Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.     

Methods for project-based mechanisms (JI/CDM)—relevance of IPCC inventory guidelines

A baseline for a project consists of estimates of annual emissions of greenhouse gases (GHG) for a given time period without implementing the project. A general three-step process for determining the baseline is suggested. The emission reduction of the project is given by the difference between the baseline and the monitored annual emissions. A preferred method, direct measurement of the emission reduction, is possible for some types of projects. Methods for estimating the annual baseline emissions are not necessary for the latter category, and a definition of this project category is suggested. IPCC Guidelines for National GHG Inventories categorise the emission sources so that only direct emissions from consumption of fuel and feedstock are calculated. There are thus no emission factors for indirect emissions (e.g. electricity consumption or km transported) or emission factors that depend on technology only, independent of consumption of fuel and feedstock. Technology-dependent emission factors may thus need to be developed for estimating indirect emissions and multi-project baselines. Consistency should be sought with the IPCC Guidelines when estimating annual baseline emissions and in monitoring project emissions to ensure comparability with the National Inventories.     

Human exposure to a mixture of endocrine disruptors and serum levels of thyroid hormones: A cross-sectional study

Exposure to endocrine disruptors (EDCs) could disrupt thyroid hormone homeostasis. However, human epidemiological studies reported inconsistent observations, and scarce information on the effect of a mixture of chemicals. The aim of the present study was to examine the associations of multiple chemicals with thyroid hormones among adults from China. We measured serum levels of thyroid hormones and urinary levels of 11 EDCs, including six phthalate metabolites, bisphenol A (BPA), bisphenol F (BPF), bisphenol S (BPS), perchlorate, and thiocyanate among 177 healthy adults without occupational exposure. Associations of multiple urinary analytes with serum thyroid hormones were examined by performing general linear regression analysis and bayesian kernal machine regression analysis. These EDCs were detected in almost all samples. After adjusting for various covariates, we observed only BPF significantly associated with total thyroxin (TT4) (β=-0.27, 95% confidence interval (CI) [-0.41, -0.14]), total triiodothyronine (TT3) (β=-0.02 95% CI [-0.03, -0.01]), free T4 (fT4) (β=-0.02, 95% CI [-0.03, -0.01]), and free T3 (fT3) (β=-0.04, 95% CI [-0.07, -0.01]), and mono-(2-ethyl-5-oxohexyl) phthalate (MEOHP) and monoethyl phthalate (MEP) positively associated with TT4 (β=0.24, 95% CI [0.01, 0.48]) and fT4 (β=0.02, 95% CI [0.01, 0.04]), respectively. Moreover, we observed significant dose-response relationships between TT4 and the mixture of 11 EDCs, and BPF was the main contributor to the mixture effect, suggesting the priority of potential effect of BPF on disrupting thyroid function under a real scenario of human exposure to multiple EDCs. Our findings supported the hypothesis that human exposure to low levels of EDCs could alter thyroid hormones homeostasis among non-occupational healthy adults.     

e-Serem – A Web-Based Manual For The Estimation of Emission Reductions From JI and CDM Projects

This paper presentse-SEREM (Smart Emission ReductionEstimation Manual), a cost-free, easilyaccessed and updated, web-based manual forestimating emission reductions from Joint Implementation (JI) andClean Development Mechanism (CDM) projects. e-SEREM's main functions arethe selection of a benchmark for a specificproject type in the power or heat sectorand the calculation of the annual andcumulative emission reductions accrued bythis project for its crediting lifetime.e-SEREM was developed in order to test itsapplicability and practicality in assistingproject developers and evaluators toelaborate baselines easily and calculatethe emission credits earned by candidate JIor CDM projects hosted in several countries.     

摆辗机摆头运动学分析和运动轨迹的数值模拟

从摆动辗压机中摆头的结构出发．通过运动学分析给出摆头运动方程，采用数值方法对摆头运动轨迹进行数值模拟，为摆辗机结构设计和摆辗工艺的合理应用提供科学依据。     

聚苯硫醚(PPS)掺炭纤维协同飞灰脱除气态汞的实验研究

利用汞蒸气发生器产生的单质汞和烟气中的一些主要气体成分模拟烟气条件,在固定床实验系统上分别进行了燃煤飞灰、聚苯硫醚(PPS)掺炭纤维及燃煤飞灰和PPS掺炭纤维联合对燃煤烟气中Hg0的脱除实验研究.结果表明:燃煤飞灰和PPS掺炭纤维对Hg0的吸附是物理吸附和化学吸附的共同结果,它们各自的脱汞效率分别可达27%和65%左右...     

藻毒素复合污染对鱼体的免疫毒性研究

针对水体富营养化问题,通过单一暴露和联合暴露方式研究两种MCs四种暴露剂量（0．1,1,10,100μg／L）下对鱼体的免疫毒效应。结果发现,不同剂量MCLR和MCRR单一暴露都能使鲫鱼淋巴细胞发生死亡,呈现明显的剂量效应和时间效应关系。且MCLR对鱼体的毒性相对McRR要更显著;MCLR和McRR复合暴露对鱼体淋巴细胞的毒性效应表现为协同作用,且随着毒素浓度的增加,其毒性效应差异显著性也随之升高,故而鱼体的免疫系统造成重大的影响,因此应当加强控制藻毒素在水体中的复合污染。     

