铝型材挤压模具的失效分析

根据铝型材挤压模具的服役条件,采用宏观与微观相结合的分析方法,分析现场挤压模具的失效形式、失效性质和失效原因,并提出了提高模具使用寿命的一些措施.     

A reflection on four impactful Ambio papers: The biotic perspective: This article belongs to Ambio’s 50th Anniversary Collection. Theme: Climate change impacts

Climate change represents one of the most pressing societal and scientific challenges of our time. While much of the current research on climate change focuses on future prediction, some of the strongest signals of warming can already be seen in Arctic and alpine areas, where temperatures are rising faster than the global average, and in the oceans, where the combination of rising temperatures and acidification due to increased CO₂ concentrations has had catastrophic consequences for sensitive marine organisms inhabiting coral reefs. The scientific papers highlighted as part of this anniversary issue represent some of the most impactful advances in our understanding of the consequences of anthropogenic climate change. Here, we reflect on the legacy of these papers from the biotic perspective.     

Screening Capsicum Accessions for Capsaicinoids Content

Ninety Capsicum accessions selected from the USDA Capsicum germplasm collection were screened for their capsaicinoids content using gas hromatography with nitrogen phosphorus detection (GC/NPD). Fresh fruits of Capsicum chinense, C. frutescens, C. baccatum, C. annuum, and C. pubescens were extracted with methanol and analyzed for capsaicin, dihydrocapsaicin, and nordihydrocapsaicin. Mass spectrometry of the fruit crude extracts indicated that the molecular ions at m/z 305, 307, and 293, which correspond to capsaicin, dihydrocapsaicin, and nordihydrocapsaicin, respectively, have a common benzyl cation fragment at m/z 137 that can be used for monitoring capsaicinoids in pepper fruit extracts. Capsaicin and dihydrocapsaicin were the dominant capsaicinoids detected. Capsaicin concentrations were typically greater than dihydrocapsaicin. Concentrations of total capsaicinoids varied from not detectable to 11.2 mg fruit^?1. Statistical analysis revealed that accession PI-441624 (C. chinense) had the highest capsaicin content (2.9 mg g^?1 fresh fruit) and accession PI-497984 (C. frutescens) had the highest dihydrocapsaicin content (2.3 mg g^?1 fresh fruit). Genebank accessions PI-439522 (C. frutescens) and PI-497984 contained the highest concentrations of total capsaicinoids.     

Screening Capsicum chinense fruits for heavy metals bioaccumulation

Elevated concentrations of heavy metals in edible plants could expose consumers to excessive levels of potentially hazardous chemicals. Sixty-three accessions (genotypes) of Capsicum chinense Jacq, collected from 8 countries of origin were grown in a silty-loam soil under field conditions. At maturity, fruits were collected and analyzed for seven heavy metals (Cd, Cr, Ni, Pb, Zn, Cu, and Mo) concentrations. The main objectives of this investigation were: 1) to determine the concentrations of seven heavy metals in the soil and monitor their accumulation in mature fruits, 2) to categorize the pepper accessions as low or high heavy metal accumulators, and 3) to determine if heavy metal content of the pepper fruit was lower than the permitted limits. Concentrations and relative proportions of heavy metals in pepper fruits of C. chinense varied among accessions. Fruits of Plant Introduction (PI) 355820 accumulated significant concentrations of Cd (0.47 μ g g^?1dry fruit). PI-260522 accumulated the highest concentration of Pb (2.12 μ g g^?1 dry fruit) among the 63 accessions tested. This accession (PI-260522) contained about twice the Pb limit on a fresh weight basis. Among the 63 accessions analyzed, PI-238051 contained the highest levels of Ni (17.2 μ g g^?1). We concluded that high accumulator genotypes may be useful for phytoremediation, while, low accumulator accessions might be appropriate selections for growing on Cd-, Pb-, or Ni-contaminated soils to prevent potential human exposure to heavy metals and health hazards through the food chain.     

