Relationship between PM10 and PM2.5 levels in high-traffic area determined using path analysis and linear regression

The objective of this study was to determine the relationship between PM_(10) and PM_(2.5) levels as related to meteorological conditions and traffic flow using both a linear regression analysis and a path analysis. The Particulate matter(PM) samples were collected from Sukhumvit road, Bangkok, Thailand, at both open(104 samples) and covered(92 samples)areas along the road. Fifteen percent of all samples were separated before the statistical models were run and used for model validation. The results from the path analysis were more elaborate than those from the linear regression, thus indicating that meteorological conditions had a direct effect on the particulate levels and that the effects of traffic flow were more variable in open areas. The model also indicated that meteorological conditions had an indirect effect and that traffic flow had a direct effect on particulate levels in covered areas. The model validation results indicated that for open areas, the R~2 values were not very different between the path analysis and the linear regression model, but that the path analysis was more accurate than the linear regression model at very low PM concentrations. At high PM concentrations, the path analysis model also had a better fit than did the linear regression, so the predictions from the path analysis model were more accurate than those from the linear regression.     

旋压变形数值模拟中局部加载卸载问题的处理

此文介绍了旋压加工数值模拟中遇到的局部加载卸载问题的处理方法,并对筒形件强力旋压过程进行了数值模拟,求得了变形区应力应变的分布,理论计算结果与变形实际和实测结果完全吻合.     

Comparison of mesophilic and thermophilic anaerobic digestions of thermal hydrolysis pretreated swine manure: Process performance, microbial communities and energy balance

Anaerobic digestion (AD) of swine manure (SM) commonly shows low biogas output and unsatisfactory economic performance. In this study, thermophilic AD (TAD, 50 ± 1 °C) was combined with thermal hydrolysis pretreatment (THP, 170 °C/10 bar), to investigate its potential for maximizing biogas yield, securing successful digestion and microbial diversity, as well as improving energy balance. Four lab-scale continuously stirred tank reactors were operated for 300 days and compared with each other, i.e., reactor 1 (raw SM fed in mesophilic AD: RSM-MAD), reactor 2 (THP-treated SM fed in MAD: TSM-MAD), reactor 3 (RSM-TAD), and reactor 4 (TSM-TAD). The results showed that THP was efficient to increase methane production of SM, TSM-TAD mode led to the highest methane yield (129.8 ± 40.5 mL-CH₄/g-VS/day) among the tests (p < 0.05). Although TAD was more likely to induce free ammonia (> 700 mg/L) or volatile fatty acids (> 6000 mg/L) accumulation compared with MAD in start-up phase, TSM-TAD treatment mode behaved a sustainable digestion process in a long-term operation. For TSM-TAD scenario, higher Shannon–Weaver (3.873) and lower Simpson index (0.061) indicated this mode ensured and enlarged the diversity of bacteria communities. Phylum Bathyarchaeota was dominant (59.3%−90.0%) in archaea community, followed by Euryarchaeota in the four reactors. RSM-MAD treatment mode achieved the highest energy output (4.65 GJ/day), TSM-TAD was less effective (−17.38 GJ/day) due to increased energy demands. Thus improving the energetic efficiency of THP units is recommended for the development of TSM-TAD treatment mode.     

太湖梅梁湾水体中可见光的衰减、吸收及散射

对太湖梅梁湾沿岸带和敞水区的水体进行了光学特性研究。结果发现，沿岸带的水下光辐射衰减系数(Kd)值较敞水区小；400nm与500nm向上辐照度比值(Eu440／Eu550),沿岸带在1m左右最小,敞水区在0．5m左右最小;沿岸带的水面下向上辐照度与向下辐照度的比值(R)低于敞水区：440、550、670nm的后向散射与吸收的比值(b／a),在沿岸带的1m处最大,敞水区在0．5m处最大。这些结果说明,相对于敞水区而言,沿岸带的光衰减较弱,无机悬浮颗粒的含量较少,最大叶绿素a分布较深。     

