青藏高原多年冻土区铁路路堤变形特征研究

路堤的稳定是公路、铁路等行车安全的保证。路堤变形通过路基—轨道—车辆大系统的相互作用而影响行车安全。冻胀、融沉是多年冻土地区路堤变形的重要形式。多年冻土区的路基变形问题是至今仍未彻底解决的一大难题。青藏铁路穿越 5 5 0km多年冻土区 ,为研究多年冻土区路堤变形特征 ,笔者对青藏铁路某试验段进行变形监测并对监测数据进行分析。结果表明铁路路堤的修建改变了多年冻土原来的水热平衡 ,天然冻土上限的变化导致路堤产生变形。同时 ,变形特征还受路堤边坡的坡向、降水量和地基土类型等因素的制约。在此基础上 ,提出几点减少多年冻土区铁路路堤变形的一些看法和建议。     

复杂矿井通风系统角联风路自动识别方法的研究

角联风路的识别与稳定性分析是矿井通风系统稳定性与可靠性分析理论中的核心内容之一。笔者对通风系统角联风路进行了深入的研究;分析了通路法的局限性,简化了角联风路的数学模型,提出了快速、准确、灵活的角联风路自动识别的新方法——节点位置法;编写了角联风路自动识别软件,并应用现场数据进行测试,将其结果与通路法的结果进行了比较分析;证明了节点位置法是切实可行的。     

Development of Stream Water Chemistry during Spring Melt in a Northern Hardwood Forest

The role of snowmelt and subsurface hydrology in determiningthe chemistry of a small headwater stream in the TurkeyLakes Watershed (TLW) was evaluated for the spring meltperiods 1992 to 1996. Spring runoff is the dominanthydrological event at the TLW each year. Processesoccurring within the snowpack during snowmelt wereprincipally responsible for the above-ground changes inchemical fluxes relative to bulk deposition (the effect ofwinter throughfall was minimal). Large changes in chemicalfluxes occurred below ground. Organic matter decomposition,weathering, nitrification, and element cycling are some ofthe more important below-ground processes that operateduring the snow accumulation and ablation season and controlthe composition of the water ultimately appearing in thestream. Maximum stream discharge was accompanied byelevated concentrations of H⁺, NO₃ ^-, K⁺,NH₄ ⁺, DOC, Al and Mn, but reduced levels ofCa²⁺, Mg²⁺, SO₄ ^2- and SiO₂. Theconcentration-discharge relationships were consistent withwater movement through and above the forest floor duringpeak discharge, a flowpath facilitated by rapid infiltrationof meltwater and the existence of a relatively impermeablelayer in the mineral soil creating a perched water table. Averaged over the five periods of snow accumulation andablation, it was estimated that pre-melt stream flow, andwater routed through the forest floor and through the uppermineral soil contributed 9, 28 and 63%, respectively, ofthe discharge measured at the outlet of the catchment. Theforest floor contribution would be greater at peak dischargeand at higher elevations. An end-member mixing modelestimated concentrations of SO₄ ^2-, NO₃ ^-,Cl^-, Ca²⁺, Mg²⁺, Na⁺ and Al that werecomparable to average values measured in the stream. Othervariables (NH₄ ⁺, H⁺, K⁺ and DOC) wereover-estimated implying retention mechanisms operatingoutside the model assumptions.     

地表移动与变形预计在矿山开发项目环境影响评价中的应用

阐述了地表移动与变形预计理论在矿山开发项目环境影响评价工作中的必要性，着重介绍了典型曲线预计法建立的方法及预计的步骤．     

圆锥形零件冲压成形过程分析

通过分析圆锥形零件变形毛坯上不同部分在成形中的作用,揭示了该类零件的冲压成形特点,得出了悬空侧壁部分的变形状态是该类零件成形的关键,而径向拉应力是实现侧壁部分成形的必要条件,同时也是这部分冲压成形成败的关键。为此,经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式,为进一步研究提供了理论基础。     

生态产品价值实现的理论研究与实践进展

生态产品价值实现是推动“绿水青山”向“金山银山”转化的关键路径,近年来成为研究习近平生态文明思想的热点领域。本文就生态产品价值的内涵理解、实现机理、主要路径及具体实践模式,梳理了近年来国内学者的研究成果,并在此基础上总结与分析,指出存在的问题、提出相关建议。对生态产品价值的理解,目前国内学者从早期的分歧已逐步形成统一的认识,即生态产品本质上是人类从自然生态系统中直接或间接获取的物质和服务的总称,其价值来自生态系统服务价值。生态产品价值实现则是其存在价值通过各种路径被人类消费或使用,最终转化为经济收益或是民生福祉的过程。生态产品价值实现的基本路径主要包括产业发展、市场交易、金融扶持、政府调控和社会参与5种方式,国内目前的实践案例则可以归类为15种模式。但各地在实践过程中也面临生态产品识别边界不清晰、生态产品价值实现机理认识不统一、配套机制不完善以及路径模式创新与实践不够等问题,后续应加快建立生态产品调查统计与评估核算方法体系、完善自然资源产权制度、加强实践模式创新与推广应用。     

聚能罩挤压成形工艺研究

介绍聚能罩挤压成形的工艺过程、变形特点,分析了挤压件尺寸精度的变化规律以及变形程度与机械性能的关系.     

基于力电耦合冲击矿压电磁辐射预测法的研究

笔者首先提出了煤岩变形破裂过程电磁辐射与应力耦合的概念 ,然后在实验研究、理论分析和数值模拟的基础上从力电耦合的角度研究了煤岩冲击矿压预测的电磁辐射法 (EME)。研究结果表明 :FLAC3D方法能对矿山巷道掘进过程煤岩内部应力场进行有效的数值模拟 ;电磁辐射信号主要来源于应力集中区 ,在场点监测到的电磁辐射信号主要是应力集中区煤岩变形破裂过程产生的 ;EME信号呈现出与煤岩内部应力变化相同的规律 ;利用力电耦合方法研究煤岩冲击矿压电磁辐射预测法是可行的。笔者最后还对未来煤岩冲击矿压电磁辐射预测法的研究进行了展望。     

影响大型复杂机械钢结构系统可靠性的因素分析

以结构力学为理论依据,以有限单元法为基础,借助和参考有关有限元程序设计方法,按照结构系统可靠性失效模式分析的要求,采用编程语言研制成功基于有限元的可靠性分析软件RAPS(Reliability Analysis Program of Structure based on FEM),运用该软件对立体车库钢结构的可靠性进行具体的分析;对判定结构系统失效与否的失效准则进行讨论和分析,并针对立体车库钢结构,得出合理的失效准则和系统可靠度的计算方法;通过实例说明约界参数CAP、失效路径长度和系统复杂程度对失效准则和系统可靠度结果的影响。     

Importance of movement constraints in habitat selection studies

The aim of this study is to empirically illustrate the importance of taking movement constraints into account when testing for habitat selection with telemetry data. Global Positioning System relocations of two Scandinavian brown bears were used to compare the results of two different tests of habitat selection by the bears within their home range. Both relied on the comparison of observed dataset with datasets simulated under the hypothesis of random habitat use. The first analysis did not take movement constraints into account (simulations were carried out by randomly distributing a set of points in the home range) whereas the second analysis accounted for these constraints (simulations were carried out by building random trajectories in the home range). The results for the two analyses showed contrasted results. Therefore, not accounting for movement constraints in analyses may result in a misleading biological interpretation. Autocorrelation between relocations is not undesirable: it contains information about ecological processes that should be integrated in habitat selection analyses.