Differences and similarities of gas and dust explosions: A critical evaluation of the European ‘ATEX’ directives in relation to dusts

Explosive gas mixtures and explosive dust clouds, once existing, exhibit similar ignition and combustion features. However, there are two basic differences between dusts and gases which are of substantially greater significance in design of safety standards than these similarities. Firstly, the physics of generation and up-keeping of dust clouds and premixed gas/vapour clouds are substantially different. This means that in most situations where accidental explosive gas clouds may be produced quite readily, generation of explosive dust clouds would be highly unlikely. Secondly, contrary to premixed gas flame propagation, the propagation of flames in dust/air mixtures is not limited only to the flammable dust concentration range of dynamic clouds. The state of stagnant layers/deposits offers an additional discrete possibility of flame propagation.

The two European Directives 94/9/EC (1994) and 1999/92/EC (1999) primarily address gases/vapours, whereas the particular properties of dusts are not addressed adequately. Some recent IEC and European dust standards resulting from this deficiency are discussed, and the need for revising the two directives accordingly is emphasized.     

铁矿区采空区勘测及其危害评价研究

本文采用野外勘测、理论分析和定量计算相结合的技术路线,研究了采空区分布及参数的高密度电法勘测方法、采空区对地表的影响程度和地表移动区的范围的定性定量评价方法,研究结果可以作为政府进行矿区安全生产综合整治和安全规划的科学决策依据.     

废弃电池能否进入废弃电器电子产品处理目录（第二批）管理的筛选评估分析

2009年2月,国务院发布《废弃电器电子产品回收处理管理条例》,成为我国废弃电器电子产品回收处理的纲领性文件。在《废弃电器电子产品处理目录（第一批）》中,明确将电视机、电冰箱、洗衣机、房间空调器、微型计算机等5种产品纳入第一批目录。同时,为了为了能够及时、客观地与经济发展、技术进步以及电器电子产品行业的发展变化等相适应,《目录》管理委员会起草了《制订和调整废弃电器电子产品处理目录的若干规定》,明确随着经济发展变化及电子产品废弃形势调整电器电子产品处理目录的原则。废弃电池在近几年来在我国增长速度很大,将来的管理形势十分紧迫。本文在此分析我国几种废弃电池（铅酸电池、镍氢电池及锂电池）的产生量、再生处理处置情况及管理政策导向。并在目录一批筛选原则的基础上利用权重分析法,筛选评估废弃电池能否进入废弃电器电子产品处理目录（第二批）管理的可能,研究显示铅酸电池已具备进入管理目录的资质。     

我国电子废弃物的管理及发展道路研究

我国电子废弃物的处理处置正向产业化方向稳步推进。本文概括了电子废弃物的特点,以及我国目前处理电子废弃物的现状。遵照循环经济理念,并基于我国国情,提出了我国在电子废弃物处理处置过程中应遵循的主要原则和今后的发展方向。     

印染废水静电场处理机理分析

本文提出一种利用静电场的印染废水处理方法，印染废水中的污染颗粒在电场的作用下，朝一定的方向迁移，从而发生“强制电中和”作用，这种电中和作用的场能消耗极小，而被中和的污染物颗粒由于凝聚作用，则会不断长大而易于通令过滤去除，这一处理工艺在经“自数”预处理之后，可继续使COD和色度的去除百分数分别达60％和63％以上。     

Utilization of cement kiln dust (CKD) in cement mortar and concrete—an overview

Solid waste management is one of the major environmental concerns around the world. Cement kiln dust (KKD), also known as by-pass dust, is a by-product of cement manufacturing. The environmental concerns related to Portland cement production, emission and disposal of CKD is becoming progressively significant. CKD is fine-grained, particulate material chiefly composed of oxidized, anhydrous, micron-sized particles collected from electrostatic precipitators during the high temperature production of clinker. Cement kiln dust so generated is partly reused in cement plant and landfilled. The beneficial uses of CKD are in highway uses, soil stabilization, use in cement mortar/concrete, CLSM, etc.Studies have shown that CKD could be used in making paste/mortar/concrete. This paper presents an overview of some of the research published on the use of CKD in cement paste/mortar/concrete. Effect of CKD on the cement paste/mortar/concrete properties like compressive strength, tensile strength properties (splitting tensile strength, flexural strength and toughness), durability (Freeze–thaw), hydration, setting time, sorptivity, electrical conductivity are presented. Use of CKD in making controlled low-strength materials (CLSM), asphalt concrete, as soil stabilizer, and leachate analysis are also discussed in this paper.     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

锅炉房电气设备运行安全应注意的几个问题

对工业锅炉房电气设备及电缆敷设的设计和运行管理安全提出应注意的问题,并提出本质安全要求。     

Spatial variability in soil water and salinity in Tamarix community in a semiarid saline region of the upper Yellow River北大核心CSCD

Tamarix is widely distributed in semiarid saline regions of the upper Yellow River. The community of Tamarix affects the spatial distribution of soil water and salinity. It is important to explore the dynamic response relationship of Tamarix community and spatial distribution of soil water and salinity in order to evaluate the effects of vegetation community construction and ecological restoration in this region. The natural Tamarix community in the secondary saline-alkali land of the Ningxia Yellow River Irrigation Area was investigated in July 2016. Classical statistics and geostatistics were used to analyze the spatial distribution characteristics of soil water and salinity. The results showed that the soil water content was relatively low (1.98%-7.55%), whereas the soil salinity was high (average conductivity 10.28-25.38 mS/cm) in the study area. The variability coefficient range of soil water and salinity was 36.1%-83.7%, both with moderate variations. Furthermore, the variation degree of soil salinity decreased with the increase in soil depth. The soil water and salinity had obvious spatial structure characteristics, which was mainly affected by structural factors or structural factors associated with stochastic factors. The coefficients of nugget were 0.04%-49.88%, indicating the strong spatial correlation. The spatial distribution of soil water and salinity in Tamarix community showed a patchy pattern; the soil water and salinity distribution in the areas with high Tamarix growing density were considerably high. The correlation analysis showed that there was a positive correlation between soil water and salinity in the study area. In conclusion, soil water and salinity restrict the distribution and growth of Tamarix. Furthermore, the distribution and growth of Tamarix enhanced the spatial variability of soil water and salinity. Keywords. © 2018 Science Press. All rights reserved.     

Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.