Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO_2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO_2 catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N_2 physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed desorption of CO_2(CO_2-TPD),temperature programmed desorption of NH_3(NH_3-TPD),and temperature programmed H2 reduction(H_2-TPR).The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases,higher surface area,and lower reduction temperature are all favorable for catalytic activity.The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS).Methanol appears to be formed via the bidentate-formate(b-HCOO) species undergoing stepwise hydrogenation,while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.     

低温等离子体协同催化降解废气污染物的研究进展

阐述了低温等离子体协同催化工艺流程与反应机理,探讨了反应温度、废气进口组分、废气中水蒸气含量、气体流速、气溶胶等因素对降解效果的影响。分析认为:一段式低温等离子体协同催化可改变低温等离子体特征及催化剂催化特性,但尚未解决尾气臭氧逃逸、副产物产生及放电稳定性等问题;两段式低温等离子体协同催化可提高污染物分子降解效率并减少尾气臭氧逃逸,但未能有效利用等离子体的能量,气体中的水蒸气、粉尘及反应过程中产生的气溶胶均能影响后置催化剂的催化性能;两段式低温等离子体协同催化已具备工程应用条件,还需配套高效预处理单元以降低废气中水蒸气、粉尘等对催化剂的影响。     

Synergistic effect of F and triggered oxygen vacancies over F-TiO2 on enhancing NO ozonation

Oxidation-absorption technology is a key step for NO_x removal from low-temperature gas. Under the condition of low O₃ concentration (O₃/NO molar ratio = 0.6), F-TiO₂ (F-TiO₂), which is cheap and environmentally friendly, has been prepared as ozonation catalysts for NO oxidation. Catalytic activity tests performed at 120°C showed that the NO oxidation efficiency of F-TiO₂ samples was higher than that of TiO₂ (about 43.7%), and the NO oxidation efficiency of F-TiO₂-0.15 was the highest, which was 65.3%. Combined with physicochemical characteristics of catalysts and the analysis of active species, it was found that there was a synergistic effect between F sites and oxygen vacancies on F-TiO₂, which could accelerate the transformation of monomolecular O₃ into multi-molecule singlet oxygen (¹O₂), thus promoting the selective oxidation of NO to NO₂. The oxidation reaction of NO on F-TiO₂-0.15 follows the Eley-Rideal mechanism, that is, gaseous NO reacts with adsorbed O₃ and finally form NO₂.     

有机物分子结构与光催化氧化反应活性的关系

从正辛醇－水分配系数与Ｈａｍｍｅｔｔ常数，光催化氧化过程中的光解作用，表面活性剂的微环境效应及取代基的诱导效应等方面，探讨了有机物分子结构与其光催化氧化反应性之间的关系。     

Utilization of Bagasse Energy in Thailand

Bagasse, a biomass fuel, is the waste generated by the sugar-making process from sugar cane. Sugar making is one of the most important agricultural-produce processing industries for developing countries in Southeast Asia, Latin America and Africa. As sugar producing plants need electric power and process steam, co-generation using bagasse as an alternate fuel for petroleum has been in use for some time. Thailand recently became one of the largest sugar exporters by enlarging plant capacities and improving equipment, thus reducing its production cost. In addition, the Thai government promotes power generation using bagasse as a means to combat global warming by raising the purchase price of the surplus power. The industry is in the process of further raising the plant capacity, and improving the power-generating efficiency. This will enable a plant to generate more electric power than its in-plant need so that the surplus power can be sold to the commercial grid. It also plans to become a local power supplier during off-season of sugar making by adding a condensing turbine generator. A typical Thai sugar plant of the latest design generates steam of 4Mpa at the bagasse boiler outlet with the temperature of 400°C at 84% boiler efficiency. With the bagasse LHV of 7,540 kJ/kg and that of fuel oil 41, 840 kJ/kg, and taking 90%as oil-burning boiler efficiency, 5.95 kg of bagasse would replace 1 kg of oil. The Kyoto Mechanism defines CO₂ generation by fuel oil as 2.65 kg per liter. Using 0.85for the specific gravity of fuel oil, the amount of CO₂ generation will be 3.12 kg-CO₂/kg. Therefore, CO₂reduction per ton of bagasse in terms of fuel oil will be: 3.12/5.95 =0.524 kg-CO₂/kg-bagasse. As 1 kg of bagasse generates 2 kg of steam, the CO₂reduction of a 100t/h steam boiler will be112,660 ton/year for an annual operation of4,300 hours, as follows. 0.524 × 100/2 = 26.2 t-CO₂/h, 26.2 × 4,300 =112,660 t-CO₂/year. This revised version was published online in August 2006 with corrections to the Cover Date.     