管材的冲切加工

此文系统介绍了管材冲切加工的工艺及模具设计,对常用圆断面管材的各种冲切工艺,如端口平面冲切、型面冲切等进行了探讨;分析了管材冲切加工中存在的主要问题;就如何提高冲切质量提出了行之有效的解决办法。     

后张梁管道摩阻损失测试技术与数据处理

针对常规测试中存在的问题 ,改进了管道摩阻损失的测试方法 ,消除了喇叭口等因素影响 ,使得管道摩阻测试更加合理和准确。介绍了后张法预应力管道摩阻损失的计算 ,结合秦沈客运专线双线整孔简支箱梁的管道摩阻损失测试 ,利用最小二乘原理对测试数据进行处理 ,得到了摩阻系数 μ和k的计算公式 ,所得参数为施工提供了依据。最后讨论了摩阻系数对张拉控制应力的影响 ,提出现场测试的一般性原则和要求。     

微波消解/ICP-AES法分析冶炼厂固废中重金属

分析固体废物中金属元素全量分析的微波消解条件,通过实验确定样品的粉碎粒度、消解功率、消解温度、消解时间等因素对样品消解效果的影响,以等离子发射光谱测定冶炼厂固体废物中24种痕量金属元素,通过测定的检出限、精密度、准确度,确立冶炼厂固体废物痕量金属全量分析检测方法准确高效。     

Impact of anthropogenic emissions and open biomass burning on regional carbonaceous aerosols in South China

Carbonaceous aerosols were studied at three background sites in south and southwest China. Hok Tsui in Hong Kong had the highest concentrations of carbonaceous aerosols (OC = 8.7 ± 4.5 μg/m³, EC = 2.5 ± 1.9 μg/m³) among the three sites, and Jianfeng Mountains in Hainan Island (OC = 5.8 ± 2.6 μg/m³, EC = 0.8 ± 0.4 μg/m³) and Tengchong mountain over the east edge of the Tibetan Plateau (OC = 4.8 ± 4.0 μg/m³, EC = 0.5 ± 0.4 μg/m³) showed similar concentration levels. Distinct seasonal patterns with higher concentrations during the winter, and lower concentrations during the summertime were observed, which may be caused by the changes of the regional emissions, and monsoon effects. The industrial and vehicular emissions in East, Southeast and South China, and the regional open biomass burning in the Indo-Myanmar region of Asia were probably the two major potential sources for carbonaceous matters in this region.     

Field controlled experiments of mercury accumulation in crops from air and soil

Field open top chambers (OTCs) and soil mercury (Hg) enriched experiments were employed to study the influence of Hg concentrations in air and soil on the Hg accumulation in the organs of maize (Zea mays L.) and wheat (Triticum aestivum L.). Results showed that Hg concentrations in foliages were correlated significantly (p < 0.05) with air Hg concentrations but insignificantly correlated with soil Hg concentrations, indicating that Hg in crop foliages was mainly from air. Hg concentrations in roots were generally correlated with soil Hg concentrations (p < 0.05) but insignificantly correlated with air Hg concentrations, indicating that Hg in crop roots was mainly from soil. No significant correlations were found between Hg concentrations in stems and those in air and soil. However, Hg concentrations in upper stems were usually higher than those in bottom stems, implying air Hg might have stronger influence than soil Hg on stem Hg accumulation.     

Limits of ecodesign: the case for open source product development

Abstract

In pursuit of coping mechanisms for the challenges of sustainable manufacturing, systematic methods have been developed to allow engineers to improve the ratio between products’ utility and environmental impact. These necessary efforts remain however limited if the surrounding production and consumption practices are not called into question at the same time. This article introduces open source product development as a potential approach for unlocking the limits of existing sustainable product design practices and to lead towards alternative and eco-efficient production and consumption practices termed as participative production. First, it discusses the potential advantages of this emerging practice in terms of environmental sustainability. Second, it provides a screened qualitative environmental analysis of 18 exemplary open source hardware products. Specific sustainable design principles implemented by these products are highlighted and discussed in order to identify challenges for further common research in the field of open source and sustainable product development.