Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.     

哈密地区环境中^220Rn子体α潜能浓度所致居民剂量估算

用ＳｔｒａｎｄｅｎＥ．推荐的测量方法对哈密地区环境空气中２２０Ｒｎ子体α潜能浓度测量结果表明，室内、外平均值分别为５６．１和１０．２（×１０－７Ｊ·ｍ－３）。室内外２２０Ｒｎ／２２２Ｒｎ子体α潜能浓度比值分别为０．８４和０３２。２２０Ｒｎ子体所致居民有效剂量当量为２２８μＳｖ·ａ－１（集体有效剂量当量为０．９×０２ｍａｎ·Ｓｖ）。     

EM菌强化SBR脱氮除磷的试验研究

重点讨论了有效微生物群（EM）在SBR反应器中对生活污水的TP，NH3－N和TN和TN的去除效昆，结果表明，当EM投加量（VEM／V污水）为1／1000－1／1000时，能显著提高SBR工艺对TP，NH3－N和TN的去除率和降解速度，具有节能降耗的优点，当EM投加量（VEM／V污水）在1／1000－5／1000范围内，TN的去除率随EM量的增加而逐渐提高。     

Conditions controlling the onset of breeding migration of the Japanese mountain stream frog, <Emphasis Type="Italic">Rana sakuraii</Emphasis>

I studied the conditions controlling the timing of breeding migration of the Japanese mountain stream frog Rana sakuraii, an explosive breeder, over 9 years (1992, 1993 and 1999–2005). I analysed two factors: the daily cumulative temperature (DCT) during hibernation and the triggering temperature on the day of migration onset. Frogs hibernated in shallow running water in streams in December. A total of 53,155 breeding migrating adults were captured by traps. Every year, breeding migration was induced by a rise in daily maximum water temperature to about 5°C. However, its date was limited to 1 February at the earliest, and the onset needed a DCT (from 20 January, using 3°C as the threshold for daily effective temperature) of at least about 15°C. Earlier (e.g. in mid- or late January), even if the maximum temperature rose to 5–8°C, migration did not begin. Moreover, even in early February, if the maximum temperature rose to 5°C, if it had been too cold in January and the DCT was low, migration would not begin until mid- or late February. Thus, the earliest date of readiness for migration varied from 1 February to mid-February, depending on the winter DCT. Logistic regression analyses showed that both factors, the DCT and the daily temperature, were significant. I propose that in temperate-zone amphibian explosive breeders, both the passing of an essential number of days and an essential DCT during hibernation are prerequisites for the onset of breeding migration before the daily temperature rises to the threshold.     

环境检测机构人员培训工作探讨

环境检测人员培训在整个生态文明建设中发挥着至关重要的作用,本文从培训计划、培训内容、培训方式、有效评价和记录归档五个方面探讨了环境检测机构人员培训工作流程,以确保机构行之有效地开展人员培训。     

地下水开发引起的环境问题与治理

随着社会经济的飞速发展,人民生活对水资源的需求量日益增加,水资源开发已然成为备受社会各界关注的一项话题。而若是未能重视资源开发合理性与适宜性,必然会造成一定的环境污染。本文阐述了我国水资源开发与利用现状,分析了地下水开发引起的环境问题,并探究了新形势下治理地下水开发环境问题的有效对策。     

Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis

This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses.     

Deposition of gamma emitters from Chernobyl accident and their transfer in lichen–soil columns

Lichen–soil column samples were taken from several locations in the Southern Finland between 1986 and 2006. Columns were divided into three parts, upper lichen, lower lichen and underlying soil, and their gamma emitting radionuclides, ¹³⁴Cs, ¹³⁷Cs, ¹⁰³Ru, ⁹⁵Zr, ¹⁰⁶Ru, ^110mAg, ¹²⁵Sb and ¹⁴⁴Ce, were measured with gamma spectrometry. Deposition values were calculated as Bq/m² for each sampling site. Distribution of various radionuclides in the three compartments as a function of time was determined. Both effective and ecological half-lives of all radionuclides were calculated for upper lichen, whole lichen and whole lichen–soil column. A linear relation was derived between the physical half-lives and effective half-lives for whole lichen and for whole lichen–soil column. Reindeer meat activity concentrations of various radionuclides and ensuing radiation doses to reindeer-herding people were also estimated for a hypothetical case where a similar high radioactive pollution, as was taken place in the Southern Finland, would have occurred in the reindeer-herding areas in the Finnish Lapland.     

Effect of AlCl3 concentration on nanoparticle removal by coagulation

In recent years, engineered nanoparticles, as a new group of contaminants emerging in natural water, have been given more attention. In order to understand the behavior of nanoparticles in the conventional water treatment process, three kinds of nanoparticle suspensions, namely multi-walled carbon nanotube-humic acid (MWCNT-HA), multi-walled carbon nanotube-N,N-dimethylformamide (MWCNT-DMF) and nanoTiO₂-humic acid (TiO₂-HA) were employed to investigate their coagulation removal efficiencies with varying aluminum chloride (AlCl₃) concentrations. Results showed that nanoparticle removal rate curves had a reverse “U” shape with increasing concentration of aluminum ion (Al^3 +). More than 90% of nanoparticles could be effectively removed by an appropriate Al^3 + concentration. At higher Al^3 + concentration, nanoparticles would be restabilized. The hydrodynamic particle size of nanoparticles was found to be the crucial factor influencing the effective concentration range (ECR) of Al^3 + for nanoparticle removal. The ECR of Al^3 + followed the order MWCNT-DMF > MWCNT-HA > TiO₂-HA, which is the reverse of the nanoparticle size trend. At a given concentration, smaller nanoparticles carry more surface charges, and thus consume more coagulants for neutralization. Therefore, over-saturation occurred at relatively higher Al^3 + concentration and a wider ECR was obtained. The ECR became broader with increasing pH because of the smaller hydrodynamic particle size of nanoparticles at higher pH values. A high ionic strength of NaCl can also widen the ECR due to its strong potential to compress the electric double layer. It was concluded that it is important to adjust the dose of Al^3 + in the ECR for nanoparticle removal in water treatment.     

Effect of density-driven flow on the through-diffusion experiment

Diffusion is one of the main mechanisms of solute transport in pore water of geologic media. The effective diffusion coefficient of a solute in a rock is usually measured by the through-diffusion experiment. However, in this experiment, the effect of advection, induced by density difference between dense aqueous solution and pure water, has not been considered. To evaluate the effect of density-driven flow, a through-diffusion experiment using Fontainebleau sandstone was conducted for KCl and KI aqueous solutions with various densities. The measured effective diffusion coefficients were positively correlated with the density difference; the effective diffusion coefficient of a 1 M KI solution (density difference, 0.119 g/cm³) was one order of magnitude larger than that of a 0.1 M KCl solution (density difference, 0.005 g/cm³). The result is explained by a theoretical model using a diffusion–advection equation including Darcy's law. Based on the theory, a diagram to evaluate the condition at which the measured effective diffusion coefficient does not include the effect of advection is presented.