粉煤灰综合利用—制无烟型煤

粉煤灰,又称“烟道灰”,是从燃烧装置的烟道气中收集而得到的细灰.目前,国内外对粉煤灰的综合利用极为重视,但大部分都着眼于建材、建筑和农业等方面,而本发明是将粉煤灰作为型煤的掺合料配制型煤,即将粉煤灰与烟煤、褐煤和泥炭混配,再加入适量的添加剂,混匀后经压力成型制成各种形状的无烟燃料.实践证明,只要灰质、煤质和掺比相匹配,可压制成合格的掺灰型煤,达到“煤掺灰,灰代煤、效益高”的效果.该掺灰型煤,具有反应活性高,燃烧效果好,基本无烟等特点,投资少,见效快,效益高,节约能源等.经试烧证明,燃烧排烟中的各种污染物可消减50%以上,节约煤炭约30%以上,并且,每吨掺灰型煤(按售价每吨100元计算)可增收15—20元.     

Decomplexation of Cu-1-hydroxyethylidene-1,1-diphosphonic acid by a three-dimensional electrolysis system with activated biochar as particle electrodes

The feasibility of decomplexation removal of typical contaminants in electroplating wastewater, complexed Cu(II) with 1-hydroxyethylidene-1,1-diphosphonic acid (Cu-HEDP), was first performed by a three-dimensional electric reactor with activated biochar as particle electrodes. For the case of 50 mg/L Cu-HEDP, Cu(II) removal (90.7%) and PO initial pH 7, acid-treated almond shell biochar (AASB) addition 20 g/L, and reaction time 180 min, with second-order rate constants of 1.10 × 10⁻³ and 1.94 × 10⁻⁵ min⁻¹respectively. The growing chelating effect between Cu(II) and HEDP and the comprehensive actions of adsorptive accumulation, direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP, even though the mineralization of HEDP was mainly dependent on anode oxidation. The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction, especially acidic carboxylic groups and quinones on particle electrodes, which decreased from 446.74 to 291.48 µmol/g, and 377.55 to 247.71 µmol/g, respectively. Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H₂O₂ and reactive oxygen species (e.g., •OH), a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.     

气候变化与实施清洁发展机制的展望

本文第一部分介绍了《气候变化框架公约》的达成与主要内容，以及在柏林、日内瓦、京都与布宜诺斯艾利斯先后召开的４ 次缔约方会议的结果； 第二部分介绍了清洁发展机制（ＣＤＭ） 同《京都议定书》的其他灵活机制的异同，以及ＣＤＭ 的特点、方法学与技术问题； 第三部分分析了ＣＤＭ 的前景、影响其成功实施的因素、它可能提供的潜在机遇以及实施中的需求与供给；最后就ＣＤＭ 的实施作了展望。     

e-Serem – A Web-Based Manual For The Estimation of Emission Reductions From JI and CDM Projects

This paper presentse-SEREM (Smart Emission ReductionEstimation Manual), a cost-free, easilyaccessed and updated, web-based manual forestimating emission reductions from Joint Implementation (JI) andClean Development Mechanism (CDM) projects. e-SEREM's main functions arethe selection of a benchmark for a specificproject type in the power or heat sectorand the calculation of the annual andcumulative emission reductions accrued bythis project for its crediting lifetime.e-SEREM was developed in order to test itsapplicability and practicality in assistingproject developers and evaluators toelaborate baselines easily and calculatethe emission credits earned by candidate JIor CDM projects hosted in several countries.