Simplified model for the evaluation of the effects of explosions on industrial target

The evaluation of vulnerability of process equipment to explosion is a central issue in the analysis of industrial risks. In this work, we have developed a simplified model, however based on fundamental equations, which includes structural and fluid–dynamic parameters for the target (the industrial equipment) and for the impacting pressure wave (shock waves) or object (fragment, debris) produced by different type of chemical explosions.The validity of methodology has been assessed by case histories. Several insights on the dynamic of structural interaction of the explosion with the target have been obtained, with specific reference to escalation effects.The model derives from the well-known Johnson's number, often adopted in impact engineering.     

Coupling effects of foam ceramics on the flame and shock wave of gas explosion

The coupling of gas explosion flame and shock wave is analyzed. In the gas explosion process, shock wave is affected by the flame directly, and shock wave also induces the flame. Inhibiting explosion can be achieved by the interference between the flame and shock wave propagation. If the coupling effects can be damaged, the adverse effects caused by the explosion should be mitigated and controlled. According to the structure characteristics of foam ceramics, the coupling effects mechanism of ceramic foam on gas explosion flame and shock wave is researched. When the explosion goes through the structure of foam ceramics, the flame can be quenched and the shock wave be attenuated. After the flame is quenched, the supply of precursor shock wave energy is cut off. Due to lack of energy supply, the destructive effects of blast wave will be reduced effectively. Coupling effects of the flame and shock wave can be damaged by the special structure of foam ceramics. Studies suggest that a certain function to represent the structure characteristics of foam ceramics must exist. For a certain material of foam ceramics, the sure porosity δ and the pore diameter d also can be get, which is the key to research and develop foam ceramic suppression technology of gas explosion.     

激波与森林作用的实验研究

利用激波与森林的作用,有可能成为森林灭火中的一项新技术,本文报告了激波与林带作用的实验模拟方法,实验技术与装备,测试和显示手段等基本技术环节。激波在林地,林带中的传播和衰减,以及其它物理现象由纹影方法作了显示。激波诱导的压力场也作了测量。研究表明,以激波管为基础的模拟技术是成功的,实验结果对于进一步认识激波与林冠火阵面的相互作用有很好的先导意义。     

电气线路火险隐患与运行设备故障隐患在线热诊断系统

研究根据电气线路和设备表面温度场的变化,通过建立数学模型和数据库,对电气线路和设备的故障隐患者在线诊断。集红外热象测试技术,传热学,电工学和计算机技术为一体,具有非接触,在线诊断,准确给出故障位置等特点,能精确发现温度场异常点,确定隐患等级,推测隐患的发展程度。     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

Transport of volatile compounds in porous media in the presence of a trapped gas phase

The presence of an immobile gaseous phase in an otherwise-saturated porous medium affects the transport of volatile compounds. The linear theory of partitioning tracers suggests that a volatile tracer introduced into such a system should be retarded with a constant retardation factor. Using high concentrations, however, the saturation of the gaseous phase will change as an effect of the tracer test itself. Competitive gas transfer among all volatile compounds and the change of saturation may lead to tracer concentrations that are temporarily higher than those injected. We analyze the system in the framework of the coherence theory by Helfferich [Soc. Pet. Eng. J. 21 (1) (1981) 51]. The governing equations are formulated as functions of total concentration, i.e., the mass of solutes in all phases per pore volume. Neglecting dispersion and mass-transfer kinetics, we derive the characteristic form of the resulting system of hyperbolic equations. In a system with N volatile compounds, a variation of the concentrations splits up into N waves, each traveling with its own characteristic velocity. If the presence of a gaseous phase is sustained, one wave will be a standing one. We perform numerical model calculations for tracers with various Henry's law coefficients and show that the results agree with the semi-analytical solution obtained by coherence theory.     

氨氮对污水场的冲击影响分析

分析了氨氮对污水场的冲击影响，并提出对策。     

Modelling of dust lifting process behind propagating shock wave

Dust dispersion from a layer is a complicated problem, which has not been completely solved yet, especially if an Eulerian–Eulerian approach has to be used to model the two-phase dusty flow. In previous investigation, a phenomenological model of the dust dispersion process from a layer was developed, but the evaluation of the model revealed some weaknesses. In the current paper, the model of the dust dispersion process was presented and three improvements of the model were studied: Saffman force, Magnus force and particles collisions. The implementation of Magnus and Saffman forces into the code did not improve the numerical results and it was shown that it had very little influence on the dust lifting process, in case the phenomenological model of the layer is used. Some explanations were proposed in the paper. Besides, an empirical model of particles collisions was also added to the code and its influence on the results was studied. It was shown that the particles collisions model improved the obtained results, but further modifications are to be studied in the future.     

丁烷与空气混合物的爆炸性能测定

在不同条件下,对丁烷与空气混合物进行爆炸实验,由微机数采测试系统测定其爆炸参数（爆轰波压力、爆轰波传播速度等）、爆轰极限以及当其形成爆轰时所需的临界起爆能。通过实验测定,为评价丁烷与空气混合物的安全性能提供重要依据     

装药尺寸对传爆药传爆可靠性的影响

采用锰铜测压实验测定了强约束及弱约束条件下 ,不同装药直径的传爆药HMX/F2 64 1的爆压 ,实验混合炸药密度为 90 %的理论密度 ,研究的装药直径范围为 1.5～ 5 .0mm ,初步揭示出传爆序列小型化装药尺寸对传爆药传爆可靠性的影响。研究结果对传爆序列小型化装药尺寸的确定及其传爆可靠性的评价 ,具有重要的参考价值