分光光度法测定染色废水的色度

为消除测定染色废水色度的主观误差，采用分光光度法测定染色废水的色度，与稀释倍数法相比，具有精确，重现性好，适用范围广等特点，ＰＨ值对色度的测定有明显影响，控制ＰＨ值为７．６０，测定色度具有可比性。     

水泥负载TiO2光催化降解染料水溶液的研究

研究了以ＴｉＯ２为催化剂，且将ＴｉＯ２涂布在模拟工业水处理浅池的水泥质池底表面，以直管高压汞灯为光源，对有机染料酸性玫瑰红Ｂ和晒化绿Ｂ进行光催化降解的可行性。结果表明，在实验条件下，本系统对以上染料有显著的光降解作用，浓度为２５ｍｇ／Ｌ的上述二种染料溶液，经３０ｍｉｎ光照，其降解率分别达８８．２％，此外，还探讨了染料浓度，染料体积、染料溶液ＰＨ值等因素对光降解的影响。     

染料废水的治理现状及展望

介绍了染料废水的处理现状,目前国内外主要的处理方法有物化法(常用的有吸附法、混凝法、膜技术等)、化学法(如氧化法、电解法等)和生化法(投菌法微生物降解,好氧/厌氧工艺),介绍了各种工艺方法处理染料废水的实例并指出了各方法的优缺点和技术的关键,最后对今后染料废水处理技术的发展进行了展望。     

In-situ synthesis of TiO2 rutile/anatase heterostructure by DC magnetron sputtering at room temperature and thickness effect of outermost rutile layer on photocatalysis

TiO_2 rutile/anatase heterostructure thin films with varying rutile thickness have been in-situ synthesized via DC magnetron sputtering with Ar gas at room temperature. The crystal texture, surface morphology, energy gap and optical properties of the films have been investigated by X-ray diffraction meter, grazing incidence X-ray diffraction meter, Raman spectroscopy, scanning electron microscopy, and UV–visible spectrophotometer, which indicates that the rutile/anatase heterostructure films are successfully fabricated. The further degradation experiments display that the photocatalytic activity can be dramatically affected by the thickness of the outmost rutile layer and the 100 nm thickness exhibits the best performance in all of the TiO_2 thin films. With the increase of the outmost rutile layer, the optical band gap of TiO_2 film displays a systematic decrease slightly. However,the change in photocatalytic activity does not coincide with that in the band gap. The photoresponse and electrochemical properties of the thin films have been characterized to understand the mechanism of the varied photocatalytic activity.     

染料废水处理技术现状与发展

介绍了染料废水的物理、化学和生物处理技术,分析了其去除原理和工艺优缺点,提出了未来染料废水处理技术的发展走向——高效、经济、适应性强、清洁性的废水处理技术。     

UV/H_2O_2/草酸高铁铵体系中孔雀石绿的光降解研究

研究了UV/H2O2/草酸高铁铵体系下孔雀绿(Malachite green,MG)光降解过程中的影响因素,包括MG的初始浓度、初始pH值、投加H2O2浓度和草酸高铁铵浓度等。结果表明:MG初始浓度越低光降解越快,碱性条件有利于MG的降解,其最佳降解pH为11.0;随H2O2浓度的增加,MG降解率先增加后减少,在100mmol/L时,降解率最高;MG降解率随草酸高铁铵浓度增加而增加,于10.0mmol/L时MG降解率最高;UV/H2O2/草酸高铁铵体系的降解效果较强,交叉实验结果表明H2O2:草酸高铁铵浓度比在1～20:1时降解率均高于。因此该体系具有快速、简单、经济并高效率等特点,可应用于染料废水的降解和脱色工艺中。     

两类微生物燃料电池治理硝酸盐废水的实验研究

采用二氧化铅阴极单室微生物燃料电池(MFC)和双室MFC,以葡萄糖为唯一电子供体,系统研究了两类微生物燃料电池的产电性能和去除硝酸盐的情况.结果表明,双室MFC闭合后,阳极室降解葡萄糖产生的电子可通过外电路传递到阴极,在生物的作用下,NO3--N得到电子被还原,平均反硝化速率达3.77 mg·L-1·d-1.双室MFC...     

Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K_cpx) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min⁻¹ was drawn. This relationship predicts that CDs with K_cpx < 180 M⁻¹ are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.