Simulation of the flow of an explosive atmosphere exposed to a hot surface

The accidental ignition of combustible atmospheres by hot surfaces is of great concern for chemical and process plant safety. In this paper, we present our research regarding the evolution of thermal plumes originating from hot hemispheres and discs. In particular, we focus on the effect of the orientation of the surface on the ignition process. The auto-ignition temperatures and ignition locations were studied experimentally. To get further insight, we conducted detailed numerical simulations and validated them with measurements. Three-dimensional simulations were performed on hot hemispheres and hot discs for different orientations ranging from 0° to 180°. The solver employs a transient, implicit scheme which is based on the coupled heat transfer and flow equations. The mesh in the vicinity of the hot surfaces is refined to resolve the steep temperature gradients and to capture the boundary layer separation. The influence of the orientation on critical hot spots in the gas mixture is analysed by examining the flow structures and the temperature evolution of the buoyancy-driven flow. Using the obtained results, we discuss the change of the onset and location of the ignition.     

Small scale boilover and visualization of hot zone

Experimental studies of boilover were conducted in small scale rig at Universiti Teknologi PETRONAS (UTP), Malaysia and Loughborough University, United Kingdom. The study at UTP was aimed to demonstrate the ability of conducting tests at a smaller scale to simulate the boilover phenomenon. At Loughborough University, a novel laboratory scale rig was designed and built in order to obtain visual records of fuels' behaviour in a pool fire. The ultimate objective of these studies is to develop a greater understanding of boilover pertaining to fires involving the contents of storage tanks. Fuel mixtures containing light and heavy components were burnt as to study the feasibility of reproducing hot zone formation and boilover in a smaller scale and a safe environment. Boilover occurred after certain period of burning. It is found that thickness of the hot zone changed with time. It is also found that the time needed to start boilover increased when fuel thickness increased. The visualization of the fuel behaviour during the experiments was obtained to better understand the formation and growth of hot zone, the boiling of water layer and hence the boilover occurrence. Based on the data analysis and the photographs recorded from the experiments, the laboratory scale experimental rig could be used to simulate the hot zone formation mechanism and the boilover event safely and successfully. Such information are important for the understanding towards boilover phenomenon.     

电站锅炉水冷壁和过热器爆管分析

采用宏观形貌分析、化学成分分析、金相显微组织分析、材料力学性能测试、SEM微观形貌分析等手段,对某电站锅炉水冷壁管和过热器管破裂进行了分析。结果表明,热（硫）腐蚀导致的过热器管局部穿孔破裂,以及泄漏产生的高温水汽流对水冷壁管的,中刷磨损是爆管的主要原因,过热器管补焊点的再次泄漏是本次事故的直接原因。     

微电解处理低电导印染废水及热效应研究

针对低电导印染废水难处理的特点，采用微电解法对该废水进行了实验研究。在电压一定的条件下，通过改变NaCl电解质的投放量，得到处理该废水的最佳工况。同时，从实验现象中得出温度的变化是影响该废水处理效果的因素之一的结论。从热力学理论研究的角度出发，进一步论证了该结论。     

西北干旱区城市生态环境规划研究——以内蒙古巴彦浩特为例

生态环境规划与建设是干旱区城市实现区域与城市可持续发展的重要保证，本文以位于腾格里沙漠东部边缘的巴彦浩特为例进行干旱区城市生态环境规划研究。在对巴彦浩特生态环境现状分析的基础上，提出了生态环境保护的目标及原则。运用生态学原理，分析了巴彦浩特城市生态环境规划的主要内容及范围，并提出了实施巴彦浩特生态环境规划的措施及要求。     

清洁检修机泵的改造方法

解体维修蜡油重油机泵时的放空浪费及拆卸现场的污染问题一直无法解决。南常减压装置2001年防腐扩能改造时，增设了热柴油冲洗机泵系统。旨在改善作业环境、减少浪费、杜绝污染。通过1年多的实施，取得了良好的使用效果。