Toxicological Assessment of Wastewater and Runoff from the Baikal Pulp and Paper Mill

Russian Journal of Ecology -     

清洁生产工艺在造纸工业中的应用

介绍了清洁生产这个新概念,清洁生产工艺在造纸工业中的应用,实例表明:造纸废水再循环,不准能节约水资源,节约能源,防止环境污染,而且可以取得良好的经济效益和社会效益,为造纸废水在2000 年前达到国家排准排放奠定了良好基础     

造纸污泥综合利用热电项目验收监测难点及对策

近年来,随着环境监测技术规范化建设的不断发展,国家环保部相继出台了包括火力发电、水泥制造、汽车制造、造纸工业在内的12个不同行业类型的建设项目竣工验收技术规范。然而,造纸污泥综合利用热电项目验收监测尚未列入规范编制日程,其中工程调查、标准制定、点位布设和报告编制等环节仍存在一定误区和难点。文章例从上述薄弱环节入手,对常见难点问题提出了相应的解决办法,可供广大环境监测工作者参考和借鉴。     

Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

Zn2+胁迫及恢复下番茄幼苗根系中抗氧化系统的动态变化

通过温室水培试验,研究1.0×10-4mol/LZn2 胁迫及解除胁迫对番茄(Lycopersicom esculentum Mill.)幼苗根系中抗氧化系统的动态变化.结果表明,胁迫条件下,番茄根系丙二醛(MDA)和蛋白质含量增加;超氧化物歧化酶(SOD,EC1.15.1.1),过氧化氢酶(CAT,EC1.11.1.6)和谷胱甘肽过氧化物酶(GPX,EC1.11.1.9)活性上升,而过氧化物酶(POD,EC1.11.1.7)活性下降;AsA-GSH循环代谢受影响;抗坏血酸过氧化酶(APX,EC1.11.1.11)活性在胁迫d1、d3上升,随后下降,而谷胱甘肽还原酶(GR,EC1.6.4.2)活性在胁迫1~5d时下降,随后上升;抗坏血酸(AsA)和谷胱甘肽(GSH)含量上升.解除胁迫后,根系中MDA和蛋白质含量随时间延长逐渐减少,接近对照;POD和APX活性增加,而SOD、CAT和GR活性及GSH含量先升高,随后减少;GPX活性和AsA含量却降低;恢复后根系中抗氧化物水平仍然高于对照.依据实验结果,文中讨论了胁迫及恢复过程中植物AsA-GSH循环代谢的作用.图3参16     

An assessment on the recycling opportunities of wastes emanating from scrap metal processing in Mauritius

This paper presents an assessment on the wastes namely slag, dust, mill scale and sludge resulting from scrap metal processing. The aim of this study is to demonstrate that there are various ways via which scrap metal processing wastes can be reused or recycled in other applications instead of simply diverting them to the landfill. These wastes are briefly described and an overview on the different areas of applications is presented. Based on the results obtained, the waste generation factor developed was 349.3 kg per ton of steel produced and it was reported that slag represents 72% of the total wastes emanating from the iron and steel industry in Mauritius. Finally the suitability of the different treatment and valorisation options in the context of Mauritius is examined.     

造纸污泥综合利用热电项目验收监测难点及对策

近年来,随着环境监测技术规范化建设的不断发展,国家环保部相继出台了包括火力发电、水泥制造、汽车制造、造纸工业在内的12个不同行业类型的建设项目竣工验收技术规范。然而,造纸污泥综合利用热电项目验收监测尚未列入规范编制日程,其中工程调查、标准制定、点位布设和报告编制等环节仍存在一定误区和难点。文章例从上述薄弱环节入手,对常见难点问题提出了相应的解决办法．可供广大环境监测工作者参考和借鉴。     

昆嵛山盐肤木RhuschinensisMill．群落特征及其物种多样性

根据野外典型样方调查结果,以群落植物种类组成、群落外貌特征、群落垂直结构特征、群落多样性几项指标,分析山东半岛昆嵛山国家级自然保护区盐肤木Rhuschinensis群落特征。结果表明：盐肤木群落共出现种子植物66种,隶属于32科57属。在盐肤木群落属的区系组成中,群落植物主要由温带区系和热带区系成分组成,其中温带植物属占显著优势,其次为热带分布属,说明该群落具有明显的温带性质,并具有过渡特征。群落层次分明,有乔木层、灌木层、草本层3个层次,各层次的优势种依次为盐肤木和赤松Pinusdensiflora、麻栎Quercusacutissima、披针叶苔草Carexlanceolata。盐肤木群落的物种多样性由高到低依次为灌木层、乔木层、草本层,低均匀度导致物种丰富度最高的草本层具有最低的物种多样性。调查显示盐肤木幼苗幼树多,自我更新良好,群落处于稳定增长状态。通过对群落特征和物种多样性的研究,揭示了昆嵛山盐肤木群落的自然生态规律,为保护和开发利用盐肤木提供了科学依据。     

选矿废水过滤性能的实验研究

通过实验得出 ,不经加药处理的选矿废水 ,污泥比阻 r=33.1× 1 0 1 1 cm/g太大 ,较难过滤 ;加药处理后 ,污泥比阻r=0 .0 6× 1 0 1 1 cm/g变小 ,可以采用较先进的机械脱水处理。     

Discriminating between Copper and Silver Mill Tailings in Silver Bow Creek Overbank Deposits,Butte, Montana,U.S.A.

Mining of the Butte deposit evolved over 100 years from placer mining starting in 1864 through silver mining to copper mining in the 1900s. Tailings resulting from milling during the period 1876-1924 were typically sluiced into the adjacent Silver Bow Creek (SBC) where they were washed downstream. The most significant flood event in 1908, among others, resulted in emplacement of approximately 2.9 m tons of sediment intermixed with tailings as overbank deposits along SBC between Butte and the Warm Springs Ponds. Apportioning the associated costs was contingent in part on discriminating between ownership of liability for the silver and copper tailings, which together formed the most significant portion of the overbank deposits. Samples were collected of tailings end-members and SBC deposits and their characteristic mineralogy (e.g. galena for silver tailings, and enargite for copper tailings) used to ascertain mixing of the tailings along SBC. This analysis identified Pb as a signature element for silver tailings and Cu for copper tailings. Two-hundred and twenty-four Cu and Pb chemical analyses representing 43 transects through the overbank deposits along SBC allowed calculation of the proportional contribution of the end members for each integrated transect. Accumulating the volumes from each transect resulted in an apportionment of 53% copper and 47% silver tailings in the overbank deposits.