理氨纶废水的应用研究

介绍了采用厌氧-缺氧-接触氧化(即A2/O)组合工艺处理氨纶生产废水的流程和设计参数,通过近半年的调试数据,反应季节对A2/O组合工艺处理氨纶生产废水的影响和可行性。提出运行过程中需要控制的参数,提供设计和运行参考。     

Solvent design and inherent safety assessment of solvent alternatives for palm oil recovery

The concept of inherent safety is important in developing an inherently safer and user-friendly process. This paper discusses a new integrated approach of computer-aided product design and inherent safety assessment. Computer-aided Molecular Design (CAMD) approach was utilized in this work to identify potential alternative to n-hexane, the widely used industrial solvent in extracting residual palm oil from pressed palm fibre. The formulation of solvent mixtures was optimized to meet the targeted physical properties before being tested using the Soxhlet Extraction method. Inherent safety assessment to assess the solvent's flammability, toxicity, reactivity, and explosiveness was conducted on the new solvent mix, Mixture 1 (n-hexane + ethanol), Mixture 2 (n-hexane + acetone) and Mixture 3 (n-hexane + n-butanol). It was found that Mixture 1 and 3 are safer than n-hexane and able to extract more oil than n-hexane and Mixture 2. However, the utilization of the solvent is dependent on the end product from the residual palm oil.     

静电布袋复合式除尘器及其应用

介绍了静电布袋复合式除尘器的结构、材料及除尘原理;布袋除尘器在不同工况下的除尘效率、附加脱硫率、阻力和排放浓度等参数的测试结果;利用布袋除尘器改造静电除尘器时的改造方案、运行中应注意的问题.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

Effect of Monosodium Methanarsonate Application on Cuticle Wax Content of Cocklebur and Cotton Plants

Leaf cuticle waxes were extracted from monosodium methanearsonate (MSMA)-resistant (R) and -susceptible (S) common cocklebur (Xanthium strumarium L.) and cotton (Gossypium hirsutum L.) plants at 0, 3, 5, and 7 days after treatment (DAT) following 1× and 2× MSMA applications. Wax constituents were analyzed by gas chromatography (GC) with flame ionization detection and compared to alkane and alcohol standards of carbon lengths varying from C21 to C30. Differences in waxes were calculated and reported as change per ng mm^2–1. Tricosane (C23) was found to increase following MSMA applications. All other alkanes decreased by 7 DAT, with some showing a linear effect over time in the R-cocklebur. Alcohol constituents were also observed to decrease by 7 DAT. Total arsenic in the extracted wax fraction was determined, with greatest quantities detected in the R-cocklebur. Wax changes are not believed to play a role in cotton tolerance, since changes in cuticle concentrations were minimal. Cocklebur resistance to MSMA is not due to cuticle constituents; the wax changes are a secondary effect in response to herbicide application.     

Organochlorine pesticides in soil under irrigated cotton farming systems in Vertisols of the Namoi Valley, north-western New South Wales, Australia

Organochlorine pesticides (OCPs) such as DDT and DDE have been detected in the surface 0.2 m of Vertisols in the lower Namoi Valley of north western New South Wales, Australia even though they have not been applied to crops since 1982. However, their presence in the deeper soil horizons has not been investigated. The objective of this study was to determine if OCPs were present to a depth of 1.2 m in Vertisols under irrigated cotton farming systems in the lower Namoi Valley of New South Wales. Soil was sampled from the 0-1.2 m depths in three sites, viz. the Australian Cotton Research Institute, ACRI, near Narrabri (149°36′E, 30°12′S), and two cotton farms near Wee Waa (149°27′E, 30°13′S) and Merah North (149°18′E, 30°12′S) in northern New South Wales, Australia. The OCPs detected and their metabolites were α-endosulfan, β-endosulfan, endosulfan sulphate, DDD, DDE, DDT and endrin. The metabolite DDE, a breakdown product of DDT, was the most persistent OCP in all depths analysed. Endosulfan sulphate was the second most persistent followed by endrin > α-endosulfan > β-endosulfan > DDT and DDD. DDT was sprayed extensively in the lower Namoi Valley up to the early 1980s and may explain the persistence of DDE in the majority of soil samples. Dicofol and Dieldrin, two OCPs previously undocumented in Vertisols were also detected. The movement of OCPs into the subsoil of Vertisols may occur when irrigation or rain transports soil colloids and organic matter via preferential flow systems into the deeper layers of a soil profile. Persistence of OCPs was closely correlated to soil organic carbon concentrations. The persistence in soil of OCP’s applied to cotton crops grown more than two decades ago suggests that they could enter the food chain. Their presence at depths of 1.2 m suggests that they could move into groundwater that may eventually be used for domestic and stock consumption.     

改性纤维球处理炼油废水的应用研究

通过用改性纤维球处理炼油废水的试验,对纤维球过滤技术的处理效果和反冲洗特性进行了详细的研究,试验结果表明,炼油废水经处理后,出水中油的含量小于4 mg/L、悬浮物含量小于6 mg/L,出水可达标排放,并且经过改性后的纤维球在含油废水处理中可以通过反冲洗再生并重复使用.