Performance assessment system of health,safety and environment based on experts' weights and fuzzy comprehensive evaluation

Performance evaluation of Health, Safety and Environment (HSE) is the measurement of a company's achievement in HSE management. In order to receive a comprehensive and objective evaluation result, it is necessary to consider all evaluation factors and experts at different levels when HSE performance assessment is conducted. To improve conventional HSE performance evaluation, where weighted average method was used, a Fuzzy Comprehensive Evaluation (FCE) method is used in this study by taking experts' weights into account. Further, an HSE operating performance assessment system is designed to simplify manual and complex assessment process and generate charts and analysis reports automatically. Finally, a case of petrochemical enterprise is used to illustrate the effectiveness of the method and system.     

Development and evaluation of RAMP I – a practitioner’s tool for screening of musculoskeletal disorder risk factors in manual handling

RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1?h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.     

日喀则台观测环境存在的问题和解决办法

西藏日喀则地震台处于特殊的地理位置和地理环境，观测环境受到来自自然和人为因素的诸多干扰，本文剖析了各个干扰因素对观测环境影响，提出了一些具体而可行的解决办法。     

张道口-1井水位观测精度变化分析研究

本文对张道口-1井模拟水位、数字化水位观测精度进行了对比，进一步分析了影响数字化水位观测精度的几个因素，提出了数字化水位在日常观测中应注意的几个问题。     

欧拉观测的大气扩散参数计算方法探析及应用

根据湍流扩散统计理论，讨论了利用欧拉观测的风速资料求解正态扩散模式中大气扩散参数的计算方法及其实现，并以海南洋埔开关区各稳定度大气扩散参数的计算为实例作了分析。     

耐镉菌株的分离及其对Cd2+的吸附富集

采用梯度浓度驯化的方法,筛选分离出一株能高度耐镉和富集镉的菌株,初步鉴定为假单胞菌属(Pseudomonas sp.).该菌株在含Cd2+浓度4500mg/L的液体细菌培养基中能够生存,当Cd2+浓度为100mg/L时,pH值为6～8有利于提高菌株耐镉能力.Cd2+为低浓度时菌株积累Cd2+,菌体对Cd2+浓度为100mg/L的积累率达99.1%,冻干菌体对Cd2+的吸附量为8.786mg/g干菌体;当Cd2+浓度大于909mg/L时,菌体表现出外排Cd2+现象.红外分析和电镜观察表明,菌株细胞壁在吸附Cd2+中起重要作用,67.4%的Cd2+吸附在细胞壁上.     

印尼8.7级和8.5级强震后江苏体应变同震效应分析

2004年12月26日和2005年3月29日在印尼苏门答腊北部分别发生8.7级和8.5级强烈地震后,对江苏地区前兆体应变资料进行分析发现,在这两次地震的震后都记录到了显著的异常,且异常的表现形式各不相同。本文列出这些异常并浅析,以期对进一步深入研究印尼大震对我国未来地震趋势的影响有所帮助。     

土氡测量在地质灾害勘测中的干扰实验研究

对土氡勘测中来自测量过程、勘测场地条件、气象因素方面的常见干扰进行了实验研究，探讨了干扰机理，指出了定性及部分定量排除干扰的方法。     

HSE管理中的风险分析方法——以中油国际委内瑞拉公司HSE管理经验为例

HSE管理的出发点应是预防为主。因此尽早识别风险、评估可能的风险是HSE管理的关键。风险分析最重要的是要承认：石油勘探开发活动不可能绝对安全，风险总是客观存在的。风险分析就是尽早识别、分析和评估可能的风险所在、大小和频率。风险管理就是在风险分析的基础上，采取有针对性地措施将风险消减到可接受的水平。本文在总结近年国内外HSE管理中风险分析方法的基础上，结合CNPC在委内瑞拉运行石油项目的经验，提出了一套风险分析的定性和定量方法，包括系统风险分析、节点风险分析、概率统计分析等。由于大力推广和应用这些方法，使CNPC在委内瑞拉运行石油项目9年来没有发生任何HSE大事故，被委内瑞拉国家石油公司誉为“国际石油投资者HSE工作的典范”。     

旧路改造工程路堤稳定性安全监测方案设计

本文从旧路改造工程的特点出发,通过室内实验获取土力学参数并对沉降量进行预测计算.利用沉降仪、测斜管、孔隙水压力计、土压力盒等多种测试仪器,选取有代表性的观测断面,对经过土工格栅加筋处理的软土地基进行了高路堤施工期间的沉降与稳定观测,并提出适合工程特点的控制标准.从而达到控制路堤稳定、检验填筑质量、控制差异沉降、为路面施工提供技术支持的目的.