Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

垃圾焚烧烟气中HCl与消石灰的反应机理研究

测试了两种消石灰与垃圾焚烧烟气中HCl的反应率,得出了消石灰的反应率与反应时间的反应曲线,分析了消石灰与HCl的反应机理及影响消石灰最终反应率的因素。试验结果表明,消石灰与HCl反应初期按灰层扩散控制进行,两种消石灰的最终反应率分别为16％和36％。     

Study on Assessing Economic Vulnerability of Small Island Regions

The main purpose of this study is to assess economic vulnerability of small island development regions as part of their sustainability constraints. By combining economic and environmental time series data, we assessed a composite index of economic vulnerability which is constructed from three exogenous variables, namely economic exposure, economic remoteness, and economic impact of environmental and natural disasters. We used the Amami Islands, Kagoshima Prefecture, Japan as the case studies for this paper.The results indicated that using a gross island products based valuation index, Kikaijima is the most vulnerable island in the Amami Islands with a composite economic vulnerability index (CEVI) value of 0.678, while by using a per capita based index, Okinoerabujima is considered the most vulnerable island with a CEVI value of 0.680. From the results we also revealed that smaller islands have relative higher vulnerability than the bigger one, which also confirms some previous country-level vulnerability studies.However, it is matter of fact that some islands that have relatively high vulnerability also have good economic performance as shown by their per capita income. In this regard, it can be argued that the success of these small islands could have been achieved in spite of and not because of their inherent vulnerability conditions as an indicator of sustainability constraint. Regarding these findings, we also examined a comparison between vulnerability results and the preliminary concept of an island's resilience in order to capture another perspective on sustainability assessment in a small island region.     

某垃圾焚烧厂投产前后周边土壤二英类化合物的分布

为研究垃圾焚烧厂运行对周边土壤二英类化合物（PCDD/Fs）含量的影响,采集了珠三角地区某垃圾焚烧厂投产前和投产后周边土壤样品,分析研究了该垃圾焚烧厂运行对周边土壤中PCDD/Fs含量和组分的变化.结果表明:①2012年（投产前）珠三角地区某垃圾焚烧厂周边土壤PCDD/Fs含量较低,范围为163~591 ng/kg（毒性当量范围为0.198~0.863 ng I-TEQ/kg,I-TEQ为国际毒性当量因子折算的毒性当量值）;2017—2019年（投产后）周边土壤PCDD/Fs含量范围为151~1.75×103 ng/kg（毒性当量范围为0.812~3.88 ng I-TEQ/kg）,与其他研究相比处于较低的水平.②投产后,距该垃圾焚烧厂较近（1.5 km）的采样点（S1）土壤PCDD/Fs含量逐年增长,在较远（5.2 km）但人口较密集的采样点（S3）土壤PCDD/Fs含量整体较高,但呈逐年下降趋势.③投产后,土壤中的17种PCDD/Fs单体组分中,毒性当量贡献率最高的单体为八氯二苯并二英（OCDD）和2,3,4,7,8-五氯二苯并呋喃（2,3,4,7,8-PeCDF）,二者毒性当量贡献率范围为15.7%~45.4%.④在同一采样点土壤PCDD/Fs单体组分年间差异不明显,但同一年份不同采样点差异明显.研究显示,目前该垃圾焚烧厂周边土壤PCDD/Fs含量较低,但仍需要长期监测其可能带来的风险.      

温度和含水率对村镇垃圾焚烧烟气中有机物排放的影响

使用管式炉模拟村镇生活垃圾焚烧过程,研究不同焚烧温度和不同垃圾含水率条件下,村镇垃圾焚烧烟气中多环芳烃（PAHs）、氯苯及苯系物的生成和分布特性.结果表明,焚烧温度为550℃时,烟气中多环芳烃和氯苯的释放量最大,当温度小于550℃时,多环芳烃和氯苯的释放量随温度升高而增加,温度大于550℃时,多环芳烃和氯苯的释放量随温度升高而降低.高温焚烧不仅可以抑制烟气中多环芳烃的浓度及减少大分子量PAHs的排放,还能降低氯苯的释放量和氯代数,从而减小村镇垃圾焚烧烟气中的毒性;苯系物随着温度升高,由热解转变为高温合成,释放量也随着增加.水分对多环芳烃和氯苯有较大影响,对苯系物的影响较小.在400℃条件焚烧时,水分含量对多环芳烃总体上是促进的,而在850℃焚烧条件下则表现出抑制作用;而水分对氯苯则均表现出抑制作用,并且可以降低氯苯化合物的氯代数.     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

新疆河流洪水水污染分析

洪水期间的水污染主要来源于面源。其特点是污染物的浓度高、负荷量大。给工业、渔业和人民生活都会带来不同程度的危害。悬浮物是洪水过程中的主要面污染产物，同时还作为载体吸附和携带大量的有机物、无机盐、重金属类和微生物进入水体，致使河流水质下降。在研究洪水灾害的同时。不应忽略洪水期间的水污染问题。     

城市生活垃圾理化性质的动态特性分析

对太原市城市生活垃圾的组成、化学元素及重金属等进行了1年(每月2次)共24次的分析。结果表明,太原市生活垃圾的组成在焚烧过程中,能产生低位热值(Q低)的有机物占(44.28±2.24)％,不产生低位热值的无机物占(13.94±2.01)％,混合物(破碎的动植物碎片及粘附在其上面的灰、土、砂)占(43.36±8.67)％。垃圾中可燃物比例较高,水分含量较低,有利于焚烧和热解,低位热值(Q低)平均值为(5590.8±1252.3)kJ/kg,但低位热值随季节变化较大。垃圾中化学元素硫(S)、氯(Cl)、氮(N)、氢(H)、碳(C)、氧(O)的年平均值分别为(0.20±0.13)％、(0.48±0.11)％、(0.87±0.18)％、(2.56±0.76)％、(30.78±4.06)％、(16.42±5.17)％,与其他城市相比,S、N、Cl的含量较高。垃圾中的重金属铅(Pb)、镉(Cd)的年平均值分别为41.94mg/Kg和1.806mg/kg;汞(Hg)含量变化较大。焚烧后的灰渣中,Pb部分挥发,Cd得到富集,但几乎无Hg检出。     

城市生活垃圾管理及资源化

随着社会经济的发展和城市化进程加快，城市生活垃圾的产生量急剧增加。大中城市人均日垃圾产生量约1Kg，井以每年8％．10％的速度增长。至2005年底，生活垃圾清运量1．52亿t，垃圾的集中处理率约为51％。因此城市生活垃圾的处理问题．已成为城市环境保护一个需要迫切解决问题。解决中国城市生活垃圾问题的根本办法。一是建立有效的、环境友好型的城市生活垃圾管理体系，二是实现生活垃圾的资源化。建立有效的环境友好型的生活垃圾管理体系是解决城市生活垃圾问题的基础；生活垃圾的资源化是降低生活垃圾无害化成本，节约资源的根本出路。     

利用干酪根固体~(13)C核磁共振法研究下古生界碳酸盐岩的热演化程度

应用固体~(13)C－NMR技术对下古生界,海相碳酸盐岩干酪根的化学组成和结构特征进行研究，提出应用该技术所测算的干酪根结构参数“芳核平均结构尺寸”能较准确地反映碳酸盐岩的热成熟度。首次提出芳核平均结构尺寸与镜质体反射率之间的关系在干酪根的热演化过程中具有“三段式”特征。利用这一成果对华北地区下古生界成熟度进行了测定，与地质背景甚为吻合。