基于VBA的轻轿汽车滚形轮辋工艺设计系统

利用VBA开发了轻轿汽车滚形轮辋工艺设计系统。利用该系统,可以快速准确地进行轮辋下料尺寸以及工艺设计的自动计算。此程序在轮辋工艺设计中具有较大的现实意义。     

冷轧带钢在线磨辊辊面粗糙度的实验研究

对影响磨削辊面粗糙度的因素进行了系统分析和实验研究 ,得出了轧辊转速、砂轮速度、砂轮粒度、磨削液等因素对磨削辊面粗糙度影响的一般规律 ,利用回归分析的方法建立了粗糙度的数学模型     

某简易垃圾填埋场渗滤液在场底天然土层迁移模拟与长期预测

为了解我国早期建设的简易填埋堆场底部天然土层中污染物迁移状况,作者以安徽某填埋场为例,在前期现场勘查、取样和室内测试工作基础上建立了三维有限元分析模型,对宏量有机污染物COD在土层中的迁移状况进行了模拟分析.通过拟合求参获得COD在该场底土层中扩散系数、机械弥散系数和阻滞因子等运移参数的合理取值,在此基础上开展了污染物...     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

Accumulation and quantitative estimates of airborne lead for a wild plant (Aster subulatus)

Foliar uptake of airborne lead is one of the pathways for Pb accumulation in plant organs. However, the approximate contributions of airborne Pb to plant organs are still unclear. In the present study, aerosols (nine-stage size-segregated aerosols and total suspended particulates), a wild plant species (Aster subulatus) and the corresponding soils were collected and Pb contents and isotopic ratios in these samples were analyzed. Average concentration of Pb was 96.5 ± 63.5 ng m⁻³ in total suspended particulates (TSP) and 20.4 ± 5.5 ng m⁻³ in the fine fractions of size-segregated aerosols (SSA) (<2.1 μm), higher than that in the coarser fractions (>2.1 μm) (6.38 ± 3.71 ng m⁻³). Enrichment factors show that aerosols and soils suffered from anthropogenic inputs and the fine fractions of the size-segregated aerosols enriched more Pb than the coarse fractions. The order of Pb contents in A. subulatus was roots > leaves > stems. The linear relationship of Pb isotope ratios (²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb) among soil, plant and aerosol samples were found. Based on the simple binary Pb isotopic model using the mean ²⁰⁶Pb/²⁰⁷Pb ratios in TSP and in SSA, the approximate contributions of airborne Pb into plant leaves were 72.2% and 65.1%, respectively, suggesting that airborne Pb is the most important source for the Pb accumulation in leaves. So the combination of Pb isotope tracing and the simple binary Pb isotope model can assess the contribution of airborne Pb into plant leaves and may be of interest for risk assessment of the exposure to airborne Pb contamination.     

Toxic Effects of Crude Oil Combined with Oil Cleaner Simple Green on Yolk-sac Larvae and Adult Rainbow Trout Oncorhynchus mykiss (4 pp)

