Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

驾驶舱空气动力源致振动响应分析研究

目的分析驾驶舱外形上多处凸起对驾驶舱内若干重要部位的振动响应的影响。方法首先采用大涡模拟方法,计算多种飞行工况下分离气流产生的作用于机身前段外表面的非定常脉动压力载荷,然后将所得载荷作用于前机身详细有限元模型上,获得所关心的驾驶舱内部分站位的加速度响应。结果通过对加速度响应结果的分析处理及与试飞测试数据对比,可知驾驶舱外形上多处凸起对驾驶舱内的振动量值影响比较大,气流分离对驾驶舱舱内振动贡献,峰值位置处达到了25%左右。结论相关计算结果可用于驾驶舱工效性评估和驾驶舱外形优化。     

磁性氧化石墨处理乳化含油废水及磁致增强效应

以高铁酸钾为氧化剂,基于改进Hummers法制备了新型磁性氧化石墨材料,在SEM、FTIR、氮气吸脱附和表面接触角表征基础上,探究了该材料处理乳化含油废水的效果及磁致增强效应.结果表明：相较于石墨,磁性氧化石墨比表面积增大,表面有卷曲结构并负载着Fe₃O₄颗粒,具有含氧官能团,存在疏水性较强的微观孔隙结构.在外加磁场条件下,磁性氧化石墨团聚,形成疏水性宏观孔隙结构,利于乳化油滴的吸附和附着.磁性氧化石墨处理乳化含油废水的能力远好于石墨与粉末活性炭,且处理效率与磁场强度成正相关,COD去除率可达95%以上.使用后的磁性氧化石墨进行溶剂萃取或热处理,可以循环使用.磁性氧化石墨经过4次循环使用,热再生效率为92%,溶剂萃取再生效率为86%.以上研究为乳化含油废水的处理提供了一种有效的方法.     

氮掺杂二氧化钛负载钒磷氧催化氧化NO的实验研究

以VPO为活性组分,N掺杂TiO 2为载体,采用浸渍法制备了VPO/TiN催化剂,基于单因素实验研究了其对NO的选择性催化氧化(SCO)性能以及抗硫抗水性能。研究表明:当P/V为1/5、N/Ti为1、活性组分负载量为10%、焙烧温度为350℃时,催化剂的SCO活性最好,NO氧化率达到61%;光致发光光谱(PL)表征显示N掺杂TiO 2在催化剂表面形成的氧空位可增强催化剂对O 2的吸附;VPO/TiN催化剂抗硫抗水性能较强,反应后的催化剂表面未发现硫酸根的特征峰,水蒸气主要通过与NO竞争吸附占据活性位点来抑制催化剂的SCO活性。     

强酸型离子交换纤维富集-火焰原子吸收测定水中痕量铜、铅、镉、镍

通过强酸型离子交换纤维柱,在同一水样中同时富集和洗脱了铜、铅、镉、镍,采用火焰原子吸收光谱法测定,并对富集条件及洗脱条件、干扰因素进行了探讨。该方法简便易行,回收率在96.1%~105.5%之间,测定的相对标准偏差小于5.0%。     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.     

1000t/d含油废水旋流分离技术及设备研究

将实验室研制的 HL 型旋流器用压力容器式方式并联起来 ,建立 10 0 0 t/ d规模的示范装置 ,并进行试验。示范装置的试验结果表明 ,与工业测试比较 ,HL型旋流器并没有因为规模的放大而造成性能下降 ,它能取代石化行业目前采用的“一隔二浮”流程中的大部分装置 ,具有明显的经济效益和广阔的应用前景     

Fetal exsanguination following intrauterine angiographic assessment and selective termination of a hydrocephalic,monozygotic co-twin

Selective termination by intracardiac potassium chloride injection was performed in twins discordant for hydrocephaly at 20 weeks' gestation. Because of the potential for vascular anastomoses to exist between the twins, fetal angiography was performed prior to the selective termination procedure. Determination of vascular connections between the fetuses was hindered by fetal bradycardia following intracardiac administration of contrast material. Selective termination was performed without difficulty using intracardiac potassium chloride (KCl) to produce asystole in the twin with hydrocephaly. The unaffected fetus appeared active and had a normal heart rate during and immediately after the procedure. However, both twins were found to have died the following day. Pathologic examination documented several vascular anastomoses between the monochorionic, diamniotic fetuses. A likely cause of death was exsanguination of the normal twin into the abnormal one. This case illustrates the difficulties encountered in selective termination of monozygotic twins and, to our knowledge, represents the first reported use of intrauterine fetal angiography.     

A survey of diagnostic amniocenteses in Oxford from 1974–1981

A survey was conducted of the results of mid-trimester diagnostic amniocenteses in the Oxford Region from 1974 to 1981. The survey used data relating to all 4357 singleton pregnancies in which an amniocentesis was performed during this period. Follow-up information on outcome was obtained in respect of 4284 (98 per cent) pregnancies. A cell culture to determine karyotype and an alpha-fetoprotein determination was carried out in all cases. From 1974 to 1981 amniocenteses became increasingly common, rising from 2 to 32 per 1000 births. The most common indication for amniocentesis was a high risk of a chromosome abnormality–56 per cent of all amniocenteses. Within this group advanced maternal age was responsible for 89 per cent of the cases. The next most common indication was a high risk of a neural tube defect (37 per cent of all amniocenteses)–in 1974 a raised maternal serum alpha-fetoprotein level accounted for only 4 per cent of these; by 1981 this had risen to 67 per cent. There were seven false-positive and 132 true-positive diagnoses of neural tube defect; since 1981, with the introduction of amniotic fluid acetylocholinesterase determination as a secondary diagnostic test for neural tube defects, there have been no further false-positive diagnoses. In 1981 76 per cent of women aged 35 years or more did not have an amniocentesis. It is not known to what extent this was due to not offering women in this age group amniocentesis or to women not accepting such an offer.