高温嗜粪菌的选育和猪粪发酵研究

筛选得到了８株嗜高温（５５℃）嗜粪细菌，均具有较强的发酵猪粪能力。加入所选育菌株进行的猪粪高温（５５℃）固体好氧发酵实验发明，２４ｈ内可将猪粪发酵成无臭味、深褐色的稳定和无害化产物，常温下长时间放置也不会产生腐败和臭味。此发酵产物的氮试验法结果显示，猪粪已发酵至表观成熟和稳定化，可作为进一步制取优质有机复合肥料的良好前体物。     

大直径TA2卷焊坯制备工艺

此文介绍尺寸为φ1547×L900×δ30的大直径TA2卷焊坯的制备工艺。主要包括卷焊坯设计、展开下料的计算、卷圆工艺、焊接工艺等,可供同类材质圆筒件卷圆时参考。     

环境影响综合评价灰色层次模型研究

针对水电工程环境影响综合评价问题，应用拓展的灰关联理论和最小二乘准则，建立了环境影响综合评价的灰色层次模型。以东江水电工程环境影响综合评价为实例说明了该模型的合理性、可信性。结果表明：此基工程使环境总体向理想的１８．１％     

爆炸冲击波作用下靶板的塑性大变形响应研究

对四边约束方形靶板 ,在爆炸冲击波作用下的塑性大变形响应情况 ,进行了理论分析与试验研究。运用能量守恒的方法 ,同时考虑试验过程中靶板的边界约束条件 ,得到了四边约束方形靶板在爆炸冲击波作用下发生塑性大变形时挠度的半经验公式。理论计算与试验结果吻合性较好 ,这种方法可应用于板结构在爆炸冲击波作用下的毁伤或防护方面的工程预测     

黄土与砂土液化特性的对比──土液化与减灾防灾

基于系统的试验 ,总结已有成果 ,研究了饱和黄土和砂土液化在液化机理、液化判别标准、影响液化的因素、孔压和应变的发展等方面的异同之处。研究表明 ,由于在液化机理上存在差异 ,导致二者动荷载下的孔压和应变发展特点有显著差别 ;同一因素对二者液化性状的影响可能相似 ,也可能不同 ;在动三轴液化试验中 ,黄土和砂土均可采用初始液化作为液化的判别标准。     

辽宁省大型底栖无脊椎动物耐污值及水质评价

根据采自辽宁省河流、水库、湖泊及河口湿地水体的209个大型底栖无脊椎动物样本,以及文献记载数据,依据其系统发育、亲缘关系和相同栖息地环境等进行推算,确定了辽宁省大型底栖无脊椎动物耐污值332个。利用上述耐污值并结合BI指数法对辽河、浑河、太子河流域内20个采样点所获得的大型底栖无脊椎动物监测数据进行分析与评价,结果显示各河流上游段水质良好,中下游河段水质较差。     

安徽省TJ-Ⅱ型钻孔体应变同震效应分析

描述了安徽省地震局"十一五"期间安装的5套钻孔体应变仪的地质构造特点与钻孔岩芯物理特性,介绍了TJ-Ⅱ体应变仪的运行情况。通过对两次强震活动的同震效应分析,初步探讨了地理、地质构造条件不同的情况下,各观测井对记录应力活动能力强弱的反映。     

Using Spatial Pattern to Quantify Relationship Between Samples, Surroundings, and Populations

The need for accurate carbon budgeting, climate change modelling, and sustainable resource management has lead to an increase in the number of large area forest monitoring programs. Large area forest monitoring programs often utilize field and remotely sensed data sources. Sampling, via field or photo plots, enables the collection of data with the desired level of categorical detail in a timely and efficient manner. When sampling, the aim is to collect representative detailed data enabling the statistical reporting upon the characteristics of larger areas. As a consequence, approaches for investigating how well sample data represent larger areas (i.e., the sample neighbourhood and the population) are desired. Presented in this communication is a quantitative approach for assessing the nature of sampled areas in relation to surrounding areas and the overall population of interest. Classified Landsat data is converted to forest/non-forest categories to provide a consistent and uniform data set over a 130,000 km² study region in central British Columbia, Canada. From this larger study area 322 2 × 2 km photo plots on a 20 × 20 km systematic grid are populated with composition and configuration information for comparison to non-sampled areas. Results indicate that typically, within the study area, the spatial pattern of forest within a photo plot is representative of the forest patterns found within primary and secondary neighbourhoods and over the entire population of the study. These methods have implications for understanding the nature of data used in monitoring programs worldwide. The ability to audit photo and field plot information promotes an increased understanding of the results developed from sampling and provides tools identifying locations of possible bias.     

Large eddy simulation and experimental study of the effect of wire mesh on flame behaviours of methane/air explosions in a semi-confined pipe

Preventing the propagation of flames in a pipeline is an effective measure for avoiding gas explosion accidents and reducing losses. To evaluate the effect of wire mesh, acting as a porous media, experimental and simulation studies are conducted to determine the influence of the wire mesh on the dynamics of premixed methane/air flame propagation in a semi-closed pipe. Four different kinds of wire mesh with different numbers of layers are chosen in the experiments and simulation, and the mechanism of wire mesh quenching of the flame is investigated. The experimental and simulation results are consistent. Flames are quenched when 4 layers of 40-mesh or 3 layers of 60-mesh wire mesh are used; however, once the flame propagates through the wire mesh, the risk of methane combustion may increase. The wire mesh becomes the key factor causing flame folds and acceleration, and the greater the number of layers or the larger the mesh size is, the more obvious the folds after the flame passes through the wire mesh. Moreover, the combination of heat absorption and disruption of the continuous flame surface by the mesh causes flame quenching. Wire mesh can effectively attenuate the flame temperature during premixed flame propagation in a pipe, and the attenuated maximum rate reaches approximately 79% in the case of adding 3 layers of 60-mesh wire mesh.     

新疆大型工业园总体规划环评指标体系的建立与验证

基于我国工业园指标体系研究现状,归纳、统一了2002—2021年学者提出的8类99个指标,在此基础上总结了规划环评指标体系建立面临的困难。以X工业园为研究案例,结合理论分析,确定其制约因素是水资源数量和环境空气质量,并将制约因素纳入指标集。针对干旱区和大型工业园两个特点,建立了新疆大型工业园总体规划环评指标体系,并对其中4项需要严格要求的特色指标进行了说明。