危险废物回转窑焚烧系统的控制参数分析及调节方法研究

随着我国经济的迅速发展,危险废物产量持续增长,它们带来了严重的社会危害和环境危害。焚烧法是一种高温热处理技术,危险废物通过焚烧处理可实现无害化、减量化和资源化。回转窑焚烧系统具有处置范围广、处理量大、焚毁率高、安全可靠和可长期持续运行等特点,被国内外广泛应用。文章通过分析回转窑焚烧系统的主要控制参数,根据工程运行的实际经验,绘制了回转窑焚烧系统控制参数和焚毁率关系图,并提出了“最佳焚烧区域”的概念,对于回转窑焚烧系统的调试和运行工作,有积极的指导作用和重要的现实意义。     

Long-range atmospheric transport of three toxaphene congeners across Europe. Modeling by chained single-box FATEMOD program

Background, aims, and scope  Since toxaphene (polychlorocamphene, polychloropinene, or strobane) mixtures were applied for massive insecticide use in the 1960s to replace the use of DDT, some of their congeners have been found at high latitudes far away from the usage areas. Especially polychlorinated bornanes have demonstrated dominating congeners transported by air up to the Arctic areas. Environmental fate modeling has been applied to monitor this phenomenon using parallel zones of atmosphere around the globe as interconnected environments. These zones, shown in many meteorological maps, however, may not be the best way to configure atmospheric transport in air trajectories. The latter could also be covered by connecting a chain of simple model boxes. We aim to study this alternative approach by modeling the trajectory chain using catchment boxes of our FATEMOD model. Polychlorobornanes analyzed in biota of the Barents Sea offered one case to study this modeling alternative, while toxaphene has been and partly still is used massively at southern East Europe and around rivers flowing to the Aral Sea. Materials and methods  Pure model substances of three polychlorobornanes (toxaphene congeners P26, P50, and P62) were synthesized, their environmentally important thermal properties measured by differential scanning calorimetry, as evaluated from literature data, and their temperature dependences estimated by the QSPR programs VPLEST, WATSOLU, and TDLKOW. The evaluated property parameters were used to model their atmospheric long-range transport from toxaphene heavy usage areas in Ukraine and Aral/SyrDarja/AmuDarja region areas, through East Europe and Northern Norway (Finnmarken) to the Barents Sea. The time period used for the emission model was June 1997. Usual weather conditions in June were applied in the model, which was constructed by chaining FATEMOD model boxes of the catchment’s areas along assumed maximal air flow trajectories. Analysis of the three chlorobornanes in toxaphene mixtures function as a basis for the estimates of emission levels caused by its usage. High estimate (A) was taken from contents in a Western product chlorocamphene and low estimate (B) from mean contents in Russian polychloroterpene products to achieve modeled water concentrations. Bioaccumulation to analyzed lipid of aquatic biota at the target region was estimated by using statistical calculation for persistent organic pollutants in literature. Results  The results from model runs A and B (high and low emission estimate) for levels in sea biota were compared to analysis results of samples taken in August 1997 at Barents Sea. The model results (ng g⁻¹ lw): 4–95 in lipid of planktovores and 7–150 in lipid of piscivores, were in fair agreement with the analysis results from August 1997: 21–31 in Themisto libellula (chatka), 26–42 in Boreocadus saida (Polar cod), and 5–27 in Gadus morhua (cod) liver. Discussion  The modeling results indicate that the application of chained simple multimedia catchment boxes on predicted trajectory is a useful method for estimation of volatile airborne persistent chemical exposures to biota in remote areas. For hazard assessment of these pollutants, their properties, especially temperature dependences, must be estimated by a reasonable accuracy. That can be achieved by using measurements in laboratory with pure model compounds and estimation of properties by thermodynamic QSPR methods. The property parameters can be validated by comparing their values at an environmental temperature range with measured or QSPR-estimated values derived by independent methods. The chained box method used for long-range air transport modeling can be more suitable than global parallel zones modeling used earlier, provided that the main airflow trajectories and properties of transported pollutants are predictable enough. Conclusions  Long-range air transport modeling of persistent, especially photo-resistant organic compounds using a chain of joint simple boxes of catchment’s environments is a feasible method to predict concentrations of pollutants at the target area. This is justified from model results compared with analytical measurements in Barents Sea biota in August 1997: three of six modeled values were high and the other three low compared to the analysis results. The order of magnitude level was similar in both modeled (planktovore and piscivore) and observed (chatka and polar cod) values of lipid samples. The obtained results were too limited to firm validation but are sufficient to justify feasibility of the method, which prompts one to perform more studies on this modeling system. Recommendations and perspectives  For assessment of the risk of environmental damages, chemical fate determination is an essential tool for chemical control, e.g., for EU following the REACH rules. The present conclusion of applicability of the chained single-box multimedia modeling can be validated by further studies using analyses of emissions and target biota in various other cases. To achieve useful results, fate models built with databases having automatic steps for most calculations and outputs accessible to all chemical control professionals are essential. Our FATEMOD program catchments at environments and compound properties listed in the database represent a feasible tool for local, regional, and, according our present test results, for global exposure predictions. As an extended use of model, emission estimates can be achieved by reversed modeling from analysis results of samples corresponding to the target area. This article is dedicated to the memory of Professor Alexander B Terentiev (who passed away in November 2006), our true friend. With his Institute of Organo-Element Compounds, Russian Academy of Science, Moscow, he was an important main organizer of the six joint Finnish–Russian seminars (every third year since 1989) on the field (‘Chemistry and Ecology of Organo-Element Compounds’). He prompted us especially to search properties and environmental fates for various polyhalogen compounds. We remember him for his friendly character and great sense of humor.     

Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.