Cytotoxicity of the soluble and insoluble fractions of atmospheric fine particulate matter

Inhaled atmospheric fine particulate matter(PM_(2.5)) includes soluble and insoluble fractions,and each fraction can interact with cells and cause adverse effects.PM_(2.5) samples were collected in Jinan,China,and the soluble and insoluble fractions were separated.According to physiochemical characterization,the soluble fraction mainly contains watersoluble ions and organic acids,and the insoluble fraction mainly contains kaolinite,calcium carbonate and some organic carbon.The interaction between PM_(2.5) and model cell membranes was examined with a quartz crystal microbalance with dissipation(QCM-D) to quantify PM_(2.5) attachment on membranes and membrane disruption.The cytotoxicity of the total PM_(2.5) and the soluble and insoluble fractions,was investigated.Negatively charged PM_(2.5) can adhere to the positively charged membranes and disrupt them.PM_(2.5)also adheres to negatively charged membranes but does not cause membrane rupture.Therefore,electrostatic repulsion does not prevent PM_(2.5) attachment,but electrostatic attraction induces remarkable membrane rupture.The human lung epithelial cell line A549 was used for cytotoxicity assessment.The detected membrane leakage,cellular swelling and blebbing indicated a cell necrosis process.Moreover,the insoluble PM_(2.5) fraction caused a higher cell mortality and more serious cell membrane damage than the soluble fraction.The levels of reactive oxygen species(ROS) enhanced by the two fractions were not significantly different.The findings provide more information to better understand the mechanism of PM_(2.5) cytotoxicity and the effect of PM_(2.5) solubility on cytotoxicity.     

膜法水处理技术及研究进展

综述了反渗透、微滤、超滤、纳滤、渗透蒸发、液膜等几种常见膜技术的应用现状及进展情况 ,主要对反渗透膜的原理、流程、存在的问题及开发和利用情况进行了介绍。简单概括了近年发展起来的双极膜等新膜分离技术的开发研究。展望了膜分离技术的前景     

膜分离技术处理电镀废水的实验研究

采用纳滤＋反渗透2级处理系统浓缩回收电镀铜漂洗废水。实验结果显示：在△P=1．5MPa条件下进行浓缩．纳滤膜可以使料液浓缩近10倍。纳滤膜对Cu^2＋的截留率在96％以上，对COD的截留率在57％以上。在△P=3．0MPa条件下进行浓缩，反渗透膜可以使料液浓缩近10倍。反渗透膜对Cu^2＋的截留率在98％以上，对COD的截留率在67％以上。随着料液浓度的增加，纳滤膜和反渗透膜的截留率会降低。     

车门框条滚压成形工艺及滚压线设计

以X110型车门为例,分析零件工艺性,介绍滚压成形工艺过程,强调在模具设计和制作中应注意的问题。设计由滚压、校正、滚焊和自动断料等工艺流程组成的滚压线,可作为类似滚压工艺参考。     

膜生物反应器中膜污染研究进展

膜生物反应器是近年新发展起来的高效废水处理工艺。本文综述了国内外对膜污染机理研究的最新成果 ,介绍了相应的解决措施 ,展望了今后的发展前景。     

膜生物反应器技术的研究和应用展望

膜生物反应器是将膜分离技术与生物上结合而开发的新型系统，该文就膜生物反应器的特征、研究现状、不同形式反应器的技术参数与处理效果等。进行了综述、由于膜生物反应器具有明显的优点，故愈来愈受到人们的重视、成为研究的热点之一。膜生物反应器的研究和范围不断拓宽，有的已进入污水处理实用阶段，建议今后在开发适合于分离的特种膜方面，在组件形式，操作条件，清洗方式等对膜通量的影响方面，以及生物作用与膜分离工艺的相互     

Human appropriation of net primary production as determinant of avifauna diversity in Austria

The relationship between land-use induced changes in production ecology and avifauna diversity was analysed using a GIS land cover dataset on a 0.25 km × 0.25 km grid covering Austria's national territory. Considering only aboveground processes, the “human appropriation of net primary production” (HANPP = potential NPP − NPP_t), actual NPP (NPP_act), harvest (NPP_h) and NPP_t (= NPP_act − harvest) were recalculated based on existing datasets. Elevation as well as indicators of land cover heterogeneity and landscape heterogeneity were also considered. Correlation analyses were performed between these potential determinants of avifauna diversity and breeding bird species richness data as well as the percentage of endangered breeding birds included in the Austrian red list. Four spatial scales—0.25 km × 0.25 km, 1 km × 1 km, 4 km × 4 km and 16 × 16 km, were analysed. It was shown that breeding bird species richness was more strongly correlated with production ecological indicators and elevation than with heterogeneity indicators. A residual analysis in which the effect of elevation (a proxy for climate) on species richness and its potential determinants was removed confirmed the importance of the availability of trophic energy (NPP) for bird diversity patterns. The results support the species-energy hypothesis, thus confirming the notion that HANPP could be a useful pressure indicator for biodiversity loss.     

压盖落料冲孔成形模设计

介绍了在尺寸公差及形位公差要求较高的落料冲孔成形件的模具设计过程中，不降低劳动效率的情况下，如何使模具简化、降低模具成本，并使冲压件满足其设计要求。     

环境承载力与环境扶贫

随着人类环境意识的觉醒与升华，引发了对自身生存环境的更深层次的思考。本文就环境承载力的内涵与外延以及它既会造成贫困又可解脱贫困的关键作用进行了研究和探讨。     

滤膜法测定空气中氟化物的改进

测定环境空气中微量氟的方法一般采用滤膜法，但此法工作量大，针对这种情况，本文作两点改进：一是将采集的两张滤膜同时测定；二是将测定过程中的搅拌时间缩短，这样不影响测定结果的准确性，而且降低了工作量。