Background, Goal and Scope Cleaner CRYSTAL Simple Green (SG) was used for the cleanup of the oil spill in the Baltic Sea near Lithuania in 2001. No scientific data are available on the effects and consequences of its application for local aquatic life. The aim of this study was to determine and compare sublethal effects of a) solution SG; b) crude oil alone; c) SG in combination with oil on rainbow trout Oncorhynchus mykiss at different stages of its development in laboratory conditions.Methods Laboratory studies were performed on adult rainbow trout (4-day duration) and on yolk-sac larvae (25-day duration) evaluating their biological parameters. Concentrations of water-soluble and thin-dispersed fractions of petroleum hydrocarbons were measured using gas chromatography.Results and Discussion SG solution (0.5 mg/l) did not affect the survival of larvae and adult fish, and no significant changes were determined in respiratory parameters of the exposed larvae and adult fish. The most expressed alterations were found in morphological parameters (a decrease in the average body mass) of larvae and in haematological indices (a decrease in the leukocyte count) of adult fish at the end of the tests. Crude oil (1610 mg/l) did not affect the survival of adult fish during the 4-day exposure. An increase in larvae mortality rate (~ 36%) was recorded at the end of the tests. A significant decrease in the average body mass and heart rate of larvae as well as in gill ventilation frequency of larvae and adult fish were determined. SG combined with oil induced an increase in larval mortality &#61566; 46% of individuals died at the end of the tests. No mortality was recorded in adult fish. The average body mass and heart rate of larvae were significantly decreased. Marked changes were also found in respiratory parameters (gill ventilation frequency of larvae and adult fish significantly decreased, while “coughing” rate increased). A 1-day, 2-day exposure of fish to SG combined with oil induced a significant decrease in the leukocyte count of adult fish, which was also determined at the end of the tests. The augmentation of adverse impact could be explained by the data obtained from our studies. When SG was added into dilution water with crude oil the concentration of petroleum hydrocarbons in the mixture increased 3 ~ 4.5 times after 24 h and 96 h, respectively. Conclusions The comparative study of the effects of crude oil alone, SG and SG combined with oil showed that their toxic effects on fish differed. Oil combined with SG was found to be more toxic to fish (larvae and adults) than SG alone and oil alone. Fish at early stages of development (yolk-sac larvae) were more sensitive to the effects of the compounds studied than adults.Recommendations and Outlook To diminish the negative impact of oil spill cleanup using chemicals on aquatic ecosystems, it is recommended to carry out more comprehensive studies of their effects and after-effects in laboratory conditions using a wide scale of local aquatic organisms. The selected species of the most sensitive aquatic organisms should include those which are unable to escape the impact of combined action of oil and cleaners. Special attention should be directed to the research of effects of these pollutants on studied organisms at their most sensitive stages of life (reproduction, hatching, early stages of development), as after-effects of exposure to pollutants may be observed in future generations.     

用计算机模拟送进角与辗轧角对Accu-Roll轧机变形区的影响

在建立Accu-Roll轧机变形区模型的基础上,开发出计算机模拟软件,可方便地通过变形区纵剖面计算机图象显示分析工艺参数对变形区的影响,从而为合理地选取与优化工艺参数提供依据。     

轧辊辊型曲线的计算机辅助设计

用影响函数法确定普通四辊轧机辊系的弹性变形 ,用有限单元法确定工作辊的热凸度 ,在此基础上耦合求解轧辊原始辊型曲线 ,与现场使用的辊型曲线对比表明 :该法能较准确地快速确定轧辊的原始辊型     

钢铁厂冷轧废水污泥中铬回收实验研究

钢铁厂冷轧废水污泥中含有10%以上的铬、20%以上的铁和1.5%以上的锌(均以质量分数计).为了从污泥中回收铬,首先研究了污泥中铬的形态,确定为Cr(Ⅲ);然后以碳酸钠为氧化助剂,将污泥与碳酸钠按一定比例混合后焙烧,再用水浸取.研究了碳酸钠的添加量、焙烧温度和时间、浸取时间和浸取方式对铬回收率的影响.研究表明,每克干污泥中添加0.6 g或以上碳酸钠,在固定床上700 ℃焙烧4 h以上,可实现60%以上的总铬浸出率,残渣为Fe2O3基脱硫剂原料.     

BLEVE: Safety distances estimation by simple models based on the Jakob number

One of the most important points in the design of inherently safe processes is to estimate reliable distances among process units at preliminary stages of the plant project to minimize losses and damages caused by the potential occurrence of technological accidents. Therefore, in this paper the achievement of simple, general, dimensionless and reliable equations (Simple Dimensionless Models SDMs) for the direct estimation of safety distances considering the occurrence of BLEVE (Boiling Liquid Expanding Vapour Explosion) event, is proposed. The developed models directly relate safety distances with critical design/operation variables (involved substance, vessel volume, target vulnerability and explosion temperature), which are easily accessible at early stages of the plant project. SDMs are achieved by analysing the influence of these simple variables on the safety distances, which are estimated using a selected rigorous model (Reference Model R_fM). This task is simplified by the incorporation of the Jakob Number as an input variable, allowing to obtain dimensionless models and simultaneously an adequate representation of the explosion conditions and the involved substances. As result, the achieved SDMs demonstrate a particularly good fit with respect to the R_fM estimations and, at the same time, reliability and versatility. As it is shown in the analysed study cases (involving critical decision variables for the process design and the system safety), the SDMs prove to be also accurate, general, and easily incorporable into more complex optimization problems (QRA analysis, design of emergency plans, safety distance estimation to minimize the probability of domino effects, optimal layout designs, among others).